# \[PATCH v2 2/6\] clk: tegra: add TEGRA30\_CLK\_NOR to init table

- From: Marcel Ziswiler \<hidden\>
- Date: 2016-08-31 07:51:49 
- List: linux-arm-kernel
- Page: https://ratatoskr.run/linux-arm-kernel/2016/08/4825453
- Thread: https://ratatoskr.run/linux-devicetree/2016/08/4825453/t.md

```text
On Wed, 2016-08-24 at 15:37 +0200, Mirza Krak wrote:
> 
> From: Mirza Krak <redacted>
> 
> Add TEGRA30_CLK_NOR to init table and set default rate to 127 MHz
> which
> is max rate.
> 
> Signed-off-by: Mirza Krak <<redacted>
> mane.org>
> ---
> Changes in v2:
> - no changes
> 
> ?drivers/clk/tegra/clk-tegra30.c | 1 +
> ?1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-
> tegra30.c
> index 8e2db5e..67f1677 100644
> --- a/drivers/clk/tegra/clk-tegra30.c
> +++ b/drivers/clk/tegra/clk-tegra30.c
> @@ -1252,6 +1252,7 @@ static struct tegra_clk_init_table init_table[]
> __initdata = {
> ?	{ TEGRA30_CLK_SDMMC1, TEGRA30_CLK_PLL_P, 48000000, 0 },
> ?	{ TEGRA30_CLK_SDMMC2, TEGRA30_CLK_PLL_P, 48000000, 0 },
> ?	{ TEGRA30_CLK_SDMMC3, TEGRA30_CLK_PLL_P, 48000000, 0 },
> +	{ TEGRA30_CLK_NOR, TEGRA30_CLK_PLL_P, 127000000, 0 },

The Tegra 3 Interface Design Guide states the same 133 MHz.

> 
> ?	{ TEGRA30_CLK_PLL_M, TEGRA30_CLK_CLK_MAX, 0, 1 },
> ?	{ TEGRA30_CLK_PCLK, TEGRA30_CLK_CLK_MAX, 0, 1 },
> ?	{ TEGRA30_CLK_CSITE, TEGRA30_CLK_CLK_MAX, 0, 1 },
> --
> 2.1.4
```
