[RESEND PATCH v3 0/3] ARM: cleanup PCI specific configs

STALE3664d

Revision v3 of 4 in this series.

9 messages, 3 authors, 2016-08-30 · open the first message on its own page

[RESEND PATCH v3 0/3] ARM: cleanup PCI specific configs

From: Kishon Vijay Abraham I <hidden>
Date: 2016-08-10 18:18:07

This series was initially sent to add support for two PCIe
ports in dra7. This included selecting PCI_DOMAINS config
in SOC_DRA7XX.

However from the review, PCI_DOMAINS can instead be selected
from ARCH_MULTIPLATFORM. This is fixed in this series along
with removing PCI_DOMAINS from other configs.

Since this series was initially sent to add support for
two PCIe ports in dra7, it has been tested to see if there
are regressions with 1 PCIe port. Though testing of 2 PCIe ports
is not done while sending this patch series, it has been verified
before in few of the customer boards.

Changes from v2:
*) v2 removed MIGHT_HAVE_PCI from platforms that are not
   ARCH_MULTIPLATFORM. Fixed it in this version

Changes from v1:
*) select PCI_DOMAINS config from ARCH_MULTIPLATFORM
*) Fix *MIGHT_HAVE_PCI* config from being selected redundantly

Kishon Vijay Abraham I (3):
  ARM: dts: DRA7: Add "linux,pci-domain" property for pci dt nodes
  ARM: Fix *MIGHT_HAVE_PCI* config from being selected redundantly
  ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM

 arch/arm/Kconfig                 |    1 +
 arch/arm/boot/dts/dra7.dtsi      |    2 ++
 arch/arm/mach-at91/Kconfig       |    1 -
 arch/arm/mach-axxia/Kconfig      |    2 --
 arch/arm/mach-cns3xxx/Kconfig    |    1 -
 arch/arm/mach-exynos/Kconfig     |    2 --
 arch/arm/mach-imx/Kconfig        |    2 --
 arch/arm/mach-integrator/Kconfig |    1 -
 arch/arm/mach-keystone/Kconfig   |    2 --
 arch/arm/mach-shmobile/Kconfig   |    1 -
 arch/arm/mach-spear/Kconfig      |    1 -
 arch/arm/mach-versatile/Kconfig  |    1 -
 12 files changed, 3 insertions(+), 14 deletions(-)

-- 
1.7.9.5

Re: [RFT RESEND PATCH v3 2/3] ARM: Fix *MIGHT_HAVE_PCI* config from being selected redundantly

From: Krzysztof Kozlowski <hidden>
Date: 2016-08-10 19:18:56

On 08/10/2016 02:33 PM, Kishon Vijay Abraham I wrote:
*MIGHT_HAVE_PCI* config is already selected in ARCH_MULTIPLATFORM.
Fix it from getting redundantly selected in all
I don't like the "fix" here and in subject. There is no error, no
warning, no issue to be fixed. Fix might be a candidate to backport
(stable, vendor etc) but this just removes something which is not needed.

With the change in subject, for exynos:
Acked-by: Krzysztof Kozlowski <redacted>

Best regards,
Krzysztof

Re: [RFT RESEND PATCH v3 3/3] ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM

From: Krzysztof Kozlowski <hidden>
Date: 2016-08-10 19:36:08

On 08/10/2016 02:33 PM, Kishon Vijay Abraham I wrote:
PCI_DOMAINS config should be selected for any SoCs
having more than a single PCIe controller. Without PCI_DOMAINS
config, only one PCIe controller gets registered.

Select PCI_DOMAINS in ARCH_MULTIPLATFORM if PCI is selected, since
it doesn't harm even if a platform has a single PCIe port.
Also remove PCI_DOMAINS being selected from other platform
specific configs.

Signed-off-by: Kishon Vijay Abraham I <redacted>
---
 arch/arm/Kconfig               |    1 +
 arch/arm/mach-axxia/Kconfig    |    1 -
 arch/arm/mach-cns3xxx/Kconfig  |    1 -
 arch/arm/mach-exynos/Kconfig   |    1 -
 arch/arm/mach-imx/Kconfig      |    2 --
 arch/arm/mach-keystone/Kconfig |    1 -
 arch/arm/mach-shmobile/Kconfig |    1 -
 7 files changed, 1 insertion(+), 7 deletions(-)
For Exynos5440 output is equal and we do not use PCI on other SoCs, so:

Acked-by: Krzysztof Kozlowski <redacted>

Best regards,
Krzysztof

[RFT RESEND PATCH v3 3/3] ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM

From: Kishon Vijay Abraham I <hidden>
Date: 2016-08-10 20:30:42

PCI_DOMAINS config should be selected for any SoCs
having more than a single PCIe controller. Without PCI_DOMAINS
config, only one PCIe controller gets registered.

Select PCI_DOMAINS in ARCH_MULTIPLATFORM if PCI is selected, since
it doesn't harm even if a platform has a single PCIe port.
Also remove PCI_DOMAINS being selected from other platform
specific configs.

Signed-off-by: Kishon Vijay Abraham I <redacted>
---
 arch/arm/Kconfig               |    1 +
 arch/arm/mach-axxia/Kconfig    |    1 -
 arch/arm/mach-cns3xxx/Kconfig  |    1 -
 arch/arm/mach-exynos/Kconfig   |    1 -
 arch/arm/mach-imx/Kconfig      |    2 --
 arch/arm/mach-keystone/Kconfig |    1 -
 arch/arm/mach-shmobile/Kconfig |    1 -
 7 files changed, 1 insertion(+), 7 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a9c4e48..fb1b867 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -337,6 +337,7 @@ config ARCH_MULTIPLATFORM
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
 	select MULTI_IRQ_HANDLER
+	select PCI_DOMAINS if PCI
 	select SPARSE_IRQ
 	select USE_OF
 
diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig
index ee2e131..fe627cb 100644
--- a/arch/arm/mach-axxia/Kconfig
+++ b/arch/arm/mach-axxia/Kconfig
@@ -7,7 +7,6 @@ config ARCH_AXXIA
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER
 	select MFD_SYSCON
-	select PCI_DOMAINS if PCI
 	select ZONE_DMA
 	help
 	  This enables support for the LSI Axxia devices.
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index eb14a0f..5fd836b 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -2,7 +2,6 @@ menuconfig ARCH_CNS3XXX
 	bool "Cavium Networks CNS3XXX family"
 	depends on ARCH_MULTI_V6
 	select ARM_GIC
-	select PCI_DOMAINS if PCI
 	help
 	  Support for Cavium Networks CNS3XXX platform.
 
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index ee8a99c..18f0c85 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -126,7 +126,6 @@ config SOC_EXYNOS5440
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select HAVE_ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
-	select PCI_DOMAINS if PCI
 	select PINCTRL_EXYNOS5440
 	select PM_OPP
 	help
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index ee9a318..757cd11 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -523,7 +523,6 @@ config SOC_IMX6Q
 	select ARM_ERRATA_764369 if SMP
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD
-	select PCI_DOMAINS if PCI
 	select PINCTRL_IMX6Q
 	select SOC_IMX6
 
@@ -569,7 +568,6 @@ config SOC_LS1021A
 	bool "Freescale LS1021A support"
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER
-	select PCI_DOMAINS if PCI
 	select ZONE_DMA if ARM_LPAE
 	help
 	  This enables support for Freescale LS1021A processor.
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index 1507287..24bd64d 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -8,7 +8,6 @@ config ARCH_KEYSTONE
 	select COMMON_CLK_KEYSTONE
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ZONE_DMA if ARM_LPAE
-	select PCI_DOMAINS if PCI
 	select PINCTRL
 	help
 	  Support for boards based on the Texas Instruments Keystone family of
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 4a48c9f..09817ba 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -22,7 +22,6 @@ config ARCH_RCAR_GEN2
 	select PM_GENERIC_DOMAINS
 	select RENESAS_IRQC
 	select SYS_SUPPORTS_SH_CMT
-	select PCI_DOMAINS if PCI
 
 config ARCH_RMOBILE
 	bool
-- 
1.7.9.5

[RESEND PATCH v3 1/3] ARM: dts: DRA7: Add "linux,pci-domain" property for pci dt nodes

From: Kishon Vijay Abraham I <hidden>
Date: 2016-08-10 20:31:22

Since DRA7 has multiple PCIe Rootcomplex, add "linux,pci-domain"
property to assign a PCI domain number to each of the host
bridges.

Signed-off-by: Kishon Vijay Abraham I <redacted>
---
 arch/arm/boot/dts/dra7.dtsi |    2 ++
 1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index d9bfb94..8a45385 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -301,6 +301,7 @@
 					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
+				linux,pci-domain = <0>;
 				ti,hwmods = "pcie1";
 				phys = <&pcie1_phy>;
 				phy-names = "pcie-phy0";
@@ -336,6 +337,7 @@
 					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
+				linux,pci-domain = <1>;
 				ti,hwmods = "pcie2";
 				phys = <&pcie2_phy>;
 				phy-names = "pcie-phy0";
-- 
1.7.9.5

[RFT RESEND PATCH v3 2/3] ARM: Fix *MIGHT_HAVE_PCI* config from being selected redundantly

From: Kishon Vijay Abraham I <hidden>
Date: 2016-08-10 21:49:21

*MIGHT_HAVE_PCI* config is already selected in ARCH_MULTIPLATFORM.
Fix it from getting redundantly selected in all
ARCH_MULTIPLATFORM based machines.

Signed-off-by: Kishon Vijay Abraham I <redacted>
Acked-by: Alexandre Belloni <redacted>
---
 arch/arm/mach-at91/Kconfig       |    1 -
 arch/arm/mach-axxia/Kconfig      |    1 -
 arch/arm/mach-exynos/Kconfig     |    1 -
 arch/arm/mach-integrator/Kconfig |    1 -
 arch/arm/mach-keystone/Kconfig   |    1 -
 arch/arm/mach-spear/Kconfig      |    1 -
 arch/arm/mach-versatile/Kconfig  |    1 -
 7 files changed, 7 deletions(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 5204395..841e924 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -55,7 +55,6 @@ config SOC_AT91RM9200
 	select ATMEL_ST
 	select CPU_ARM920T
 	select HAVE_AT91_USB_CLK
-	select MIGHT_HAVE_PCI
 	select PINCTRL_AT91
 	select SOC_SAM_V4_V5
 	select SRAM if PM
diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig
index 6c6d5e7..ee2e131 100644
--- a/arch/arm/mach-axxia/Kconfig
+++ b/arch/arm/mach-axxia/Kconfig
@@ -7,7 +7,6 @@ config ARCH_AXXIA
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER
 	select MFD_SYSCON
-	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
 	select ZONE_DMA
 	help
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 8f820de..ee8a99c 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -126,7 +126,6 @@ config SOC_EXYNOS5440
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select HAVE_ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
-	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
 	select PINCTRL_EXYNOS5440
 	select PM_OPP
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index 599f973..cefe44f 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -21,7 +21,6 @@ if ARCH_INTEGRATOR
 config ARCH_INTEGRATOR_AP
 	bool "Support Integrator/AP and Integrator/PP2 platforms"
 	select INTEGRATOR_AP_TIMER
-	select MIGHT_HAVE_PCI
 	select SERIAL_AMBA_PL010 if TTY
 	select SERIAL_AMBA_PL010_CONSOLE if TTY
 	select SOC_BUS
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index 8ff61be..1507287 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -8,7 +8,6 @@ config ARCH_KEYSTONE
 	select COMMON_CLK_KEYSTONE
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ZONE_DMA if ARM_LPAE
-	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
 	select PINCTRL
 	help
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index b7260c2..1b6cae5 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -20,7 +20,6 @@ config ARCH_SPEAR13XX
 	select HAVE_ARM_TWD if SMP
 	select PINCTRL
 	select MFD_SYSCON
-	select MIGHT_HAVE_PCI
 	help
 	  Supports for ARM's SPEAR13XX family
 
diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index b0cc262..c257d40 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -9,7 +9,6 @@ config ARCH_VERSATILE
 	select CPU_ARM926T
 	select ICST
 	select MFD_SYSCON
-	select MIGHT_HAVE_PCI
 	select PLAT_VERSATILE
 	select POWER_RESET
 	select POWER_RESET_VERSATILE
-- 
1.7.9.5

Re: [RESEND PATCH v3 1/3] ARM: dts: DRA7: Add "linux,pci-domain" property for pci dt nodes

From: Tony Lindgren <tony@atomide.com>
Date: 2016-08-26 15:30:43

* Kishon Vijay Abraham I [off-list ref] [160810 05:34]:
Since DRA7 has multiple PCIe Rootcomplex, add "linux,pci-domain"
property to assign a PCI domain number to each of the host
bridges.
Is this patch safe to apply without the other changes?

Regards,

Tony

Re: [RESEND PATCH v3 1/3] ARM: dts: DRA7: Add "linux,pci-domain" property for pci dt nodes

From: Kishon Vijay Abraham I <hidden>
Date: 2016-08-30 11:07:09

Hi Tony,

On Friday 26 August 2016 09:00 PM, Tony Lindgren wrote:
* Kishon Vijay Abraham I [off-list ref] [160810 05:34]:
quoted
Since DRA7 has multiple PCIe Rootcomplex, add "linux,pci-domain"
property to assign a PCI domain number to each of the host
bridges.
Is this patch safe to apply without the other changes?
Yes. I verified pcie on dra7x by applying only this patch and it doesn't break
anything.

Thanks
Kishon

Re: [RESEND PATCH v3 1/3] ARM: dts: DRA7: Add "linux,pci-domain" property for pci dt nodes

From: Tony Lindgren <tony@atomide.com>
Date: 2016-08-30 18:47:11

* Kishon Vijay Abraham I [off-list ref] [160830 04:06]:
Hi Tony,

On Friday 26 August 2016 09:00 PM, Tony Lindgren wrote:
quoted
* Kishon Vijay Abraham I [off-list ref] [160810 05:34]:
quoted
Since DRA7 has multiple PCIe Rootcomplex, add "linux,pci-domain"
property to assign a PCI domain number to each of the host
bridges.
Is this patch safe to apply without the other changes?
Yes. I verified pcie on dra7x by applying only this patch and it doesn't break
anything.
OK thanks for testing, I'm picking the dts change into omap-for-v4.9/dt
branch.

The other patches you probably should upload to RMKs patch system
if no more comments.

Regards,

Tony
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help