[PATCH v2] arm64: dts: mt8173: add mmsel clocks for 4K support
From: Bibby Hsieh <hidden>
Date: 2016-07-27 07:58:35
Also in:
linux-devicetree, linux-mediatek, lkml
Subsystem:
arm/mediatek soc support, the rest · Maintainers:
Matthias Brugger, AngeloGioacchino Del Regno, Linus Torvalds
If MT8173 can support HDMI 4K resoultion, the VENCPLL should be configured to 800MHZ. We didn't set VENCPLL directly, we set the mm_sel to 400MHz statically in the board device tree. Changes since v1: - Do not set the VENCPLL by clk_set_rate at display driver. - Configure the mm_sel to 400MHz statically in the board device tree. Signed-off-by: Bibby Hsieh <redacted> --- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 78529e4..e89aca6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi@@ -690,6 +690,8 @@ compatible = "mediatek,mt8173-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mmsel"; #clock-cells = <1>; };
@@ -858,8 +860,8 @@ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DPI_PIXEL>, - <&mmsys CLK_MM_DPI_ENGINE>, - <&apmixedsys CLK_APMIXED_TVDPLL>; + <&mmsys CLK_MM_DPI_ENGINE>, + <&apmixedsys CLK_APMIXED_TVDPLL>; clock-names = "pixel", "engine", "pll"; status = "disabled"; };
--
1.7.9.5