# \[PATCH v0 01/10\] arm: orion5x: Add required properties for orion-wdt to DT node

- From: Andrew Lunn \<andrew@lunn.ch\>
- Date: 2016-07-16 16:04:07 
- List: linux-arm-kernel
- Page: https://ratatoskr.run/linux-arm-kernel/2016/07/4796434
- Thread: https://ratatoskr.run/linux-devicetree/2016/07/4796413/t.md

```text
On Sat, Jul 16, 2016 at 03:28:59PM +0100, Jamie Lentin wrote:
> orion-wdt refuses to start without these properties defined, so lift
> definitions out of kirkwood/dove.dtsi
> 
> Signed-off-by: Jamie Lentin <redacted>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew


> ---
>  arch/arm/boot/dts/orion5x.dtsi | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
> index e1b6d2a..fbccfbb 100644
> --- a/arch/arm/boot/dts/orion5x.dtsi
> +++ b/arch/arm/boot/dts/orion5x.dtsi
> @@ -144,9 +144,10 @@
>  
>  			wdt: wdt at 20300 {
>  				compatible = "marvell,orion-wdt";
> -				reg = <0x20300 0x28>;
> +				reg = <0x20300 0x28>, <0x20108 0x4>;
>  				interrupt-parent = <&bridge_intc>;
>  				interrupts = <3>;
> +				clocks = <&core_clk 0>;
>  				status = "okay";
>  			};
>  
> -- 
> 2.8.1
> 
```