[PATCH v2 2/6] clk: mvebu: Add the xtal clock for Armada 3700 SoC
From: mturquette@baylibre.com (Michael Turquette)
Date: 2016-07-08 17:33:08
Also in:
linux-clk, linux-devicetree, lkml
Quoting Gregory CLEMENT (2016-07-07 15:37:47)
quoted hunk ↗ jump to hunk
This clock is the parent of all the Armada 3700 clocks. It is a fixed rate clock which depends on the gpio configuration read when resetting the SoC. Signed-off-by: Gregory CLEMENT <redacted> --- drivers/clk/mvebu/Kconfig | 3 ++ drivers/clk/mvebu/Makefile | 1 + drivers/clk/mvebu/armada-37xx-xtal.c | 98 ++++++++++++++++++++++++++++++++++++ 3 files changed, 102 insertions(+) create mode 100644 drivers/clk/mvebu/armada-37xx-xtal.cdiff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig index 3165da77d525..fddc8ac5faff 100644 --- a/drivers/clk/mvebu/Kconfig +++ b/drivers/clk/mvebu/Kconfig@@ -24,6 +24,9 @@ config ARMADA_39X_CLK bool select MVEBU_CLK_COMMON +config ARMADA_37XX_CLK + bool + config ARMADA_XP_CLK bool select MVEBU_CLK_COMMONdiff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile index 7172ef65693d..4257a36d0219 100644 --- a/drivers/clk/mvebu/Makefile +++ b/drivers/clk/mvebu/Makefile@@ -6,6 +6,7 @@ obj-$(CONFIG_ARMADA_370_CLK) += armada-370.o obj-$(CONFIG_ARMADA_375_CLK) += armada-375.o obj-$(CONFIG_ARMADA_38X_CLK) += armada-38x.o obj-$(CONFIG_ARMADA_39X_CLK) += armada-39x.o +obj-$(CONFIG_ARMADA_37XX_CLK) += armada-37xx-xtal.o obj-$(CONFIG_ARMADA_XP_CLK) += armada-xp.o obj-$(CONFIG_ARMADA_AP806_SYSCON) += ap806-system-controller.o obj-$(CONFIG_ARMADA_CP110_SYSCON) += cp110-system-controller.odiff --git a/drivers/clk/mvebu/armada-37xx-xtal.c b/drivers/clk/mvebu/armada-37xx-xtal.c new file mode 100644 index 000000000000..f832c219420f --- /dev/null +++ b/drivers/clk/mvebu/armada-37xx-xtal.c@@ -0,0 +1,98 @@ +/* + * Marvell Armada 37xx SoC xtal clocks + * + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h>
Is clk.h necessary? Is this driver also a clock consumer? Regards, Mike
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define NB_GPIO1_LATCH 0xC
+#define XTAL_MODE BIT(31)
+
+static int armada_3700_xtal_clock_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ const char *xtal_name = "xtal";
+ struct device_node *parent;
+ struct regmap *regmap;
+ struct clk_hw *xtal_hw;
+ unsigned int rate;
+ u32 reg;
+ int ret;
+
+ xtal_hw = devm_kzalloc(&pdev->dev, sizeof(*xtal_hw), GFP_KERNEL);
+ if (!xtal_hw)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, xtal_hw);
+
+ parent = np->parent;
+ if (!parent) {
+ dev_err(&pdev->dev, "no parent\n");
+ return -ENODEV;
+ }
+
+ regmap = syscon_node_to_regmap(parent);
+ if (IS_ERR(regmap)) {
+ dev_err(&pdev->dev, "cannot get regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ ret = regmap_read(regmap, NB_GPIO1_LATCH, ®);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot read from regmap\n");
+ return ret;
+ }
+
+ if (reg & XTAL_MODE)
+ rate = 40000000;
+ else
+ rate = 25000000;
+
+ of_property_read_string_index(np, "clock-output-names", 0, &xtal_name);
+ xtal_hw = clk_hw_register_fixed_rate(NULL, xtal_name, NULL, 0, rate);
+ if (IS_ERR(xtal_hw))
+ return PTR_ERR(xtal_hw);
+ ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, xtal_hw);
+
+ return ret;
+}
+
+static int armada_3700_xtal_clock_remove(struct platform_device *pdev)
+{
+ of_clk_del_provider(pdev->dev.of_node);
+
+ return 0;
+}
+
+static const struct of_device_id armada_3700_xtal_clock_of_match[] = {
+ { .compatible = "marvell,armada-3700-xtal-clock", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, armada_3700_xtal_clock_of_match);
+
+static struct platform_driver armada_3700_xtal_clock_driver = {
+ .probe = armada_3700_xtal_clock_probe,
+ .remove = armada_3700_xtal_clock_remove,
+ .driver = {
+ .name = "marvell-armada-3700-xtal-clock",
+ .of_match_table = armada_3700_xtal_clock_of_match,
+ },
+};
+
+module_platform_driver(armada_3700_xtal_clock_driver);
+
+MODULE_AUTHOR("Gregory CLEMENT [off-list ref]");
+MODULE_DESCRIPTION("Marvell Armada 37xx SoC xtal clocks driver");
+MODULE_LICENSE("GPL v2");
--
2.5.0