[PATCH 1/4] ARM: dts: sun5i: Enable otg on the auxtex t004
From: Hans de Goede <hidden>
Date: 2016-06-29 18:46:59
Also in:
linux-devicetree
Subsystem:
the rest · Maintainer:
Linus Torvalds
The auxtek t004 has its otg usb vbus hardwired to 5v (likely in case people use it to power the board instead of the dedicated power micro usb connector), it does have an id pin, so it allows full otg functionality. Signed-off-by: Hans de Goede <redacted> --- arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
index e15d1ef..7ddebce 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts@@ -130,7 +130,18 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { + usb0_id_detect_pin: usb0_id_detect_pin at 0 { + allwinner,pins = "PG12"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + mmc0_cd_pin_t004: mmc0_cd_pin at 0 { allwinner,pins = "PG1"; allwinner,function = "gpio_in";
@@ -164,11 +175,19 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usb1_vbus_pin_a { allwinner,pins = "PG13"; }; &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; };
--
2.7.4