The Denx MA5D4 dts doesn't properly define the slow_xtal and main_xtal
frequencies, the PMC then has to fallback to using the RC oscillators whose
precision is not really good.
As both crystals are populated, define their frequencies, see p17 of
http://www.denx-cs.de/sites/all/files/MA5D4.HWM_.002.pdf
Also, remove the obsolete main_clock definition.
Signed-off-by: Alexandre Belloni <redacted>
---
arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
index e7b2109fc85a..99d57131782f 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
@@ -20,8 +20,11 @@
};
clocks {
- main_clock: main_clock {
- compatible = "atmel,osc", "fixed-clock";
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
clock-frequency = <12000000>;
};
--
2.8.1
On 06/08/2016 01:31 AM, Alexandre Belloni wrote:
The Denx MA5D4 dts doesn't properly define the slow_xtal and main_xtal
frequencies, the PMC then has to fallback to using the RC oscillators whose
precision is not really good.
As both crystals are populated, define their frequencies, see p17 of
http://www.denx-cs.de/sites/all/files/MA5D4.HWM_.002.pdf
Also, remove the obsolete main_clock definition.
Signed-off-by: Alexandre Belloni <redacted>
That's correct, I had similar patch in my tree.
Acked-by: Marek Vasut <marex@denx.de>
Thanks!
quoted hunk
---
arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
index e7b2109fc85a..99d57131782f 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
@@ -20,8 +20,11 @@
};
clocks {
- main_clock: main_clock {
- compatible = "atmel,osc", "fixed-clock";
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
clock-frequency = <12000000>;
};
--
Best regards,
Marek Vasut
On 08/06/2016 at 01:31:19 +0200, Alexandre Belloni wrote :
The Denx MA5D4 dts doesn't properly define the slow_xtal and main_xtal
frequencies, the PMC then has to fallback to using the RC oscillators whose
precision is not really good.
As both crystals are populated, define their frequencies, see p17 of
http://www.denx-cs.de/sites/all/files/MA5D4.HWM_.002.pdf
Also, remove the obsolete main_clock definition.
Signed-off-by: Alexandre Belloni <redacted>
---
arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
Applied.
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com