Re: [PATCH] ARM: dts: sun6i: Add serial0 alias and stdout-path to a31s-primo81.dts

On Thu, Mar 17, 2016 at 02:28:03PM +0800, Chen-Yu Tsai wrote:

On Wed, Mar 16, 2016 at 10:19 PM, Hans de Goede [off-list ref] wrote:

quoted

u-boot uses the kernel as the canonical source for its sunxi dts files
and u-boot needs these.

Signed-off-by: Hans de Goede <redacted>

Acked-by: Chen-Yu Tsai <redacted>

Queued, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160318/3e95778f/attachment-0001.sig>

Hi,

On 18-03-16 18:48, Maxime Ripard wrote:

On Thu, Mar 17, 2016 at 02:28:03PM +0800, Chen-Yu Tsai wrote:

quoted

On Wed, Mar 16, 2016 at 10:19 PM, Hans de Goede [off-list ref] wrote:

quoted

u-boot uses the kernel as the canonical source for its sunxi dts files
and u-boot needs these.

Signed-off-by: Hans de Goede <redacted>

Acked-by: Chen-Yu Tsai <redacted>

Queued, thanks!

I just got an of-list mail from Karsten Merker that you nacked the addition
if this during the initial submission, because there are no accessible uart
test pads on this tablet.

In that case the proper fix would be to change the u-boot defconfig to have:

# CONFIG_REQUIRE_SERIAL_CONSOLE is not set

Which will stop u-boot from panicking (with nowhere to print the panic msg)
when it has no stdout-path.

Can you unqueue this one until we've figured out what the best fix is ?

Thanks & Regards,

Hans