[PATCH] mmc: mediatek: add SD write protect support

Subsystems: mediatek mmc/sd/sdio driver, multimedia card (mmc), secure digital (sd) and sdio subsystem, the rest

STALE3857d

2 messages, 2 authors, 2016-02-16 · open the first message on its own page

[PATCH] mmc: mediatek: add SD write protect support

From: Chaotian Jing <chaotian.jing@mediatek.com>
Date: 2016-02-15 02:31:36

use mmc core layer's API to support sd write protect

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
 drivers/mmc/host/mtk-sd.c | 2 ++
 1 file changed, 2 insertions(+)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 82a97ac..f01972e 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -35,6 +35,7 @@
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/sd.h>
 #include <linux/mmc/sdio.h>
+#include <linux/mmc/slot-gpio.h>
 
 #define MAX_BD_NUM          1024
 
@@ -1452,6 +1453,7 @@ static struct mmc_host_ops mt_msdc_ops = {
 	.pre_req = msdc_pre_req,
 	.request = msdc_ops_request,
 	.set_ios = msdc_ops_set_ios,
+	.get_ro = mmc_gpio_get_ro,
 	.start_signal_voltage_switch = msdc_ops_switch_volt,
 	.card_busy = msdc_card_busy,
 	.execute_tuning = msdc_execute_tuning,
-- 
1.8.1.1.dirty

Re: [PATCH] mmc: mediatek: add SD write protect support

From: Ulf Hansson <hidden>
Date: 2016-02-16 16:35:38

On 14 February 2016 at 19:31, Chaotian Jing [off-list ref] wrote:
use mmc core layer's API to support sd write protect

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Thanks, applied for next!

Kind regards
Uffe
quoted hunk
---
 drivers/mmc/host/mtk-sd.c | 2 ++
 1 file changed, 2 insertions(+)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 82a97ac..f01972e 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -35,6 +35,7 @@
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/sd.h>
 #include <linux/mmc/sdio.h>
+#include <linux/mmc/slot-gpio.h>

 #define MAX_BD_NUM          1024
@@ -1452,6 +1453,7 @@ static struct mmc_host_ops mt_msdc_ops = {
        .pre_req = msdc_pre_req,
        .request = msdc_ops_request,
        .set_ios = msdc_ops_set_ios,
+       .get_ro = mmc_gpio_get_ro,
        .start_signal_voltage_switch = msdc_ops_switch_volt,
        .card_busy = msdc_card_busy,
        .execute_tuning = msdc_execute_tuning,
--
1.8.1.1.dirty
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help