[PATCH v3 0/7] ARM: dts: kirkwood: fixes and split of linkstation dts for ls-wvl/vl and ls-wxl/wsxl

Hi Roger,
 
 On jeu., janv. 21 2016, Roger Shimizu [off-list ref] wrote:

Dear kirkwood maintainers,

Linkstation dts for ls-wxl and ls-wvl need some fixes:
  - [patch 1/7] and [patch 2/7] are fixes for gpio pin
  - [patch 3/7] and [patch 4/7] are fixes for gpio led
Above 4 patches can be safely backported to 4.3/4.4 stable kernel.

And in order to support more buffalo linkstation devices in convenient way,
I split current 2 dts files into a few comoon dtsi files and device specific
dts files.
  - [patch 5/7] relicense dts under GPLv2/X11
  - [patch 6/7] split dts for lswxl
  - [patch 7/7] split dts for lswvl

Changes in v2:
  - separate the fix and relicense patch
  - add "linkstation:" to all led labels
Changes in v3:
  - address Andrew Lunn's suggestion to change commit message
    for [patch 3/7] and [patch 4/7]
  - add Andrew Lunn's "Reviewed-by"
  - address active high/low for the power LED

I will apply this series on the mvebu branches when v4.5-rc1 will be
released (so it should be the next week).

Thanks,

Greogry

Cheers.

Roger Shimizu (7):
  ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wxl/wsxl
  ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wvl/vl
  ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wxl/wsxl
  ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vl
  ARM: dts: kirkwood: relicense dts of ls-wvl/vl and ls-wxl/wsxl under
    GPLv2/X11
  ARM: dts: kirkwood: split lswxl dts to linkstation lswsxl and lswxl
  ARM: dts: kirkwood: split lswvl dts to linkstation lsvl and lswvl

 .../devicetree/bindings/arm/marvell,kirkwood.txt   |   6 +-
 arch/arm/boot/dts/Makefile                         |   6 +-
 arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi   | 192 +++++++++++++
 .../boot/dts/kirkwood-linkstation-duo-6281.dtsi    | 186 +++++++++++++
 arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts    |  57 ++++
 arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts  |  57 ++++
 arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts   | 112 ++++++++
 arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts   | 116 ++++++++
 arch/arm/boot/dts/kirkwood-linkstation.dtsi        | 202 ++++++++++++++
 arch/arm/boot/dts/kirkwood-lswvl.dts               | 301 ---------------------
 arch/arm/boot/dts/kirkwood-lswxl.dts               | 301 ---------------------
 11 files changed, 930 insertions(+), 606 deletions(-)
 create mode 100644 arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi
 create mode 100644 arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi
 create mode 100644 arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-linkstation.dtsi
 delete mode 100644 arch/arm/boot/dts/kirkwood-lswvl.dts
 delete mode 100644 arch/arm/boot/dts/kirkwood-lswxl.dts

-- 
2.1.4

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

On Fri, Jan 22, 2016 at 1:00 AM, Gregory CLEMENT
[off-list ref] wrote:

Hi Roger,

 On jeu., janv. 21 2016, Roger Shimizu [off-list ref] wrote:

quoted

Dear kirkwood maintainers,

Linkstation dts for ls-wxl and ls-wvl need some fixes:
  - [patch 1/7] and [patch 2/7] are fixes for gpio pin
  - [patch 3/7] and [patch 4/7] are fixes for gpio led
Above 4 patches can be safely backported to 4.3/4.4 stable kernel.

And in order to support more buffalo linkstation devices in convenient way,
I split current 2 dts files into a few comoon dtsi files and device specific
dts files.
  - [patch 5/7] relicense dts under GPLv2/X11
  - [patch 6/7] split dts for lswxl
  - [patch 7/7] split dts for lswvl

Changes in v2:
  - separate the fix and relicense patch
  - add "linkstation:" to all led labels
Changes in v3:
  - address Andrew Lunn's suggestion to change commit message
    for [patch 3/7] and [patch 4/7]
  - add Andrew Lunn's "Reviewed-by"
  - address active high/low for the power LED

I will apply this series on the mvebu branches when v4.5-rc1 will be
released (so it should be the next week).

Dear Gregory,

Thanks for your feedback!

Just curious,
since patch 0001~0004 are fixes, could it be applied earlier?

Cheers,
Roger