[PATCH 2/3] ARM: dts: imx6*-hummingboard: use proper gpio flags definitions
DORMANTno replies
From: Russell King <hidden>
Date: 2016-01-27 20:23:55
Also in:
linux-devicetree
Subsystem:
the rest · Maintainer:
Linus Torvalds
Use proper gpio flag definitions for GPIOs rather than using opaque uninformative numbers. Signed-off-by: Russell King <redacted> --- arch/arm/boot/dts/imx6qdl-hummingboard.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 81be050c8d3c..3a06516fe7a9 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi@@ -48,7 +48,7 @@ ir_recv: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio3 5 1>; + gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>; };
@@ -67,7 +67,7 @@ reg_usbh1_vbus: usb-h1-vbus { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio1 0 0>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; regulator-name = "usb_h1_vbus";
@@ -78,7 +78,7 @@ reg_usbotg_vbus: usb-otg-vbus { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; regulator-name = "usb_otg_vbus";
--
2.1.0