[PATCH v4 1/7] mtd: spi-nor: fsl-quadspi: add big-endian support

Subsystems: memory technology devices (mtd), spi nor subsystem, the rest

STALE3870d REVIEWED: 1 (0M)

1 review trailer.

17 messages, 4 authors, 2016-03-08 · open the first message on its own page

[PATCH v4 1/7] mtd: spi-nor: fsl-quadspi: add big-endian support

From: Yuan Yao <hidden>
Date: 2016-01-26 07:32:24 

Add R/W functions for big- or little-endian registers:
The qSPI controller's endian is independent of the CPU core's endian.
So far, the qSPI have two versions for big-endian and little-endian.

Signed-off-by: Yuan Yao <redacted>
Acked-by: Han xu <redacted>
---
Changed in v4:
No changes.

Changed in v3:
Update my email to [off-list ref]

Changed in v2:
Rebase to the lastest code.
---
 drivers/mtd/spi-nor/fsl-quadspi.c | 157 +++++++++++++++++++++++---------------
 1 file changed, 97 insertions(+), 60 deletions(-)

diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 54640f1..04e8a93 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -275,6 +275,7 @@ struct fsl_qspi {
 	u32 clk_rate;
 	unsigned int chip_base_addr; /* We may support two chips. */
 	bool has_second_chip;
+	bool big_endian;
 	struct mutex lock;
 	struct pm_qos_request pm_qos_req;
 };
@@ -300,6 +301,28 @@ static inline int needs_wakeup_wait_mode(struct fsl_qspi *q)
 }
 
 /*
+ * R/W functions for big- or little-endian registers:
+ * The qSPI controller's endian is independent of the CPU core's endian.
+ * So far, although the CPU core is little-endian but the qSPI have two
+ * versions for big-endian and little-endian.
+ */
+static void qspi_writel(struct fsl_qspi *q, u32 val, void __iomem *addr)
+{
+	if (q->big_endian)
+		iowrite32be(val, addr);
+	else
+		iowrite32(val, addr);
+}
+
+static u32 qspi_readl(struct fsl_qspi *q, void __iomem *addr)
+{
+	if (q->big_endian)
+		return ioread32be(addr);
+	else
+		return ioread32(addr);
+}
+
+/*
  * An IC bug makes us to re-arrange the 32-bit data.
  * The following chips, such as IMX6SLX, have fixed this bug.
  */
@@ -310,14 +333,14 @@ static inline u32 fsl_qspi_endian_xchg(struct fsl_qspi *q, u32 a)
 
 static inline void fsl_qspi_unlock_lut(struct fsl_qspi *q)
 {
-	writel(QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
-	writel(QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR);
+	qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
+	qspi_writel(q, QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR);
 }
 
 static inline void fsl_qspi_lock_lut(struct fsl_qspi *q)
 {
-	writel(QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
-	writel(QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR);
+	qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
+	qspi_writel(q, QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR);
 }
 
 static irqreturn_t fsl_qspi_irq_handler(int irq, void *dev_id)
@@ -326,8 +349,8 @@ static irqreturn_t fsl_qspi_irq_handler(int irq, void *dev_id)
 	u32 reg;
 
 	/* clear interrupt */
-	reg = readl(q->iobase + QUADSPI_FR);
-	writel(reg, q->iobase + QUADSPI_FR);
+	reg = qspi_readl(q, q->iobase + QUADSPI_FR);
+	qspi_writel(q, reg, q->iobase + QUADSPI_FR);
 
 	if (reg & QUADSPI_FR_TFF_MASK)
 		complete(&q->c);
@@ -348,7 +371,7 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
 
 	/* Clear all the LUT table */
 	for (i = 0; i < QUADSPI_LUT_NUM; i++)
-		writel(0, base + QUADSPI_LUT_BASE + i * 4);
+		qspi_writel(q, 0, base + QUADSPI_LUT_BASE + i * 4);
 
 	/* Quad Read */
 	lut_base = SEQID_QUAD_READ * 4;
@@ -364,14 +387,15 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
 		dummy = 8;
 	}
 
-	writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+	qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
 			base + QUADSPI_LUT(lut_base));
-	writel(LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo),
+	qspi_writel(q, LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo),
 			base + QUADSPI_LUT(lut_base + 1));
 
 	/* Write enable */
 	lut_base = SEQID_WREN * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_WREN), base + QUADSPI_LUT(lut_base));
+	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WREN),
+			base + QUADSPI_LUT(lut_base));
 
 	/* Page Program */
 	lut_base = SEQID_PP * 4;
@@ -385,13 +409,15 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
 		addrlen = ADDR32BIT;
 	}
 
-	writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+	qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
 			base + QUADSPI_LUT(lut_base));
-	writel(LUT0(FSL_WRITE, PAD1, 0), base + QUADSPI_LUT(lut_base + 1));
+	qspi_writel(q, LUT0(FSL_WRITE, PAD1, 0),
+			base + QUADSPI_LUT(lut_base + 1));
 
 	/* Read Status */
 	lut_base = SEQID_RDSR * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_RDSR) | LUT1(FSL_READ, PAD1, 0x1),
+	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDSR) |
+			LUT1(FSL_READ, PAD1, 0x1),
 			base + QUADSPI_LUT(lut_base));
 
 	/* Erase a sector */
@@ -400,40 +426,46 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
 	cmd = q->nor[0].erase_opcode;
 	addrlen = q->nor_size <= SZ_16M ? ADDR24BIT : ADDR32BIT;
 
-	writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+	qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
 			base + QUADSPI_LUT(lut_base));
 
 	/* Erase the whole chip */
 	lut_base = SEQID_CHIP_ERASE * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE),
+	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE),
 			base + QUADSPI_LUT(lut_base));
 
 	/* READ ID */
 	lut_base = SEQID_RDID * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_RDID) | LUT1(FSL_READ, PAD1, 0x8),
+	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDID) |
+			LUT1(FSL_READ, PAD1, 0x8),
 			base + QUADSPI_LUT(lut_base));
 
 	/* Write Register */
 	lut_base = SEQID_WRSR * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_WRSR) | LUT1(FSL_WRITE, PAD1, 0x2),
+	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WRSR) |
+			LUT1(FSL_WRITE, PAD1, 0x2),
 			base + QUADSPI_LUT(lut_base));
 
 	/* Read Configuration Register */
 	lut_base = SEQID_RDCR * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_RDCR) | LUT1(FSL_READ, PAD1, 0x1),
+	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDCR) |
+			LUT1(FSL_READ, PAD1, 0x1),
 			base + QUADSPI_LUT(lut_base));
 
 	/* Write disable */
 	lut_base = SEQID_WRDI * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_WRDI), base + QUADSPI_LUT(lut_base));
+	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WRDI),
+			base + QUADSPI_LUT(lut_base));
 
 	/* Enter 4 Byte Mode (Micron) */
 	lut_base = SEQID_EN4B * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_EN4B), base + QUADSPI_LUT(lut_base));
+	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_EN4B),
+			base + QUADSPI_LUT(lut_base));
 
 	/* Enter 4 Byte Mode (Spansion) */
 	lut_base = SEQID_BRWR * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_BRWR), base + QUADSPI_LUT(lut_base));
+	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_BRWR),
+			base + QUADSPI_LUT(lut_base));
 
 	fsl_qspi_lock_lut(q);
 }
@@ -488,15 +520,16 @@ fsl_qspi_runcmd(struct fsl_qspi *q, u8 cmd, unsigned int addr, int len)
 			q->chip_base_addr, addr, len, cmd);
 
 	/* save the reg */
-	reg = readl(base + QUADSPI_MCR);
+	reg = qspi_readl(q, base + QUADSPI_MCR);
 
-	writel(q->memmap_phy + q->chip_base_addr + addr, base + QUADSPI_SFAR);
-	writel(QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS,
+	qspi_writel(q, q->memmap_phy + q->chip_base_addr + addr,
+			base + QUADSPI_SFAR);
+	qspi_writel(q, QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS,
 			base + QUADSPI_RBCT);
-	writel(reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR);
+	qspi_writel(q, reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR);
 
 	do {
-		reg2 = readl(base + QUADSPI_SR);
+		reg2 = qspi_readl(q, base + QUADSPI_SR);
 		if (reg2 & (QUADSPI_SR_IP_ACC_MASK | QUADSPI_SR_AHB_ACC_MASK)) {
 			udelay(1);
 			dev_dbg(q->dev, "The controller is busy, 0x%x\n", reg2);
@@ -507,21 +540,22 @@ fsl_qspi_runcmd(struct fsl_qspi *q, u8 cmd, unsigned int addr, int len)
 
 	/* trigger the LUT now */
 	seqid = fsl_qspi_get_seqid(q, cmd);
-	writel((seqid << QUADSPI_IPCR_SEQID_SHIFT) | len, base + QUADSPI_IPCR);
+	qspi_writel(q, (seqid << QUADSPI_IPCR_SEQID_SHIFT) | len,
+			base + QUADSPI_IPCR);
 
 	/* Wait for the interrupt. */
 	if (!wait_for_completion_timeout(&q->c, msecs_to_jiffies(1000))) {
 		dev_err(q->dev,
 			"cmd 0x%.2x timeout, addr@%.8x, FR:0x%.8x, SR:0x%.8x\n",
-			cmd, addr, readl(base + QUADSPI_FR),
-			readl(base + QUADSPI_SR));
+			cmd, addr, qspi_readl(q, base + QUADSPI_FR),
+			qspi_readl(q, base + QUADSPI_SR));
 		err = -ETIMEDOUT;
 	} else {
 		err = 0;
 	}
 
 	/* restore the MCR */
-	writel(reg, base + QUADSPI_MCR);
+	qspi_writel(q, reg, base + QUADSPI_MCR);
 
 	return err;
 }
@@ -533,7 +567,7 @@ static void fsl_qspi_read_data(struct fsl_qspi *q, int len, u8 *rxbuf)
 	int i = 0;
 
 	while (len > 0) {
-		tmp = readl(q->iobase + QUADSPI_RBDR + i * 4);
+		tmp = qspi_readl(q, q->iobase + QUADSPI_RBDR + i * 4);
 		tmp = fsl_qspi_endian_xchg(q, tmp);
 		dev_dbg(q->dev, "chip addr:0x%.8x, rcv:0x%.8x\n",
 				q->chip_base_addr, tmp);
@@ -561,9 +595,9 @@ static inline void fsl_qspi_invalid(struct fsl_qspi *q)
 {
 	u32 reg;
 
-	reg = readl(q->iobase + QUADSPI_MCR);
+	reg = qspi_readl(q, q->iobase + QUADSPI_MCR);
 	reg |= QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK;
-	writel(reg, q->iobase + QUADSPI_MCR);
+	qspi_writel(q, reg, q->iobase + QUADSPI_MCR);
 
 	/*
 	 * The minimum delay : 1 AHB + 2 SFCK clocks.
@@ -572,7 +606,7 @@ static inline void fsl_qspi_invalid(struct fsl_qspi *q)
 	udelay(1);
 
 	reg &= ~(QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK);
-	writel(reg, q->iobase + QUADSPI_MCR);
+	qspi_writel(q, reg, q->iobase + QUADSPI_MCR);
 }
 
 static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor,
@@ -586,20 +620,20 @@ static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor,
 		q->chip_base_addr, to, count);
 
 	/* clear the TX FIFO. */
-	tmp = readl(q->iobase + QUADSPI_MCR);
-	writel(tmp | QUADSPI_MCR_CLR_TXF_MASK, q->iobase + QUADSPI_MCR);
+	tmp = qspi_readl(q, q->iobase + QUADSPI_MCR);
+	qspi_writel(q, tmp | QUADSPI_MCR_CLR_TXF_MASK, q->iobase + QUADSPI_MCR);
 
 	/* fill the TX data to the FIFO */
 	for (j = 0, i = ((count + 3) / 4); j < i; j++) {
 		tmp = fsl_qspi_endian_xchg(q, *txbuf);
-		writel(tmp, q->iobase + QUADSPI_TBDR);
+		qspi_writel(q, tmp, q->iobase + QUADSPI_TBDR);
 		txbuf++;
 	}
 
 	/* fill the TXFIFO upto 16 bytes for i.MX7d */
 	if (needs_fill_txfifo(q))
 		for (; i < 4; i++)
-			writel(tmp, q->iobase + QUADSPI_TBDR);
+			qspi_writel(q, tmp, q->iobase + QUADSPI_TBDR);
 
 	/* Trigger it */
 	ret = fsl_qspi_runcmd(q, opcode, to, count);
@@ -615,10 +649,10 @@ static void fsl_qspi_set_map_addr(struct fsl_qspi *q)
 	int nor_size = q->nor_size;
 	void __iomem *base = q->iobase;
 
-	writel(nor_size + q->memmap_phy, base + QUADSPI_SFA1AD);
-	writel(nor_size * 2 + q->memmap_phy, base + QUADSPI_SFA2AD);
-	writel(nor_size * 3 + q->memmap_phy, base + QUADSPI_SFB1AD);
-	writel(nor_size * 4 + q->memmap_phy, base + QUADSPI_SFB2AD);
+	qspi_writel(q, nor_size + q->memmap_phy, base + QUADSPI_SFA1AD);
+	qspi_writel(q, nor_size * 2 + q->memmap_phy, base + QUADSPI_SFA2AD);
+	qspi_writel(q, nor_size * 3 + q->memmap_phy, base + QUADSPI_SFB1AD);
+	qspi_writel(q, nor_size * 4 + q->memmap_phy, base + QUADSPI_SFB2AD);
 }
 
 /*
@@ -640,24 +674,26 @@ static void fsl_qspi_init_abh_read(struct fsl_qspi *q)
 	int seqid;
 
 	/* AHB configuration for access buffer 0/1/2 .*/
-	writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR);
-	writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR);
-	writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR);
+	qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR);
+	qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR);
+	qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR);
 	/*
 	 * Set ADATSZ with the maximum AHB buffer size to improve the
 	 * read performance.
 	 */
-	writel(QUADSPI_BUF3CR_ALLMST_MASK | ((q->devtype_data->ahb_buf_size / 8)
-			<< QUADSPI_BUF3CR_ADATSZ_SHIFT), base + QUADSPI_BUF3CR);
+	qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK |
+			((q->devtype_data->ahb_buf_size / 8)
+			<< QUADSPI_BUF3CR_ADATSZ_SHIFT),
+			base + QUADSPI_BUF3CR);
 
 	/* We only use the buffer3 */
-	writel(0, base + QUADSPI_BUF0IND);
-	writel(0, base + QUADSPI_BUF1IND);
-	writel(0, base + QUADSPI_BUF2IND);
+	qspi_writel(q, 0, base + QUADSPI_BUF0IND);
+	qspi_writel(q, 0, base + QUADSPI_BUF1IND);
+	qspi_writel(q, 0, base + QUADSPI_BUF2IND);
 
 	/* Set the default lut sequence for AHB Read. */
 	seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode);
-	writel(seqid << QUADSPI_BFGENCR_SEQID_SHIFT,
+	qspi_writel(q, seqid << QUADSPI_BFGENCR_SEQID_SHIFT,
 		q->iobase + QUADSPI_BFGENCR);
 }
 
@@ -713,7 +749,7 @@ static int fsl_qspi_nor_setup(struct fsl_qspi *q)
 		return ret;
 
 	/* Reset the module */
-	writel(QUADSPI_MCR_SWRSTSD_MASK | QUADSPI_MCR_SWRSTHD_MASK,
+	qspi_writel(q, QUADSPI_MCR_SWRSTSD_MASK | QUADSPI_MCR_SWRSTHD_MASK,
 		base + QUADSPI_MCR);
 	udelay(1);
 
@@ -721,24 +757,24 @@ static int fsl_qspi_nor_setup(struct fsl_qspi *q)
 	fsl_qspi_init_lut(q);
 
 	/* Disable the module */
-	writel(QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK,
+	qspi_writel(q, QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK,
 			base + QUADSPI_MCR);
 
-	reg = readl(base + QUADSPI_SMPR);
-	writel(reg & ~(QUADSPI_SMPR_FSDLY_MASK
+	reg = qspi_readl(q, base + QUADSPI_SMPR);
+	qspi_writel(q, reg & ~(QUADSPI_SMPR_FSDLY_MASK
 			| QUADSPI_SMPR_FSPHS_MASK
 			| QUADSPI_SMPR_HSENA_MASK
 			| QUADSPI_SMPR_DDRSMP_MASK), base + QUADSPI_SMPR);
 
 	/* Enable the module */
-	writel(QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK,
+	qspi_writel(q, QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK,
 			base + QUADSPI_MCR);
 
 	/* clear all interrupt status */
-	writel(0xffffffff, q->iobase + QUADSPI_FR);
+	qspi_writel(q, 0xffffffff, q->iobase + QUADSPI_FR);
 
 	/* enable the interrupt */
-	writel(QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER);
+	qspi_writel(q, QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER);
 
 	return 0;
 }
@@ -954,6 +990,7 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 	if (IS_ERR(q->iobase))
 		return PTR_ERR(q->iobase);
 
+	q->big_endian = of_property_read_bool(np, "big-endian");
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 					"QuadSPI-memory");
 	if (!devm_request_mem_region(dev, res->start, resource_size(res),
@@ -1101,8 +1138,8 @@ static int fsl_qspi_remove(struct platform_device *pdev)
 	}
 
 	/* disable the hardware */
-	writel(QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR);
-	writel(0x0, q->iobase + QUADSPI_RSER);
+	qspi_writel(q, QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR);
+	qspi_writel(q, 0x0, q->iobase + QUADSPI_RSER);
 
 	mutex_destroy(&q->lock);
 
-- 
2.1.0.27.g96db324

[PATCH v4 4/7] Documentation: fsl-quadspi: Add fsl,ls2080a-dspi compatible string

From: Yuan Yao <hidden>
Date: 2016-01-26 07:32:37 

new compatible string: "fsl,ls2080a-qspi".

Signed-off-by: Yuan Yao <redacted>
Acked-by: Rob Herring <robh@kernel.org>
---
Changed in v4:
No changes.

Changed in v3:
Add the modifier for new compatible string like:
"fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi"

Changed in v2:
Update my email to [off-list ref]
---
 Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
index fa77f87..1ad0fe3 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -1,7 +1,10 @@
 ARM Freescale DSPI controller
 
 Required properties:
-- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", "fsl,ls2085a-dspi"
+- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi",
+		"fsl,ls2085a-dspi"
+		or
+		"fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi"
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain SPI controller interrupt
 - clocks: from common clock binding: handle to dspi clock.
-- 
2.1.0.27.g96db324

[PATCH v4 7/7] Documentation: fsl-quadspi: Add optional properties

From: Yuan Yao <hidden>
Date: 2016-01-26 07:32:46 

Add optional properties for QSPI:
big-endian
if the register is big endian on this platform.

Signed-off-by: Yuan Yao <redacted>
Acked-by: Rob Herring <robh@kernel.org>
---
Changed in v4:
No changes.

Changed in v3:
No changes.

Changed in v2:
Update my email to [off-list ref]
---
 Documentation/devicetree/bindings/mtd/fsl-quadspi.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
index 0df2f3a..0333ec8 100644
--- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
@@ -21,6 +21,7 @@ Optional properties:
 			      But if there are two NOR flashes connected to the
 			      bus, you should enable this property.
 			      (Please check the board's schematic.)
+  - big-endian : That means the IP register is big endian
 
 Example:
 
-- 
2.1.0.27.g96db324

[PATCH v4 2/7] mtd: spi-nor: fsl-quadspi: add support for ls1021a

From: Yuan Yao <hidden>
Date: 2016-01-26 07:33:13 

LS1021a also support Freescale Quad SPI controller.
Add fsl-quadspi support for ls1021a chip and make SPI_FSL_QUADSPI
selectable for LS1021A SOC hardwares.

Signed-off-by: Yuan Yao <redacted>
Acked-by: Han xu <redacted>
---
Changed in v4:
No changes.

Changed in v3:
No changes.

Changed in v2:
Update my email to [off-list ref]
---
 drivers/mtd/spi-nor/Kconfig       |  2 +-
 drivers/mtd/spi-nor/fsl-quadspi.c | 10 ++++++++++
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 0dc9275..a28c278 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -30,7 +30,7 @@ config MTD_SPI_NOR_USE_4K_SECTORS
 
 config SPI_FSL_QUADSPI
 	tristate "Freescale Quad SPI controller"
-	depends on ARCH_MXC || COMPILE_TEST
+	depends on ARCH_MXC || SOC_LS1021A || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
 	  This enables support for the Quad SPI controller in master mode.
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 04e8a93..9ab2b51 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -213,6 +213,7 @@ enum fsl_qspi_devtype {
 	FSL_QUADSPI_IMX6SX,
 	FSL_QUADSPI_IMX7D,
 	FSL_QUADSPI_IMX6UL,
+	FSL_QUADSPI_LS1021A,
 };
 
 struct fsl_qspi_devtype_data {
@@ -258,6 +259,14 @@ static struct fsl_qspi_devtype_data imx6ul_data = {
 		       | QUADSPI_QUIRK_4X_INT_CLK,
 };
 
+static struct fsl_qspi_devtype_data ls1021a_data = {
+	.devtype = FSL_QUADSPI_LS1021A,
+	.rxfifo = 128,
+	.txfifo = 64,
+	.ahb_buf_size = 1024,
+	.driver_data = 0,
+};
+
 #define FSL_QSPI_MAX_CHIP	4
 struct fsl_qspi {
 	struct spi_nor nor[FSL_QSPI_MAX_CHIP];
@@ -812,6 +821,7 @@ static const struct of_device_id fsl_qspi_dt_ids[] = {
 	{ .compatible = "fsl,imx6sx-qspi", .data = (void *)&imx6sx_data, },
 	{ .compatible = "fsl,imx7d-qspi", .data = (void *)&imx7d_data, },
 	{ .compatible = "fsl,imx6ul-qspi", .data = (void *)&imx6ul_data, },
+	{ .compatible = "fsl,ls1021a-qspi", .data = (void *)&ls1021a_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids);
-- 
2.1.0.27.g96db324

[PATCH v4 6/7] dts/ls2080a: update the DTS for QSPI and DSPI support

From: Yuan Yao <hidden>
Date: 2016-01-26 07:46:49 

Signed-off-by: Yuan Yao <redacted>
---
Changed in v4:
No changes.

Changed in v3:
No changes.

Changed in v2:
Update my email to [off-list ref]
---
 arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts | 9 ++++++++-
 arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi    | 4 ++--
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
index 4cb996d..e8801fa 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -178,7 +178,14 @@
 
 &qspi {
 	status = "okay";
-	qflash0: s25fl008k {
+	flash0: s25fl256s1 at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+	flash2: s25fl256s1 at 2 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p80";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 2b23d03..65e612a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -318,7 +318,7 @@
 
 		dspi: dspi at 2100000 {
 			status = "disabled";
-			compatible = "fsl,vf610-dspi";
+			compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2100000 0x0 0x10000>;
@@ -444,7 +444,7 @@
 
 		qspi: quadspi at 20c0000 {
 			status = "disabled";
-			compatible = "fsl,vf610-qspi";
+			compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x20c0000 0x0 0x10000>,
-- 
2.1.0.27.g96db324

[PATCH v4 5/7] Documentation: fsl-quadspi: Add fsl, ls2080a-qspi compatible string

From: Yuan Yao <hidden>
Date: 2016-01-26 07:48:15 

new compatible string: "fsl,ls2080a-qspi".

Signed-off-by: Yuan Yao <redacted>
Acked-by: Rob Herring <robh@kernel.org>
---
Changed in v4:
No changes.

Changed in v3:
Add the modifier for new compatible string like:
"fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi"

Changed in v2:
Update my email to [off-list ref]
---
 Documentation/devicetree/bindings/mtd/fsl-quadspi.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
index 00c587b..0df2f3a 100644
--- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
@@ -3,7 +3,9 @@
 Required properties:
   - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi",
 		 "fsl,imx7d-qspi", "fsl,imx6ul-qspi",
-		 "fsl,ls1021-qspi"
+		 "fsl,ls1021a-qspi"
+		 or
+		 "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi"
   - reg : the first contains the register location and length,
           the second contains the memory mapping address and length
   - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
-- 
2.1.0.27.g96db324

[PATCH v4 3/7] mtd: spi-nor: fsl-quadspi: add support for layerscape

From: Yuan Yao <hidden>
Date: 2016-01-26 07:48:30 

LS1043a and LS2080A in the Layerscape family also support Freescale Quad
SPI, make Quad SPI selectable for these hardwares.

Signed-off-by: Yuan Yao <redacted>
---
Changed in v4:
No changes.

Changed in v3:
No changes.

Changed in v2:
Update my email to [off-list ref]
---
 drivers/mtd/spi-nor/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index a28c278..6b53deb 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -30,7 +30,7 @@ config MTD_SPI_NOR_USE_4K_SECTORS
 
 config SPI_FSL_QUADSPI
 	tristate "Freescale Quad SPI controller"
-	depends on ARCH_MXC || SOC_LS1021A || COMPILE_TEST
+	depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
 	  This enables support for the Quad SPI controller in master mode.
-- 
2.1.0.27.g96db324

Re: [PATCH v4 1/7] mtd: spi-nor: fsl-quadspi: add big-endian support

From: Han Xu <hidden>
Date: 2016-02-17 17:17:15 

On Tue, Jan 26, 2016 at 03:23:55PM +0800, Yuan Yao wrote:
quoted hunk
Add R/W functions for big- or little-endian registers:
The qSPI controller's endian is independent of the CPU core's endian.
So far, the qSPI have two versions for big-endian and little-endian.

Signed-off-by: Yuan Yao <redacted>
Acked-by: Han xu <redacted>
---
Changed in v4:
No changes.

Changed in v3:
Update my email to [off-list ref]

Changed in v2:
Rebase to the lastest code.
---
 drivers/mtd/spi-nor/fsl-quadspi.c | 157 +++++++++++++++++++++++---------------
 1 file changed, 97 insertions(+), 60 deletions(-)

diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 54640f1..04e8a93 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -275,6 +275,7 @@ struct fsl_qspi {
 	u32 clk_rate;
 	unsigned int chip_base_addr; /* We may support two chips. */
 	bool has_second_chip;
+	bool big_endian;
 	struct mutex lock;
 	struct pm_qos_request pm_qos_req;
 };
@@ -300,6 +301,28 @@ static inline int needs_wakeup_wait_mode(struct fsl_qspi *q)
 }
 
 /*
+ * R/W functions for big- or little-endian registers:
+ * The qSPI controller's endian is independent of the CPU core's endian.
+ * So far, although the CPU core is little-endian but the qSPI have two
+ * versions for big-endian and little-endian.
+ */
+static void qspi_writel(struct fsl_qspi *q, u32 val, void __iomem *addr)
+{
+	if (q->big_endian)
+		iowrite32be(val, addr);
+	else
+		iowrite32(val, addr);
+}
+
+static u32 qspi_readl(struct fsl_qspi *q, void __iomem *addr)
+{
+	if (q->big_endian)
+		return ioread32be(addr);
+	else
+		return ioread32(addr);
+}
+
+/*
  * An IC bug makes us to re-arrange the 32-bit data.
  * The following chips, such as IMX6SLX, have fixed this bug.
  */
@@ -310,14 +333,14 @@ static inline u32 fsl_qspi_endian_xchg(struct fsl_qspi *q, u32 a)
 
 static inline void fsl_qspi_unlock_lut(struct fsl_qspi *q)
 {
-	writel(QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
-	writel(QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR);
+	qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
+	qspi_writel(q, QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR);
 }
 
 static inline void fsl_qspi_lock_lut(struct fsl_qspi *q)
 {
-	writel(QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
-	writel(QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR);
+	qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
+	qspi_writel(q, QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR);
 }
 
 static irqreturn_t fsl_qspi_irq_handler(int irq, void *dev_id)
@@ -326,8 +349,8 @@ static irqreturn_t fsl_qspi_irq_handler(int irq, void *dev_id)
 	u32 reg;
 
 	/* clear interrupt */
-	reg = readl(q->iobase + QUADSPI_FR);
-	writel(reg, q->iobase + QUADSPI_FR);
+	reg = qspi_readl(q, q->iobase + QUADSPI_FR);
+	qspi_writel(q, reg, q->iobase + QUADSPI_FR);
 
 	if (reg & QUADSPI_FR_TFF_MASK)
 		complete(&q->c);
@@ -348,7 +371,7 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
 
 	/* Clear all the LUT table */
 	for (i = 0; i < QUADSPI_LUT_NUM; i++)
-		writel(0, base + QUADSPI_LUT_BASE + i * 4);
+		qspi_writel(q, 0, base + QUADSPI_LUT_BASE + i * 4);
 
 	/* Quad Read */
 	lut_base = SEQID_QUAD_READ * 4;
@@ -364,14 +387,15 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
 		dummy = 8;
 	}
 
-	writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+	qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
 			base + QUADSPI_LUT(lut_base));
-	writel(LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo),
+	qspi_writel(q, LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo),
 			base + QUADSPI_LUT(lut_base + 1));
 
 	/* Write enable */
 	lut_base = SEQID_WREN * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_WREN), base + QUADSPI_LUT(lut_base));
+	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WREN),
+			base + QUADSPI_LUT(lut_base));
 
 	/* Page Program */
 	lut_base = SEQID_PP * 4;
@@ -385,13 +409,15 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
 		addrlen = ADDR32BIT;
 	}
 
-	writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+	qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
 			base + QUADSPI_LUT(lut_base));
-	writel(LUT0(FSL_WRITE, PAD1, 0), base + QUADSPI_LUT(lut_base + 1));
+	qspi_writel(q, LUT0(FSL_WRITE, PAD1, 0),
+			base + QUADSPI_LUT(lut_base + 1));
 
 	/* Read Status */
 	lut_base = SEQID_RDSR * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_RDSR) | LUT1(FSL_READ, PAD1, 0x1),
+	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDSR) |
+			LUT1(FSL_READ, PAD1, 0x1),
 			base + QUADSPI_LUT(lut_base));
 
 	/* Erase a sector */
@@ -400,40 +426,46 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
 	cmd = q->nor[0].erase_opcode;
 	addrlen = q->nor_size <= SZ_16M ? ADDR24BIT : ADDR32BIT;
 
-	writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+	qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
 			base + QUADSPI_LUT(lut_base));
 
 	/* Erase the whole chip */
 	lut_base = SEQID_CHIP_ERASE * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE),
+	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE),
 			base + QUADSPI_LUT(lut_base));
 
 	/* READ ID */
 	lut_base = SEQID_RDID * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_RDID) | LUT1(FSL_READ, PAD1, 0x8),
+	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDID) |
+			LUT1(FSL_READ, PAD1, 0x8),
 			base + QUADSPI_LUT(lut_base));
 
 	/* Write Register */
 	lut_base = SEQID_WRSR * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_WRSR) | LUT1(FSL_WRITE, PAD1, 0x2),
+	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WRSR) |
+			LUT1(FSL_WRITE, PAD1, 0x2),
 			base + QUADSPI_LUT(lut_base));
 
 	/* Read Configuration Register */
 	lut_base = SEQID_RDCR * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_RDCR) | LUT1(FSL_READ, PAD1, 0x1),
+	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDCR) |
+			LUT1(FSL_READ, PAD1, 0x1),
 			base + QUADSPI_LUT(lut_base));
 
 	/* Write disable */
 	lut_base = SEQID_WRDI * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_WRDI), base + QUADSPI_LUT(lut_base));
+	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WRDI),
+			base + QUADSPI_LUT(lut_base));
 
 	/* Enter 4 Byte Mode (Micron) */
 	lut_base = SEQID_EN4B * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_EN4B), base + QUADSPI_LUT(lut_base));
+	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_EN4B),
+			base + QUADSPI_LUT(lut_base));
 
 	/* Enter 4 Byte Mode (Spansion) */
 	lut_base = SEQID_BRWR * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_BRWR), base + QUADSPI_LUT(lut_base));
+	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_BRWR),
+			base + QUADSPI_LUT(lut_base));
 
 	fsl_qspi_lock_lut(q);
 }
@@ -488,15 +520,16 @@ fsl_qspi_runcmd(struct fsl_qspi *q, u8 cmd, unsigned int addr, int len)
 			q->chip_base_addr, addr, len, cmd);
 
 	/* save the reg */
-	reg = readl(base + QUADSPI_MCR);
+	reg = qspi_readl(q, base + QUADSPI_MCR);
 
-	writel(q->memmap_phy + q->chip_base_addr + addr, base + QUADSPI_SFAR);
-	writel(QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS,
+	qspi_writel(q, q->memmap_phy + q->chip_base_addr + addr,
+			base + QUADSPI_SFAR);
+	qspi_writel(q, QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS,
 			base + QUADSPI_RBCT);
-	writel(reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR);
+	qspi_writel(q, reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR);
 
 	do {
-		reg2 = readl(base + QUADSPI_SR);
+		reg2 = qspi_readl(q, base + QUADSPI_SR);
 		if (reg2 & (QUADSPI_SR_IP_ACC_MASK | QUADSPI_SR_AHB_ACC_MASK)) {
 			udelay(1);
 			dev_dbg(q->dev, "The controller is busy, 0x%x\n", reg2);
@@ -507,21 +540,22 @@ fsl_qspi_runcmd(struct fsl_qspi *q, u8 cmd, unsigned int addr, int len)
 
 	/* trigger the LUT now */
 	seqid = fsl_qspi_get_seqid(q, cmd);
-	writel((seqid << QUADSPI_IPCR_SEQID_SHIFT) | len, base + QUADSPI_IPCR);
+	qspi_writel(q, (seqid << QUADSPI_IPCR_SEQID_SHIFT) | len,
+			base + QUADSPI_IPCR);
 
 	/* Wait for the interrupt. */
 	if (!wait_for_completion_timeout(&q->c, msecs_to_jiffies(1000))) {
 		dev_err(q->dev,
 			"cmd 0x%.2x timeout, addr@%.8x, FR:0x%.8x, SR:0x%.8x\n",
-			cmd, addr, readl(base + QUADSPI_FR),
-			readl(base + QUADSPI_SR));
+			cmd, addr, qspi_readl(q, base + QUADSPI_FR),
+			qspi_readl(q, base + QUADSPI_SR));
 		err = -ETIMEDOUT;
 	} else {
 		err = 0;
 	}
 
 	/* restore the MCR */
-	writel(reg, base + QUADSPI_MCR);
+	qspi_writel(q, reg, base + QUADSPI_MCR);
 
 	return err;
 }
@@ -533,7 +567,7 @@ static void fsl_qspi_read_data(struct fsl_qspi *q, int len, u8 *rxbuf)
 	int i = 0;
 
 	while (len > 0) {
-		tmp = readl(q->iobase + QUADSPI_RBDR + i * 4);
+		tmp = qspi_readl(q, q->iobase + QUADSPI_RBDR + i * 4);
 		tmp = fsl_qspi_endian_xchg(q, tmp);
 		dev_dbg(q->dev, "chip addr:0x%.8x, rcv:0x%.8x\n",
 				q->chip_base_addr, tmp);
@@ -561,9 +595,9 @@ static inline void fsl_qspi_invalid(struct fsl_qspi *q)
 {
 	u32 reg;
 
-	reg = readl(q->iobase + QUADSPI_MCR);
+	reg = qspi_readl(q, q->iobase + QUADSPI_MCR);
 	reg |= QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK;
-	writel(reg, q->iobase + QUADSPI_MCR);
+	qspi_writel(q, reg, q->iobase + QUADSPI_MCR);
 
 	/*
 	 * The minimum delay : 1 AHB + 2 SFCK clocks.
@@ -572,7 +606,7 @@ static inline void fsl_qspi_invalid(struct fsl_qspi *q)
 	udelay(1);
 
 	reg &= ~(QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK);
-	writel(reg, q->iobase + QUADSPI_MCR);
+	qspi_writel(q, reg, q->iobase + QUADSPI_MCR);
 }
 
 static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor,
@@ -586,20 +620,20 @@ static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor,
 		q->chip_base_addr, to, count);
 
 	/* clear the TX FIFO. */
-	tmp = readl(q->iobase + QUADSPI_MCR);
-	writel(tmp | QUADSPI_MCR_CLR_TXF_MASK, q->iobase + QUADSPI_MCR);
+	tmp = qspi_readl(q, q->iobase + QUADSPI_MCR);
+	qspi_writel(q, tmp | QUADSPI_MCR_CLR_TXF_MASK, q->iobase + QUADSPI_MCR);
 
 	/* fill the TX data to the FIFO */
 	for (j = 0, i = ((count + 3) / 4); j < i; j++) {
 		tmp = fsl_qspi_endian_xchg(q, *txbuf);
-		writel(tmp, q->iobase + QUADSPI_TBDR);
+		qspi_writel(q, tmp, q->iobase + QUADSPI_TBDR);
 		txbuf++;
 	}
 
 	/* fill the TXFIFO upto 16 bytes for i.MX7d */
 	if (needs_fill_txfifo(q))
 		for (; i < 4; i++)
-			writel(tmp, q->iobase + QUADSPI_TBDR);
+			qspi_writel(q, tmp, q->iobase + QUADSPI_TBDR);
 
 	/* Trigger it */
 	ret = fsl_qspi_runcmd(q, opcode, to, count);
@@ -615,10 +649,10 @@ static void fsl_qspi_set_map_addr(struct fsl_qspi *q)
 	int nor_size = q->nor_size;
 	void __iomem *base = q->iobase;
 
-	writel(nor_size + q->memmap_phy, base + QUADSPI_SFA1AD);
-	writel(nor_size * 2 + q->memmap_phy, base + QUADSPI_SFA2AD);
-	writel(nor_size * 3 + q->memmap_phy, base + QUADSPI_SFB1AD);
-	writel(nor_size * 4 + q->memmap_phy, base + QUADSPI_SFB2AD);
+	qspi_writel(q, nor_size + q->memmap_phy, base + QUADSPI_SFA1AD);
+	qspi_writel(q, nor_size * 2 + q->memmap_phy, base + QUADSPI_SFA2AD);
+	qspi_writel(q, nor_size * 3 + q->memmap_phy, base + QUADSPI_SFB1AD);
+	qspi_writel(q, nor_size * 4 + q->memmap_phy, base + QUADSPI_SFB2AD);
 }
 
 /*
@@ -640,24 +674,26 @@ static void fsl_qspi_init_abh_read(struct fsl_qspi *q)
 	int seqid;
 
 	/* AHB configuration for access buffer 0/1/2 .*/
-	writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR);
-	writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR);
-	writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR);
+	qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR);
+	qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR);
+	qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR);
 	/*
 	 * Set ADATSZ with the maximum AHB buffer size to improve the
 	 * read performance.
 	 */
-	writel(QUADSPI_BUF3CR_ALLMST_MASK | ((q->devtype_data->ahb_buf_size / 8)
-			<< QUADSPI_BUF3CR_ADATSZ_SHIFT), base + QUADSPI_BUF3CR);
+	qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK |
+			((q->devtype_data->ahb_buf_size / 8)
+			<< QUADSPI_BUF3CR_ADATSZ_SHIFT),
+			base + QUADSPI_BUF3CR);
 
 	/* We only use the buffer3 */
-	writel(0, base + QUADSPI_BUF0IND);
-	writel(0, base + QUADSPI_BUF1IND);
-	writel(0, base + QUADSPI_BUF2IND);
+	qspi_writel(q, 0, base + QUADSPI_BUF0IND);
+	qspi_writel(q, 0, base + QUADSPI_BUF1IND);
+	qspi_writel(q, 0, base + QUADSPI_BUF2IND);
 
 	/* Set the default lut sequence for AHB Read. */
 	seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode);
-	writel(seqid << QUADSPI_BFGENCR_SEQID_SHIFT,
+	qspi_writel(q, seqid << QUADSPI_BFGENCR_SEQID_SHIFT,
 		q->iobase + QUADSPI_BFGENCR);
 }
 
@@ -713,7 +749,7 @@ static int fsl_qspi_nor_setup(struct fsl_qspi *q)
 		return ret;
 
 	/* Reset the module */
-	writel(QUADSPI_MCR_SWRSTSD_MASK | QUADSPI_MCR_SWRSTHD_MASK,
+	qspi_writel(q, QUADSPI_MCR_SWRSTSD_MASK | QUADSPI_MCR_SWRSTHD_MASK,
 		base + QUADSPI_MCR);
 	udelay(1);
 
@@ -721,24 +757,24 @@ static int fsl_qspi_nor_setup(struct fsl_qspi *q)
 	fsl_qspi_init_lut(q);
 
 	/* Disable the module */
-	writel(QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK,
+	qspi_writel(q, QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK,
 			base + QUADSPI_MCR);
 
-	reg = readl(base + QUADSPI_SMPR);
-	writel(reg & ~(QUADSPI_SMPR_FSDLY_MASK
+	reg = qspi_readl(q, base + QUADSPI_SMPR);
+	qspi_writel(q, reg & ~(QUADSPI_SMPR_FSDLY_MASK
 			| QUADSPI_SMPR_FSPHS_MASK
 			| QUADSPI_SMPR_HSENA_MASK
 			| QUADSPI_SMPR_DDRSMP_MASK), base + QUADSPI_SMPR);
 
 	/* Enable the module */
-	writel(QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK,
+	qspi_writel(q, QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK,
 			base + QUADSPI_MCR);
 
 	/* clear all interrupt status */
-	writel(0xffffffff, q->iobase + QUADSPI_FR);
+	qspi_writel(q, 0xffffffff, q->iobase + QUADSPI_FR);
 
 	/* enable the interrupt */
-	writel(QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER);
+	qspi_writel(q, QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER);
 
 	return 0;
 }
@@ -954,6 +990,7 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 	if (IS_ERR(q->iobase))
 		return PTR_ERR(q->iobase);
 
+	q->big_endian = of_property_read_bool(np, "big-endian");
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 					"QuadSPI-memory");
 	if (!devm_request_mem_region(dev, res->start, resource_size(res),
@@ -1101,8 +1138,8 @@ static int fsl_qspi_remove(struct platform_device *pdev)
 	}
 
 	/* disable the hardware */
-	writel(QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR);
-	writel(0x0, q->iobase + QUADSPI_RSER);
+	qspi_writel(q, QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR);
+	qspi_writel(q, 0x0, q->iobase + QUADSPI_RSER);
 
 	mutex_destroy(&q->lock);
 
-- 
2.1.0.27.g96db324

Acked-by: Han xu <han.xu@nxp.com>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v4 2/7] mtd: spi-nor: fsl-quadspi: add support for ls1021a

From: Han Xu <hidden>
Date: 2016-02-17 17:18:43 

On Tue, Jan 26, 2016 at 03:23:56PM +0800, Yuan Yao wrote:
quoted hunk
LS1021a also support Freescale Quad SPI controller.
Add fsl-quadspi support for ls1021a chip and make SPI_FSL_QUADSPI
selectable for LS1021A SOC hardwares.

Signed-off-by: Yuan Yao <redacted>
Acked-by: Han xu <redacted>
---
Changed in v4:
No changes.

Changed in v3:
No changes.

Changed in v2:
Update my email to [off-list ref]
---
 drivers/mtd/spi-nor/Kconfig       |  2 +-
 drivers/mtd/spi-nor/fsl-quadspi.c | 10 ++++++++++
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 0dc9275..a28c278 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -30,7 +30,7 @@ config MTD_SPI_NOR_USE_4K_SECTORS
 
 config SPI_FSL_QUADSPI
 	tristate "Freescale Quad SPI controller"
-	depends on ARCH_MXC || COMPILE_TEST
+	depends on ARCH_MXC || SOC_LS1021A || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
 	  This enables support for the Quad SPI controller in master mode.
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 04e8a93..9ab2b51 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -213,6 +213,7 @@ enum fsl_qspi_devtype {
 	FSL_QUADSPI_IMX6SX,
 	FSL_QUADSPI_IMX7D,
 	FSL_QUADSPI_IMX6UL,
+	FSL_QUADSPI_LS1021A,
 };
 
 struct fsl_qspi_devtype_data {
@@ -258,6 +259,14 @@ static struct fsl_qspi_devtype_data imx6ul_data = {
 		       | QUADSPI_QUIRK_4X_INT_CLK,
 };
 
+static struct fsl_qspi_devtype_data ls1021a_data = {
+	.devtype = FSL_QUADSPI_LS1021A,
+	.rxfifo = 128,
+	.txfifo = 64,
+	.ahb_buf_size = 1024,
+	.driver_data = 0,
+};
+
 #define FSL_QSPI_MAX_CHIP	4
 struct fsl_qspi {
 	struct spi_nor nor[FSL_QSPI_MAX_CHIP];
@@ -812,6 +821,7 @@ static const struct of_device_id fsl_qspi_dt_ids[] = {
 	{ .compatible = "fsl,imx6sx-qspi", .data = (void *)&imx6sx_data, },
 	{ .compatible = "fsl,imx7d-qspi", .data = (void *)&imx7d_data, },
 	{ .compatible = "fsl,imx6ul-qspi", .data = (void *)&imx6ul_data, },
+	{ .compatible = "fsl,ls1021a-qspi", .data = (void *)&ls1021a_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids);
-- 
2.1.0.27.g96db324
Acked-by: Han xu <han.xu@nxp.com>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v4 4/7] Documentation: fsl-quadspi: Add fsl, ls2080a-dspi compatible string

From: Han Xu <hidden>
Date: 2016-02-17 17:19:34 

On Tue, Jan 26, 2016 at 03:23:58PM +0800, Yuan Yao wrote:
quoted hunk
new compatible string: "fsl,ls2080a-qspi".

Signed-off-by: Yuan Yao <redacted>
Acked-by: Rob Herring <robh@kernel.org>
---
Changed in v4:
No changes.

Changed in v3:
Add the modifier for new compatible string like:
"fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi"

Changed in v2:
Update my email to [off-list ref]
---
 Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
index fa77f87..1ad0fe3 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -1,7 +1,10 @@
 ARM Freescale DSPI controller
 
 Required properties:
-- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", "fsl,ls2085a-dspi"
+- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi",
+		"fsl,ls2085a-dspi"
+		or
+		"fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi"
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain SPI controller interrupt
 - clocks: from common clock binding: handle to dspi clock.
-- 
2.1.0.27.g96db324

Acked-by: Han xu <han.xu@nxp.com>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v4 3/7] mtd: spi-nor: fsl-quadspi: add support for layerscape

From: Han Xu <hidden>
Date: 2016-02-17 17:19:54 

On Tue, Jan 26, 2016 at 03:23:57PM +0800, Yuan Yao wrote:
quoted hunk
LS1043a and LS2080A in the Layerscape family also support Freescale Quad
SPI, make Quad SPI selectable for these hardwares.

Signed-off-by: Yuan Yao <redacted>
---
Changed in v4:
No changes.

Changed in v3:
No changes.

Changed in v2:
Update my email to [off-list ref]
---
 drivers/mtd/spi-nor/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index a28c278..6b53deb 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -30,7 +30,7 @@ config MTD_SPI_NOR_USE_4K_SECTORS
 
 config SPI_FSL_QUADSPI
 	tristate "Freescale Quad SPI controller"
-	depends on ARCH_MXC || SOC_LS1021A || COMPILE_TEST
+	depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
 	  This enables support for the Quad SPI controller in master mode.
-- 
2.1.0.27.g96db324

Acked-by: Han xu <han.xu@nxp.com>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v4 5/7] Documentation: fsl-quadspi: Add fsl, ls2080a-qspi compatible string

From: Han Xu <hidden>
Date: 2016-02-17 17:20:08 

On Tue, Jan 26, 2016 at 03:23:59PM +0800, Yuan Yao wrote:
quoted hunk
new compatible string: "fsl,ls2080a-qspi".

Signed-off-by: Yuan Yao <redacted>
Acked-by: Rob Herring <robh@kernel.org>
---
Changed in v4:
No changes.

Changed in v3:
Add the modifier for new compatible string like:
"fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi"

Changed in v2:
Update my email to [off-list ref]
---
 Documentation/devicetree/bindings/mtd/fsl-quadspi.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
index 00c587b..0df2f3a 100644
--- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
@@ -3,7 +3,9 @@
 Required properties:
   - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi",
 		 "fsl,imx7d-qspi", "fsl,imx6ul-qspi",
-		 "fsl,ls1021-qspi"
+		 "fsl,ls1021a-qspi"
+		 or
+		 "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi"
   - reg : the first contains the register location and length,
           the second contains the memory mapping address and length
   - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
-- 
2.1.0.27.g96db324

Acked-by: Han xu <han.xu@nxp.com>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v4 6/7] dts/ls2080a: update the DTS for QSPI and DSPI support

From: Han Xu <hidden>
Date: 2016-02-17 17:20:35 

On Tue, Jan 26, 2016 at 03:24:00PM +0800, Yuan Yao wrote:
quoted hunk
Signed-off-by: Yuan Yao <redacted>
---
Changed in v4:
No changes.

Changed in v3:
No changes.

Changed in v2:
Update my email to [off-list ref]
---
 arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts | 9 ++++++++-
 arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi    | 4 ++--
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
index 4cb996d..e8801fa 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -178,7 +178,14 @@
 
 &qspi {
 	status = "okay";
-	qflash0: s25fl008k {
+	flash0: s25fl256s1 at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+	flash2: s25fl256s1 at 2 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p80";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 2b23d03..65e612a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -318,7 +318,7 @@
 
 		dspi: dspi at 2100000 {
 			status = "disabled";
-			compatible = "fsl,vf610-dspi";
+			compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2100000 0x0 0x10000>;
@@ -444,7 +444,7 @@
 
 		qspi: quadspi at 20c0000 {
 			status = "disabled";
-			compatible = "fsl,vf610-qspi";
+			compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x20c0000 0x0 0x10000>,
-- 
2.1.0.27.g96db324

Acked-by: Han xu <han.xu@nxp.com>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v4 7/7] Documentation: fsl-quadspi: Add optional properties

From: Han Xu <hidden>
Date: 2016-02-17 17:20:59 

On Tue, Jan 26, 2016 at 03:24:01PM +0800, Yuan Yao wrote:
quoted hunk
Add optional properties for QSPI:
big-endian
if the register is big endian on this platform.

Signed-off-by: Yuan Yao <redacted>
Acked-by: Rob Herring <robh@kernel.org>
---
Changed in v4:
No changes.

Changed in v3:
No changes.

Changed in v2:
Update my email to [off-list ref]
---
 Documentation/devicetree/bindings/mtd/fsl-quadspi.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
index 0df2f3a..0333ec8 100644
--- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
@@ -21,6 +21,7 @@ Optional properties:
 			      But if there are two NOR flashes connected to the
 			      bus, you should enable this property.
 			      (Please check the board's schematic.)
+  - big-endian : That means the IP register is big endian
 
 Example:
 
-- 
2.1.0.27.g96db324

Acked-by: Han xu <han.xu@nxp.com>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v4 4/7] Documentation: fsl-quadspi: Add fsl,ls2080a-dspi compatible string

From: Brian Norris <computersforpeace@gmail.com>
Date: 2016-03-07 20:32:18 

On Tue, Jan 26, 2016 at 03:23:58PM +0800, Yuan Yao wrote:
new compatible string: "fsl,ls2080a-qspi".
^^ This line doesn't match the subject or the content of the patch.

Signed-off-by: Yuan Yao <redacted>
Acked-by: Rob Herring <robh@kernel.org>
---
Changed in v4:
No changes.

Changed in v3:
Add the modifier for new compatible string like:
"fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi"

Changed in v2:
Update my email to [off-list ref]
---
 Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt | 5 ++++-
^^ What is this change doing in this series anyway? You're touching MTD
stuff, not SPI stuff, and this string doesn't get used in any driver. Is
this controller somehow related, or is it a separate IP block that
happens to be on some of the same SoCs?

Anyway, you should send this kind of stuff to the SPI list, not the MTD
one.

Regards,
Brian
quoted hunk
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
index fa77f87..1ad0fe3 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -1,7 +1,10 @@
 ARM Freescale DSPI controller
 
 Required properties:
-- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", "fsl,ls2085a-dspi"
+- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi",
+		"fsl,ls2085a-dspi"
+		or
+		"fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi"
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain SPI controller interrupt
 - clocks: from common clock binding: handle to dspi clock.
-- 
2.1.0.27.g96db324

Re: [PATCH v4 1/7] mtd: spi-nor: fsl-quadspi: add big-endian support

From: Brian Norris <computersforpeace@gmail.com>
Date: 2016-03-07 20:34:21 

On Tue, Jan 26, 2016 at 03:23:55PM +0800, Yuan Yao wrote:
Add R/W functions for big- or little-endian registers:
The qSPI controller's endian is independent of the CPU core's endian.
So far, the qSPI have two versions for big-endian and little-endian.

Signed-off-by: Yuan Yao <redacted>
Acked-by: Han xu <redacted>
Pushed patches 1, 2, 3, 5, and 7 to l2-mtd.git. Patch 4 seems unrelated,
and patch 6 should go through arm-soc.

Regards,
Brian

RE: [PATCH v4 4/7] Documentation: fsl-quadspi: Add fsl,ls2080a-dspi compatible string

From: Yao Yuan <hidden>
Date: 2016-03-08 04:36:51 

On Tue, Mar 08, 2016 at 4:32AM, Brian Norris wrote:
On Tue, Jan 26, 2016 at 03:23:58PM +0800, Yuan Yao wrote:
quoted
new compatible string: "fsl,ls2080a-qspi".
^^ This line doesn't match the subject or the content of the patch.
quoted
Signed-off-by: Yuan Yao <redacted>
Acked-by: Rob Herring <robh@kernel.org>
---
Changed in v4:
No changes.

Changed in v3:
Add the modifier for new compatible string like:
"fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi"

Changed in v2:
Update my email to [off-list ref]
---
 Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt | 5 ++++-
^^ What is this change doing in this series anyway? You're touching MTD stuff,
not SPI stuff, and this string doesn't get used in any driver. Is this controller
somehow related, or is it a separate IP block that happens to be on some of the
same SoCs?
Sorry for the wrong subject, this patch is used for add the SPI(DSPI) binging document.
It should be some mistake that I make the wrong subject and the commit message.

Anyway, you should send this kind of stuff to the SPI list, not the MTD one.
I will resend it to SPI list, thanks for your review.

Regards,
Brian
quoted
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
index fa77f87..1ad0fe3 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -1,7 +1,10 @@
 ARM Freescale DSPI controller

 Required properties:
-- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", "fsl,ls2085a-dspi"
+- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi",
+		"fsl,ls2085a-dspi"
+		or
+		"fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi"
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain SPI controller interrupt
 - clocks: from common clock binding: handle to dspi clock.
--
2.1.0.27.g96db324
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help