# \[PATCH 4/6\] ARM: shmobile: r8a7778 dtsi: Use "arm,pl390" for GIC - From: Simon Horman \ - Date: 2015-12-18 02:30:42 - List: linux-arm-kernel - Page: https://ratatoskr.run/linux-arm-kernel/2015/12/8726378 - Thread: https://ratatoskr.run/linux-arm-kernel/2015/12/8726392/t.md ```text From: Geert Uytterhoeven Replace the "arm,cortex-a9-gic" compatible value for the GIC by "arm,pl390", as the documentation states it is a PL390. This has been confirmed by reading the GICD_IIDR register, which reports 0x0000043b (PL390 = 0x00, ARM = 0x43b). This has no effect on runtime behavior, as currently the GIC driver treats both compatible values the same. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7778.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 4f8e07811746..757c6ff319df 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -61,7 +61,7 @@ }; gic: interrupt-controller at fe438000 { - compatible = "arm,cortex-a9-gic"; + compatible = "arm,pl390"; #interrupt-cells = <3>; interrupt-controller; reg = <0xfe438000 0x1000>, -- 2.1.4 ```