[PATCH] ARM: at91: fix pinctrl driver selection
From: Alexandre Belloni <hidden>
Date: 2015-12-04 17:24:44
From: Ludovic Desroches <redacted> Move the selection of the pinctrl driver to SoC family level since we have two pinctrl drivers. It is useless to select one which is not compatible with the SoC. [abelloni: fixed pm.c when only sama2d2 is selected] Signed-off-by: Ludovic Desroches <redacted> Acked-by: Nicolas Ferre <redacted> Signed-off-by: Alexandre Belloni <redacted> --- arch/arm/mach-at91/Kconfig | 6 +++++- arch/arm/mach-at91/pm.c | 7 ++++++- 2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 92673006e55c..28656c2b54a0 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig@@ -4,7 +4,6 @@ menuconfig ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select COMMON_CLK_AT91 select PINCTRL - select PINCTRL_AT91 select SOC_BUS if ARCH_AT91
@@ -17,6 +16,7 @@ config SOC_SAMA5D2 select HAVE_AT91_USB_CLK select HAVE_AT91_H32MX select HAVE_AT91_GENERATED_CLK + select PINCTRL_AT91PIO4 help Select this if ou are using one of Atmel's SAMA5D2 family SoC.
@@ -27,6 +27,7 @@ config SOC_SAMA5D3 select HAVE_AT91_UTMI select HAVE_AT91_SMD select HAVE_AT91_USB_CLK + select PINCTRL_AT91 help Select this if you are using one of Atmel's SAMA5D3 family SoC. This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36.
@@ -40,6 +41,7 @@ config SOC_SAMA5D4 select HAVE_AT91_SMD select HAVE_AT91_USB_CLK select HAVE_AT91_H32MX + select PINCTRL_AT91 help Select this if you are using one of Atmel's SAMA5D4 family SoC.
@@ -50,6 +52,7 @@ config SOC_AT91RM9200 select CPU_ARM920T select HAVE_AT91_USB_CLK select MIGHT_HAVE_PCI + select PINCTRL_AT91 select SOC_SAM_V4_V5 select SRAM if PM help
@@ -65,6 +68,7 @@ config SOC_AT91SAM9 select HAVE_AT91_UTMI select HAVE_FB_ATMEL select MEMORY + select PINCTRL_AT91 select SOC_SAM_V4_V5 select SRAM if PM help
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 80e277cfcc8b..01cbb17e6f6b 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c@@ -41,8 +41,10 @@ * implementation should be moved down into the pinctrl driver and get * called as part of the generic suspend/resume path. */ +#ifdef PINCTRL_AT91 extern void at91_pinctrl_gpio_suspend(void); extern void at91_pinctrl_gpio_resume(void); +#endif static struct { unsigned long uhp_udp_mask;
@@ -151,8 +153,9 @@ static void at91_pm_suspend(suspend_state_t state) static int at91_pm_enter(suspend_state_t state) { +#ifdef PINCTRL_AT91 at91_pinctrl_gpio_suspend(); - +#endif switch (state) { /* * Suspend-to-RAM is like STANDBY plus slow clock mode, so
@@ -192,7 +195,9 @@ static int at91_pm_enter(suspend_state_t state) error: target_state = PM_SUSPEND_ON; +#ifdef PINCTRL_AT91 at91_pinctrl_gpio_resume(); +#endif return 0; }
--
2.5.0