[PATCH v2 3/3] ARM: dts: enable GPIO-a for Broadcom NSP

Subsystems: the rest

STALE3868d

4 messages, 4 authors, 2016-02-11 · open the first message on its own page

[PATCH v2 3/3] ARM: dts: enable GPIO-a for Broadcom NSP

From: Yendapally Reddy Dhananjaya Reddy <hidden>
Date: 2015-12-04 17:12:49

This enables the GPIO-a support for Broadcom NSP SoC

Signed-off-by: Yendapally Reddy Dhananjaya Reddy <redacted>
---
 arch/arm/boot/dts/bcm-nsp.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 58aca27..148d79e 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -116,4 +116,16 @@
 			status = "disabled";
 		};
 	};
+
+	gpioa: gpio at 18000020 {
+		compatible = "brcm,nsp-gpio-a";
+		reg = <0x18000020 0x70>,
+		      <0x1803f1c4 0x1c>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		ngpios = <32>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-ranges = <&pinctrl 0 0 32>;
+	};
 };
-- 
2.1.0

Re: [PATCH v2 3/3] ARM: dts: enable GPIO-a for Broadcom NSP

From: Linus Walleij <hidden>
Date: 2015-12-10 17:46:17

On Fri, Dec 4, 2015 at 6:12 PM, Yendapally Reddy Dhananjaya Reddy
[off-list ref] wrote:
This enables the GPIO-a support for Broadcom NSP SoC

Signed-off-by: Yendapally Reddy Dhananjaya Reddy <redacted>
Acked-by: Linus Walleij <redacted>

Please merge this through the ARM SoC tree or BCM upstream tree,
however that works.

Yours,
Linus Walleij

Re: [PATCH v2 3/3] ARM: dts: enable GPIO-a for Broadcom NSP

From: Florian Fainelli <hidden>
Date: 2015-12-11 00:33:40

On 10/12/15 09:46, Linus Walleij wrote:
On Fri, Dec 4, 2015 at 6:12 PM, Yendapally Reddy Dhananjaya Reddy
[off-list ref] wrote:
quoted
This enables the GPIO-a support for Broadcom NSP SoC

Signed-off-by: Yendapally Reddy Dhananjaya Reddy <redacted>
Acked-by: Linus Walleij <redacted>

Please merge this through the ARM SoC tree or BCM upstream tree,
however that works.
The same way as any other ARM-based SoCs, so I will take this one. Thanks.
-- 
Florian

Re: [PATCH v2 3/3] ARM: dts: enable GPIO-a for Broadcom NSP

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2016-02-11 20:03:04

On 04/12/15 09:12, Yendapally Reddy Dhananjaya Reddy wrote:
This enables the GPIO-a support for Broadcom NSP SoC

Signed-off-by: Yendapally Reddy Dhananjaya Reddy <redacted>
Finally applied to devicetree/next, since there was a bit of
restructuring with the addition of the ranges, please verify the results
look correct here:

https://github.com/Broadcom/stblinux/commit/018e4feb7584971b3dbda6daa6a8fef310cafbcb
quoted hunk
---
 arch/arm/boot/dts/bcm-nsp.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 58aca27..148d79e 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -116,4 +116,16 @@
 			status = "disabled";
 		};
 	};
+
+	gpioa: gpio at 18000020 {
+		compatible = "brcm,nsp-gpio-a";
+		reg = <0x18000020 0x70>,
+		      <0x1803f1c4 0x1c>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		ngpios = <32>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-ranges = <&pinctrl 0 0 32>;
+	};
 };

-- 
Florian
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help