[PATCH v2] arm64: dts: fsl-ls2080a: Add serial aliases
flat view
DORMANTno replies
From: Scott Wood <hidden>
Date: 2015-09-15 23:54:32
Subsystem:
arm/freescale imx / mxc / layerscape arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
These will allow U-Boot to set linux,stdout-path in /chosen based on the active console device, which will allow devicetree-based earlycon. Signed-off-by: Scott Wood <redacted> --- v2: Put aliases in board dts rather than chip dtsi Depends on https://patchwork.kernel.org/patch/7120211/ arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts | 5 +++++ arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts | 5 +++++ arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts | 5 +++++ 3 files changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
index 116b7c2..437dd25 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts@@ -51,6 +51,11 @@ / { model = "Freescale Layerscape 2080a QDS Board"; compatible = "fsl,ls2080a-qds", "fsl,ls2080a"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; }; &esdhc {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
index 2858da7..6be14b5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts@@ -51,6 +51,11 @@ / { model = "Freescale Layerscape 2080a RDB Board"; compatible = "fsl,ls2080a-rdb", "fsl,ls2080a"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; }; &esdhc {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
index cf45d38..21a07a0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts@@ -57,6 +57,11 @@ model = "Freescale Layerscape 2080a software Simulator model"; compatible = "fsl,ls2080a-simu", "fsl,ls2080a"; + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; + ethernet at 2210000 { compatible = "smsc,lan91c111"; reg = <0x0 0x2210000 0x0 0x100>;
--
2.1.4