[PATCH 1/1] ASoC: dwc: fix dma stop transferring issue

Subsystems: sound, sound - soc layer / dynamic audio power management (asoc), the rest

STALE3961d

2 messages, 2 authors, 2015-09-28 · open the first message on its own page

[PATCH 1/1] ASoC: dwc: fix dma stop transferring issue

From: yitian <hidden>
Date: 2015-09-28 06:37:21

Designware I2S uses tx empty and rx available signals as the DMA
handshaking signals. during music playing, if XRUN occurs,
i2s_stop() function will be executed and both tx and rx irq are
masked, when music contintes to be played, i2s_start() is executed
but both tx and rx irq are not unmasked which cause I2S stop
sending DMA handshaking signal to DMA controller, and it finally
cause music playing will be stopped once XRUN occurs for the first
time.

Signed-off-by: Yitian Bu <redacted>
---
 sound/soc/dwc/designware_i2s.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
index a3e97b4..4d3e1d3 100644
--- a/sound/soc/dwc/designware_i2s.c
+++ b/sound/soc/dwc/designware_i2s.c
@@ -144,10 +144,19 @@ static void i2s_start(struct dw_i2s_dev *dev,
 
 	i2s_write_reg(dev->i2s_base, IER, 1);
 
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		for (i = 0; i < 4; i++) {
+			irq = i2s_read_reg(dev->i2s_base, IMR(i));
+			i2s_write_reg(dev->i2s_base, IMR(i), irq & ~0x30);
+		}
 		i2s_write_reg(dev->i2s_base, ITER, 1);
-	else
+	} else {
+		for (i = 0; i < 4; i++) {
+			irq = i2s_read_reg(dev->i2s_base, IMR(i));
+			i2s_write_reg(dev->i2s_base, IMR(i), irq & ~0x03);
+		}
 		i2s_write_reg(dev->i2s_base, IRER, 1);
+	}
 
 	i2s_write_reg(dev->i2s_base, CER, 1);
 }
-- 
1.7.12.4

Re: [PATCH 1/1] ASoC: dwc: fix dma stop transferring issue

From: kbuild test robot <hidden>
Date: 2015-09-28 08:50:50

Hi yitian,

[auto build test results on v4.3-rc3 -- if it's inappropriate base, please ignore]

config: i386-randconfig-r0-201539 (attached as .config)
reproduce:
  git checkout 3488a5ee9b79e2ced9fa43b78c9c5d0aa7e052f9
  # save the attached .config to linux build tree
  make ARCH=i386 

All error/warnings (new ones prefixed by >>):

   sound/soc/dwc/designware_i2s.c: In function 'i2s_start':
quoted
sound/soc/dwc/designware_i2s.c:148:8: error: 'i' undeclared (first use in this function)
      for (i = 0; i < 4; i++) {
           ^
   sound/soc/dwc/designware_i2s.c:148:8: note: each undeclared identifier is reported only once for each function it appears in
quoted
sound/soc/dwc/designware_i2s.c:149:4: error: 'irq' undeclared (first use in this function)
       irq = i2s_read_reg(dev->i2s_base, IMR(i));
       ^

vim +/i +148 sound/soc/dwc/designware_i2s.c

   142			      struct snd_pcm_substream *substream)
   143	{
   144	
   145		i2s_write_reg(dev->i2s_base, IER, 1);
   146	
   147		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 > 148			for (i = 0; i < 4; i++) {
 > 149				irq = i2s_read_reg(dev->i2s_base, IMR(i));
   150				i2s_write_reg(dev->i2s_base, IMR(i), irq & ~0x30);
   151			}
   152			i2s_write_reg(dev->i2s_base, ITER, 1);

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/octet-stream
Size: 24380 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150928/887c1234/attachment-0001.obj>
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help