[PATCH 0/4] Qualcomm Switch-Mode Battery Charger and Boost

This series adds bindings and a device driver for the Qualcomm Switch-Mode
Battery Charger and Boost block found in pm8941.

Bjorn Andersson (4):
  spmi: pmic-arb: add irq_get_irqchip_state implementation
  dt-binding: power: Add Qualcomm SMBB binding
  power: Add Qualcomm SMBB driver
  ARM: dts: qcom-pm8941: Add charger node

 .../devicetree/bindings/power_supply/qcom_smbb.txt | 137 +++
 arch/arm/boot/dts/qcom-pm8941.dtsi                 |  21 +
 drivers/power/Kconfig                              |  12 +
 drivers/power/Makefile                             |   1 +
 drivers/power/qcom_smbb.c                          | 952 +++++++++++++++++++++
 drivers/spmi/spmi-pmic-arb.c                       |  17 +
 6 files changed, 1140 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power_supply/qcom_smbb.txt
 create mode 100644 drivers/power/qcom_smbb.c

-- 
1.8.2.2

Signed-off-by: Bjorn Andersson <redacted>
---
 arch/arm/boot/dts/qcom-pm8941.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index aa774e685018..6063c7ddda0f 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi

@@ -26,6 +26,27 @@
 			bias-pull-up;
 		};
 
+		charger at 1000 {
+			compatible = "qcom,pm8941-charger";
+			reg = <0x1000 0x700>;
+			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "chg-done",
+					  "chg-fast",
+					  "chg-trkl",
+					  "bat-temp-ok",
+					  "bat-present",
+					  "chg-gone",
+					  "usb-valid",
+					  "dc-valid";
+		};
+
 		pm8941_gpios: gpios at c000 {
 			compatible = "qcom,pm8941-gpio";
 			reg = <0xc000 0x2400>;

-- 
1.8.2.2