On Tue, Mar 31, 2015 at 07:50:58PM +0800, Eddie Huang wrote:

Hi Sascha,

On Tue, 2015-03-31 at 15:08 +0800, Eddie Huang wrote:

quoted

Hi Sascha,

quoted

quoted

quoted

speed <= 400000 here to make this more obvious?

There are two cases, not only speed<=400000, but I2C_MASTER_WRRD. I tend
to keep it.

Still it looks strange. You only ever write this default value to the
register. Putting this register write under an if() seems bogus since
the same value will be in the register the next time this code is
executed. It looks like you should move this register write to some
initialization function.

OK, move to mtk_i2c_init_hw function

Sorry for my negligence. Write-then-read (I2C_MASTER_WRRD) decides
according to each I2C transfer, so I still need to judge whether set
I2C_CONTROL_RS and DELAY_LEN here. Other control setting can move to
init function.

You need to decide whether you have to set the I2C_CONTROL_RS bit, but
you don't need to write the same value to the DELAY_LEN register each
time. It won't change under your hood.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |