[PATCH] ARM: efm32: switch to properly namespaced location property
From: Uwe Kleine-König <hidden>
Date: 2015-01-29 15:01:14
Subsystem:
the rest · Maintainer:
Linus Torvalds
Since commits: 281ec367bff4 (i2c: efm32: correct namespacing of location property) d36f47fa8419 (serial: efm32: correct namespacing of location property) 10ed7e9847b6 (spi: efm32: correct namespacing of location property) (contained in 3.17-rc1) all drivers support the correctly namespaced location property. So use the better names now. Signed-off-by: Uwe Kleine-K?nig <redacted> --- arch/arm/boot/dts/efm32gg-dk3750.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts
index b4031fa..504cf45 100644
--- a/arch/arm/boot/dts/efm32gg-dk3750.dts
+++ b/arch/arm/boot/dts/efm32gg-dk3750.dts@@ -26,7 +26,7 @@ }; i2c at 4000a000 { - efm32,location = <3>; + energymicro,location = <3>; status = "ok"; temp at 48 {
@@ -43,7 +43,7 @@ spi0: spi at 4000c000 { /* USART0 */ cs-gpios = <&gpio 68 1>; // E4 - location = <1>; + energymicro,location = <1>; status = "ok"; microsd at 0 {
@@ -57,7 +57,7 @@ spi1: spi at 4000c400 { /* USART1 */ cs-gpios = <&gpio 51 1>; // D3 - location = <1>; + energymicro,location = <1>; status = "ok"; ks8851 at 0 {
@@ -70,7 +70,7 @@ }; uart4: uart at 4000e400 { /* UART1 */ - location = <2>; + energymicro,location = <2>; status = "ok"; };
--
2.1.4