[PATCH v5 0/2] ARM: hip04: add GPIO support

STALE4311d

Revision v5 of 3 in this series.

3 messages, 1 author, 2014-12-24 · open the first message on its own page

[PATCH v5 0/2] ARM: hip04: add GPIO support

From: Zhou Wang <hidden>
Date: 2014-12-24 09:25:09 

This series add the support for the GPIOs of Hisilicon Soc hip04. Hip04 uses
synopsis' GPIO IP, and we use the dwapb GPIO driver here. This series add the
corresponding dts. The default value of ARCH_NR_GPIOS is used to find gpio
base here.

Change in v5:
- Base on v3.19-rc1
- Just use default value of ARCH_NR_GPIOS to find gpio base. Remove the new
  added patch(3/4) in v4.
Change in v4:
- Delete "default 128 if ARCH_HIP04" in arch/arm/Kconfig
- add a new patch to support find GPIO base number in increasing order
- add gpio-number-forward property in snps gpio binding doc
Change in v3:
- Move CONFIG_GPIO_DWAPB to hisi_defconfig
- Add CONFIG_GPIOLIB, CONFIG_GPIO_SYSFS in hisi_defconfig
Change in v2:
- Add select GPIO_DWAPB in arch/arm/mach-hisi/Kconfig

Link for v4:
- http://www.spinics.net/lists/arm-kernel/msg383883.html
Link for v3:
- http://www.spinics.net/lists/devicetree/msg60324.html

Zhou Wang (2):
  ARM: hip04: add GPIO configure in hisi_defconfig
  ARM: dts: hip04: add GPIO pieces

 arch/arm/boot/dts/hip04.dtsi    |   77 +++++++++++++++++++++++++++++++++++++++
 arch/arm/configs/hisi_defconfig |    1 +
 2 files changed, 78 insertions(+)

-- 
1.7.9.5

[PATCH v5 1/2] ARM: hip04: add GPIO configure in hisi_defconfig

From: Zhou Wang <hidden>
Date: 2014-12-24 09:25:19 

The GPIO controller of Hisilicon hip04 Soc uses the IP from Sysnopsis,
gpio-dwapb.c can be reused to support this GPIO controller. This patch
adds related configure item in hisi_defconfig.

Signed-off-by: Zhou Wang <redacted>
---
 arch/arm/configs/hisi_defconfig |    1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig
index 1125436..4a50862 100644
--- a/arch/arm/configs/hisi_defconfig
+++ b/arch/arm/configs/hisi_defconfig
@@ -50,6 +50,7 @@ CONFIG_GPIO_SYSFS=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_GPIO_DWAPB=y
 CONFIG_MFD_SYSCON=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_DRM=y
-- 
1.7.9.5

[PATCH v5 2/2] ARM: dts: hip04: add GPIO pieces

From: Zhou Wang <hidden>
Date: 2014-12-24 09:25:28 

Hisilicon Soc hip04 has four GPIO controllers, each one has 32
GPIOs and can be configured to be an interrupt controller.The GPIO
controllers are compatible with the snps,dw-apb-gpio driver.
This patch add the corresponding device tree nodes.

Signed-off-by: Zhou Wang <redacted>
---
 arch/arm/boot/dts/hip04.dtsi |   75 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)

diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index 2388145..267942a 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -269,6 +269,81 @@
 			interrupts = <0 372 4>;
 		};
 
+		gpio at 4003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x4003000 0x1000>;
+
+			gpio3: gpio-controller at 0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 392 4>;
+			};
+		};
+
+		gpio at 4002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x4002000 0x1000>;
+
+			gpio2: gpio-controller at 0 {
+			compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 391 4>;
+			};
+		};
+
+		gpio at 4001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x4001000 0x1000>;
+
+			gpio1: gpio-controller at 0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 390 4>;
+			};
+		};
+
+		gpio at 4000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x4000000 0x1000>;
+
+			gpio0: gpio-controller at 0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 389 4>;
+			};
+		};
 	};
 
 	etb at 0,e3c42000 {
-- 
1.7.9.5
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help