mxs_auart_modem_status() did't detect gpio's state change
because s->mctrl_prev was modified before by mctrl_gpio_get().
The patch introduces mctrl_temp variable to fix the bug.

Signed-off-by: Janusz Uzycki <redacted>
---

Two patches were missed during movements between our internal repos.
The 1/2 patch is required against commits:
  f9e42397d79b ("serial: mxs-auart: add interrupts for modem control lines")
  36a262782b04 ("serial: mxs-auart: enable PPS support")
I've done build-test for the next only before.
I should have done hardware test also for the next, sorry.
Now it is tested for the next on real hardware too.

---
 drivers/tty/serial/mxs-auart.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 840c1f7..c556116 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c

@@ -798,6 +798,7 @@ static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
 {
 	u32 istat;
 	struct mxs_auart_port *s = context;
+	u32 mctrl_temp = s->mctrl_prev;
 	u32 stat = readl(s->port.membase + AUART_STAT);
 
 	istat = readl(s->port.membase + AUART_INTR);

@@ -817,7 +818,7 @@ static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
 	    irq == s->gpio_irq[UART_GPIO_DSR] ||
 	    irq == s->gpio_irq[UART_GPIO_RI])
 		mxs_auart_modem_status(s,
-				mctrl_gpio_get(s->gpios, &s->mctrl_prev));
+				mctrl_gpio_get(s->gpios, &mctrl_temp));
 
 	if (istat & AUART_INTR_CTSMIS) {
 		if (CTS_AT_AUART() && s->ms_irq_enabled)

-- 
1.7.11.3