[PATCH/RFC] ARM: shmobile: r8a7791: Add SDHI clock rate to device tree
From: Simon Horman <hidden>
Date: 2014-10-30 05:57:36
Also in:
linux-sh
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Shinobu Uehara <redacted> Signed-off-by: Shinobu Uehara <redacted> [simon: rebase] Signed-off-by: Simon Horman <redacted> --- Based on the renesas-devel-20141030-v3.18-rc2 branch of my renesas tree If this is useful I wonder if it is should be set in the koelsch and/or henniger board DTS file instead of the r8a7791 DTSI SoC file. arch/arm/boot/dts/r8a7791.dtsi | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 9a57215..62745b8 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi@@ -416,6 +416,7 @@ reg = <0 0xee100000 0 0x200>; interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI0>; + renesas,clk-rate = <195000000>; status = "disabled"; };
@@ -424,6 +425,7 @@ reg = <0 0xee140000 0 0x100>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI1>; + renesas,clk-rate = <97500000>; status = "disabled"; };
@@ -432,6 +434,7 @@ reg = <0 0xee160000 0 0x100>; interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI2>; + renesas,clk-rate = <97500000>; status = "disabled"; };
--
2.1.1