[PATCH v4 0/6] Add initial support for pinctrl on Exynos7

@@ -260,7 +260,7 @@ static int exynos_gpio_irq_map(struct irq_domain *h, unsigned int virq,
 	struct samsung_pin_bank *b = h->host_data;
 
 	irq_set_chip_data(virq, b);
-	irq_set_chip_and_handler(virq, &exynos_gpio_irq_chip.chip,
+	irq_set_chip_and_handler(virq, &b->irq_chip->chip,
 					handle_level_irq);
 	set_irq_flags(virq, IRQF_VALID);
 	return 0;

@@ -344,6 +344,8 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
 			ret = -ENOMEM;
 			goto err_domains;
 		}
+
+		bank->irq_chip = &exynos_gpio_irq_chip;
 	}
 
 	return 0;

@@ -445,9 +447,9 @@ static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
 
 	for (i = 0; i < eintd->nr_banks; ++i) {
 		struct samsung_pin_bank *b = eintd->banks[i];
-		pend = readl(d->virt_base + EXYNOS_WKUP_EPEND_OFFSET
+		pend = readl(d->virt_base + b->irq_chip->eint_pend
 				+ b->eint_offset);
-		mask = readl(d->virt_base + EXYNOS_WKUP_EMASK_OFFSET
+		mask = readl(d->virt_base + b->irq_chip->eint_mask
 				+ b->eint_offset);
 		exynos_irq_demux_eint(pend & ~mask, b->irq_domain);
 	}

@@ -458,7 +460,9 @@ static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
 static int exynos_wkup_irq_map(struct irq_domain *h, unsigned int virq,
 					irq_hw_number_t hw)
 {
-	irq_set_chip_and_handler(virq, &exynos_wkup_irq_chip.chip,
+	struct samsung_pin_bank *b = h->host_data;
+
+	irq_set_chip_and_handler(virq, &b->irq_chip->chip,
 					handle_level_irq);
 	irq_set_chip_data(virq, h->host_data);
 	set_irq_flags(virq, IRQF_VALID);

@@ -510,6 +514,8 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
 			return -ENXIO;
 		}
 
+		bank->irq_chip = &exynos_wkup_irq_chip;
+
 		if (!of_find_property(bank->of_node, "interrupts", NULL)) {
 			bank->eint_type = EINT_TYPE_WKUP_MUX;
 			++muxed_banks;

@@ -127,6 +127,7 @@ struct samsung_pin_bank_type {
  * @irq_domain: IRQ domain of the bank.
  * @gpio_chip: GPIO chip of the bank.
  * @grange: linux gpio pin range supported by this bank.
+ * @irq_chip: link to irq chip for external gpio and wakeup interrupts.
  * @slock: spinlock protecting bank registers
  * @pm_save: saved register values during suspend
  */

@@ -146,6 +147,7 @@ struct samsung_pin_bank {
 	struct irq_domain *irq_domain;
 	struct gpio_chip gpio_chip;
 	struct pinctrl_gpio_range grange;
+	struct exynos_irq_chip *irq_chip;
 	spinlock_t slock;
 
 	u32 pm_save[PINCFG_TYPE_NUM + 1]; /* +1 to handle double CON registers*/

@@ -254,7 +254,7 @@ static struct exynos_irq_chip exynos_gpio_irq_chip = {
 	.eint_pend = EXYNOS_GPIO_EPEND_OFFSET,
 };
 
-static int exynos_gpio_irq_map(struct irq_domain *h, unsigned int virq,
+static int exynos_eint_irq_map(struct irq_domain *h, unsigned int virq,
 					irq_hw_number_t hw)
 {
 	struct samsung_pin_bank *b = h->host_data;

@@ -267,10 +267,10 @@ static int exynos_gpio_irq_map(struct irq_domain *h, unsigned int virq,
 }
 
 /*
- * irq domain callbacks for external gpio interrupt controller.
+ * irq domain callbacks for external gpio and wakeup interrupt controllers.
  */
-static const struct irq_domain_ops exynos_gpio_irqd_ops = {
-	.map	= exynos_gpio_irq_map,
+static const struct irq_domain_ops exynos_eint_irqd_ops = {
+	.map	= exynos_eint_irq_map,
 	.xlate	= irq_domain_xlate_twocell,
 };
 

@@ -330,7 +330,7 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
 		if (bank->eint_type != EINT_TYPE_GPIO)
 			continue;
 		bank->irq_domain = irq_domain_add_linear(bank->of_node,
-				bank->nr_pins, &exynos_gpio_irqd_ops, bank);
+				bank->nr_pins, &exynos_eint_irqd_ops, bank);
 		if (!bank->irq_domain) {
 			dev_err(dev, "gpio irq domain add failed\n");
 			ret = -ENXIO;

@@ -457,26 +457,6 @@ static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
 	chained_irq_exit(chip, desc);
 }
 
-static int exynos_wkup_irq_map(struct irq_domain *h, unsigned int virq,
-					irq_hw_number_t hw)
-{
-	struct samsung_pin_bank *b = h->host_data;
-
-	irq_set_chip_and_handler(virq, &b->irq_chip->chip,
-					handle_level_irq);
-	irq_set_chip_data(virq, h->host_data);
-	set_irq_flags(virq, IRQF_VALID);
-	return 0;
-}
-
-/*
- * irq domain callbacks for external wakeup interrupt controller.
- */
-static const struct irq_domain_ops exynos_wkup_irqd_ops = {
-	.map	= exynos_wkup_irq_map,
-	.xlate	= irq_domain_xlate_twocell,
-};
-
 /*
  * exynos_eint_wkup_init() - setup handling of external wakeup interrupts.
  * @d: driver data of samsung pinctrl driver.

@@ -508,7 +488,7 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
 			continue;
 
 		bank->irq_domain = irq_domain_add_linear(bank->of_node,
-				bank->nr_pins, &exynos_wkup_irqd_ops, bank);
+				bank->nr_pins, &exynos_eint_irqd_ops, bank);
 		if (!bank->irq_domain) {
 			dev_err(dev, "wkup irq domain add failed\n");
 			return -ENXIO;

@@ -136,6 +136,8 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
        found on Samsung S3C64xx SoCs,
      - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
        found on Samsung Exynos4210 and S5PC110/S5PV210 SoCs.
+     - samsung,exynos7-wakeup-eint: represents wakeup interrupt controller
+       found on Samsung Exynos7 SoC.
    - interrupt-parent: phandle of the interrupt parent to which the external
      wakeup interrupts are forwarded to.
    - interrupts: interrupt used by multiplexed wakeup interrupts.

@@ -56,12 +56,6 @@ static struct samsung_pin_bank_type bank_type_alive = {
 	.reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
 };
 
-/* list of external wakeup controllers supported */
-static const struct of_device_id exynos_wkup_irq_ids[] = {
-	{ .compatible = "samsung,exynos4210-wakeup-eint", },
-	{ }
-};
-
 static void exynos_irq_mask(struct irq_data *irqd)
 {
 	struct irq_chip *chip = irq_data_get_irq_chip(irqd);

@@ -385,9 +379,9 @@ static int exynos_wkup_irq_set_wake(struct irq_data *irqd, unsigned int on)
 /*
  * irq_chip for wakeup interrupts
  */
-static struct exynos_irq_chip exynos_wkup_irq_chip = {
+static struct exynos_irq_chip exynos4210_wkup_irq_chip __initdata = {
 	.chip = {
-		.name = "exynos_wkup_irq_chip",
+		.name = "exynos4210_wkup_irq_chip",
 		.irq_unmask = exynos_irq_unmask,
 		.irq_mask = exynos_irq_mask,
 		.irq_ack = exynos_irq_ack,

@@ -401,6 +395,31 @@ static struct exynos_irq_chip exynos_wkup_irq_chip = {
 	.eint_pend = EXYNOS_WKUP_EPEND_OFFSET,
 };
 
+static struct exynos_irq_chip exynos7_wkup_irq_chip __initdata = {
+	.chip = {
+		.name = "exynos7_wkup_irq_chip",
+		.irq_unmask = exynos_irq_unmask,
+		.irq_mask = exynos_irq_mask,
+		.irq_ack = exynos_irq_ack,
+		.irq_set_type = exynos_irq_set_type,
+		.irq_set_wake = exynos_wkup_irq_set_wake,
+		.irq_request_resources = exynos_irq_request_resources,
+		.irq_release_resources = exynos_irq_release_resources,
+	},
+	.eint_con = EXYNOS7_WKUP_ECON_OFFSET,
+	.eint_mask = EXYNOS7_WKUP_EMASK_OFFSET,
+	.eint_pend = EXYNOS7_WKUP_EPEND_OFFSET,
+};
+
+/* list of external wakeup controllers supported */
+static const struct of_device_id exynos_wkup_irq_ids[] = {
+	{ .compatible = "samsung,exynos4210-wakeup-eint",
+			.data = &exynos4210_wkup_irq_chip },
+	{ .compatible = "samsung,exynos7-wakeup-eint",
+			.data = &exynos7_wkup_irq_chip },
+	{ }
+};
+
 /* interrupt handler for wakeup interrupts 0..15 */
 static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
 {

@@ -469,12 +488,18 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
 	struct samsung_pin_bank *bank;
 	struct exynos_weint_data *weint_data;
 	struct exynos_muxed_weint_data *muxed_data;
+	struct exynos_irq_chip *irq_chip;
 	unsigned int muxed_banks = 0;
 	unsigned int i;
 	int idx, irq;
 
 	for_each_child_of_node(dev->of_node, np) {
-		if (of_match_node(exynos_wkup_irq_ids, np)) {
+		const struct of_device_id *match;
+
+		match = of_match_node(exynos_wkup_irq_ids, np);
+		if (match) {
+			irq_chip = kmemdup(match->data,
+				sizeof(*irq_chip), GFP_KERNEL);
 			wkup_np = np;
 			break;
 		}

@@ -494,7 +519,7 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
 			return -ENXIO;
 		}
 
-		bank->irq_chip = &exynos_wkup_irq_chip;
+		bank->irq_chip = irq_chip;
 
 		if (!of_find_property(bank->of_node, "interrupts", NULL)) {
 			bank->eint_type = EINT_TYPE_WKUP_MUX;

@@ -25,6 +25,9 @@
 #define EXYNOS_WKUP_ECON_OFFSET		0xE00
 #define EXYNOS_WKUP_EMASK_OFFSET	0xF00
 #define EXYNOS_WKUP_EPEND_OFFSET	0xF40
+#define EXYNOS7_WKUP_ECON_OFFSET	0x700
+#define EXYNOS7_WKUP_EMASK_OFFSET	0x900
+#define EXYNOS7_WKUP_EPEND_OFFSET	0xA00
 #define EXYNOS_SVC_OFFSET		0xB08
 #define EXYNOS_EINT_FUNC		0xF
 

@@ -18,6 +18,7 @@ Required Properties:
   - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
   - "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller.
   - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
+  - "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller.
 
 - reg: Base address of the pin controller hardware module and length of
   the address space it occupies.

@@ -1189,3 +1189,116 @@ struct samsung_pin_ctrl exynos5420_pin_ctrl[] = {
 		.label		= "exynos5420-gpio-ctrl4",
 	},
 };
+
+/* pin banks of exynos7 pin-controller - ALIVE */
+static struct samsung_pin_bank exynos7_pin_banks0[] = {
+	EXYNOS_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
+	EXYNOS_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
+	EXYNOS_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
+	EXYNOS_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
+};
+
+/* pin banks of exynos7 pin-controller - BUS0 */
+static struct samsung_pin_bank exynos7_pin_banks1[] = {
+	EXYNOS_PIN_BANK_EINTG(5, 0x000, "gpb0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpc0", 0x04),
+	EXYNOS_PIN_BANK_EINTG(2, 0x040, "gpc1", 0x08),
+	EXYNOS_PIN_BANK_EINTG(6, 0x060, "gpc2", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpc3", 0x10),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0a0, "gpd0", 0x14),
+	EXYNOS_PIN_BANK_EINTG(6, 0x0c0, "gpd1", 0x18),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0e0, "gpd2", 0x1c),
+	EXYNOS_PIN_BANK_EINTG(5, 0x100, "gpd4", 0x20),
+	EXYNOS_PIN_BANK_EINTG(4, 0x120, "gpd5", 0x24),
+	EXYNOS_PIN_BANK_EINTG(6, 0x140, "gpd6", 0x28),
+	EXYNOS_PIN_BANK_EINTG(3, 0x160, "gpd7", 0x2c),
+	EXYNOS_PIN_BANK_EINTG(2, 0x180, "gpd8", 0x30),
+	EXYNOS_PIN_BANK_EINTG(2, 0x1a0, "gpg0", 0x34),
+	EXYNOS_PIN_BANK_EINTG(4, 0x1c0, "gpg3", 0x38),
+};
+
+/* pin banks of exynos7 pin-controller - NFC */
+static struct samsung_pin_bank exynos7_pin_banks2[] = {
+	EXYNOS_PIN_BANK_EINTG(3, 0x000, "gpj0", 0x00),
+};
+
+/* pin banks of exynos7 pin-controller - TOUCH */
+static struct samsung_pin_bank exynos7_pin_banks3[] = {
+	EXYNOS_PIN_BANK_EINTG(3, 0x000, "gpj1", 0x00),
+};
+
+/* pin banks of exynos7 pin-controller - FF */
+static struct samsung_pin_bank exynos7_pin_banks4[] = {
+	EXYNOS_PIN_BANK_EINTG(4, 0x000, "gpg4", 0x00),
+};
+
+/* pin banks of exynos7 pin-controller - ESE */
+static struct samsung_pin_bank exynos7_pin_banks5[] = {
+	EXYNOS_PIN_BANK_EINTG(5, 0x000, "gpv7", 0x00),
+};
+
+/* pin banks of exynos7 pin-controller - FSYS0 */
+static struct samsung_pin_bank exynos7_pin_banks6[] = {
+	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpr4", 0x00),
+};
+
+/* pin banks of exynos7 pin-controller - FSYS1 */
+static struct samsung_pin_bank exynos7_pin_banks7[] = {
+	EXYNOS_PIN_BANK_EINTG(4, 0x000, "gpr0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpr1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(5, 0x040, "gpr2", 0x08),
+	EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpr3", 0x0c),
+};
+
+struct samsung_pin_ctrl exynos7_pin_ctrl[] = {
+	{
+		/* pin-controller instance 0 Alive data */
+		.pin_banks	= exynos7_pin_banks0,
+		.nr_banks	= ARRAY_SIZE(exynos7_pin_banks0),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.eint_wkup_init = exynos_eint_wkup_init,
+		.label		= "exynos7-gpio-ctrl0",
+	}, {
+		/* pin-controller instance 1 BUS0 data */
+		.pin_banks	= exynos7_pin_banks1,
+		.nr_banks	= ARRAY_SIZE(exynos7_pin_banks1),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.label		= "exynos7-gpio-ctrl1",
+	}, {
+		/* pin-controller instance 2 NFC data */
+		.pin_banks	= exynos7_pin_banks2,
+		.nr_banks	= ARRAY_SIZE(exynos7_pin_banks2),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.label		= "exynos7-gpio-ctrl2",
+	}, {
+		/* pin-controller instance 3 TOUCH data */
+		.pin_banks	= exynos7_pin_banks3,
+		.nr_banks	= ARRAY_SIZE(exynos7_pin_banks3),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.label		= "exynos7-gpio-ctrl3",
+	}, {
+		/* pin-controller instance 4 FF data */
+		.pin_banks	= exynos7_pin_banks4,
+		.nr_banks	= ARRAY_SIZE(exynos7_pin_banks4),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.label		= "exynos7-gpio-ctrl4",
+	}, {
+		/* pin-controller instance 5 ESE data */
+		.pin_banks	= exynos7_pin_banks5,
+		.nr_banks	= ARRAY_SIZE(exynos7_pin_banks5),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.label		= "exynos7-gpio-ctrl5",
+	}, {
+		/* pin-controller instance 6 FSYS0 data */
+		.pin_banks	= exynos7_pin_banks6,
+		.nr_banks	= ARRAY_SIZE(exynos7_pin_banks6),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.label		= "exynos7-gpio-ctrl6",
+	}, {
+		/* pin-controller instance 7 FSYS1 data */
+		.pin_banks	= exynos7_pin_banks7,
+		.nr_banks	= ARRAY_SIZE(exynos7_pin_banks7),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.label		= "exynos7-gpio-ctrl7",
+	},
+};

@@ -1226,6 +1226,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
 		.data = (void *)exynos5420_pin_ctrl },
 	{ .compatible = "samsung,s5pv210-pinctrl",
 		.data = (void *)s5pv210_pin_ctrl },
+	{ .compatible = "samsung,exynos7-pinctrl",
+		.data = (void *)exynos7_pin_ctrl },
 #endif
 #ifdef CONFIG_PINCTRL_S3C64XX
 	{ .compatible = "samsung,s3c64xx-pinctrl",

@@ -244,6 +244,7 @@ extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos5250_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos5260_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos5420_pin_ctrl[];
+extern struct samsung_pin_ctrl exynos7_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c64xx_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c2412_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c2416_pin_ctrl[];

@@ -0,0 +1,560 @@
+/*
+ * Samsung's Exynos7 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos7 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+&pinctrl_alive {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa3: gpa3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_bus0 {
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd4: gpd4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd5: gpd5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd6: gpd6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd7: gpd7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd8: gpd8 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c10_bus: hs-i2c10-bus {
+		samsung,pins = "gpb0-1", "gpb0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c11_bus: hs-i2c11-bus {
+		samsung,pins = "gpb0-3", "gpb0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c2_bus: hs-i2c2-bus {
+		samsung,pins = "gpd0-3", "gpd0-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpd1-4", "gpd1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c3_bus: hs-i2c3-bus {
+		samsung,pins = "gpd1-3", "gpd1-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c0_bus: hs-i2c0-bus {
+		samsung,pins = "gpd2-1", "gpd2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c1_bus: hs-i2c1-bus {
+		samsung,pins = "gpd2-3", "gpd2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c9_bus: hs-i2c9-bus {
+		samsung,pins = "gpd2-7", "gpd2-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c8_bus: hs-i2c8-bus {
+		samsung,pins = "gpd5-3", "gpd5-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpd5-0", "gpd5-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c4_bus: hs-i2c4-bus {
+		samsung,pins = "gpg3-1", "gpg3-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c5_bus: hs-i2c5-bus {
+		samsung,pins = "gpg3-3", "gpg3-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_nfc {
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c6_bus: hs-i2c6-bus {
+		samsung,pins = "gpj0-1", "gpj0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_touch {
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c7_bus: hs-i2c7-bus {
+		samsung,pins = "gpj1-1", "gpj1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_ff {
+	gpg4: gpg4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi3_bus: spi3-bus {
+		samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_ese {
+	gpv7: gpv7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi4_bus: spi4-bus {
+		samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_fsys0 {
+	gpr4: gpr4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpr4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpr4-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpr4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+};
+
+&pinctrl_fsys1 {
+	gpr0: gpr0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr1: gpr1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr2: gpr2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr3: gpr3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpr0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_ds: sd0-ds {
+		samsung,pins = "gpr0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_qrdy: sd0-qrdy {
+		samsung,pins = "gpr0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpr1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpr2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpr2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
+	sd1_ds: sd1-ds {
+		samsung,pins = "gpr2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <6>;
+	};
+
+	sd1_qrdy: sd1-qrdy {
+		samsung,pins = "gpr2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <6>;
+	};
+
+	sd1_int: sd1-int {
+		samsung,pins = "gpr2-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <6>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpr3-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <2>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <2>;
+	};
+
+	sd1_bus8: sd1-bus-width8 {
+		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <2>;
+	};
+};