[PATCHv6 0/5] remove the sub-node and deprecated

9 messages, 3 authors, 2014-08-25 · open the first message on its own page

[PATCHv6 0/5] remove the sub-node and deprecated

From: Jaehoon Chung <jh80.chung@samsung.com>
Date: 2014-07-25 01:11:48 

Since used the mmc_of_parse(), didn't parse the sub-node.
So we can remove the sub-node, because almost SoC used the only one card per a host.
And supports-highspeed can be replaced to "cap-mmc/sd-highspeed" property.

Changelog V6:
	- Fixed Wrong bit control for host's quirks and rename.
	- Add "Acked-by" for each SoC maintainers.
Changelog V5:
	- Rebased on v3.16-rc4.
	- Add Acked-by.
Changelog V4:
	- Fix the checkpatch error.
Changelog V3:
	- Fix the wrong bus-width value.
	- Use the slot->host->quirks instead of brq->quirks.
	- Add tested-by and reviewd-by.
Changelog V2:
	- Add the "mmc: dw_mmc: replace "disable-wp" from slot's quirks to host's quirk"

Jaehoon Chung (5):
  mmc: dw_mmc: modify the dt-binding for removing slot-node and
    supports-highspeed
  ARM: dts: exynos: unuse the slot-node and deprecated the
    supports-highspeed for dw-mmc
  ARM: dts: socfpga: unuse the slot-node and deprecated the
    supports-highspeed for dw-mmc
  ARM: dts: rockchip: unuse the slot-node and deprecated the
    supports-highspeed for dw-mmc
  mmc: dw_mmc: replace "disable-wp" from slot's quirk to host's quirk

 .../devicetree/bindings/mmc/exynos-dw-mshc.txt     |   17 ++++---------
 .../devicetree/bindings/mmc/k3-dw-mshc.txt         |   12 ++++-----
 .../devicetree/bindings/mmc/synopsys-dw-mshc.txt   |   12 ++++-----
 arch/arm/boot/dts/exynos4412-odroidx.dts           |    8 ++----
 arch/arm/boot/dts/exynos4412-origen.dts            |    8 ++----
 arch/arm/boot/dts/exynos4412-trats2.dts            |    8 ++----
 arch/arm/boot/dts/exynos5250-arndale.dts           |   18 ++++----------
 arch/arm/boot/dts/exynos5250-cros-common.dtsi      |   26 ++++++--------------
 arch/arm/boot/dts/exynos5250-smdk5250.dts          |   18 ++++----------
 arch/arm/boot/dts/exynos5250-snow.dts              |    6 ++---
 arch/arm/boot/dts/exynos5260-xyref5260.dts         |   18 ++++----------
 arch/arm/boot/dts/exynos5410-smdk5410.dts          |   18 ++++----------
 arch/arm/boot/dts/exynos5420-arndale-octa.dts      |   16 +++---------
 arch/arm/boot/dts/exynos5420-peach-pit.dts         |   16 +++---------
 arch/arm/boot/dts/exynos5420-smdk5420.dts          |   16 +++---------
 arch/arm/boot/dts/exynos5800-peach-pi.dts          |   16 +++---------
 arch/arm/boot/dts/rk3066a-bqcurie2.dts             |   16 +++---------
 arch/arm/boot/dts/socfpga_arria5.dtsi              |    9 +++----
 arch/arm/boot/dts/socfpga_cyclone5.dtsi            |    9 +++----
 arch/arm/boot/dts/socfpga_vt.dts                   |    9 +++----
 drivers/mmc/host/dw_mmc.c                          |   12 ++++-----
 include/linux/mmc/dw_mmc.h                         |    6 ++---
 22 files changed, 86 insertions(+), 208 deletions(-)

-- 
1.7.9.5

[PATCHv6 1/5] mmc: dw_mmc: modify the dt-binding for removing slot-node and supports-highspeed

From: Jaehoon Chung <jh80.chung@samsung.com>
Date: 2014-07-25 01:11:49 

Almost Soc is used the slot per a host.
Don't use the slot-node and deprecated the "supports-highsped" property.
Instead, use the cap-mmc/sd-highspeed.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Tushar Behera <redacted>
Reviewed-by: Ulf Hansson <redacted>
Tested-by: Sachin Kamat <redacted>
Acked-by: Seungwon Jeon <redacted>
---
 .../devicetree/bindings/mmc/exynos-dw-mshc.txt     |   17 +++++------------
 .../devicetree/bindings/mmc/k3-dw-mshc.txt         |   12 +++++-------
 .../devicetree/bindings/mmc/synopsys-dw-mshc.txt   |   12 +++++-------
 3 files changed, 15 insertions(+), 26 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
index 532b1d4..9308325 100644
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -46,13 +46,14 @@ Required Properties:
       - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
         phase shift clocks should be 0.
 
-Required properties for a slot:
+Required properties for a slot (Deprecated - Recommend to use one slot per a host):
 
 * gpios: specifies a list of gpios used for command, clock and data bus. The
   first gpio is the command line and the second gpio is the clock line. The
   rest of the gpios (depending on the bus-width property) are the data lines in
   no particular order. The format of the gpio specifier depends on the gpio
   controller.
+ (Deprecated - Refer to Documentaion/devicetree/binding/pinctrl/samsung-pinctrl.txt)
 
 Example:
 
@@ -69,21 +70,13 @@ Example:
 
 	dwmmc0 at 12200000 {
 		num-slots = <1>;
-		supports-highspeed;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
 		broken-cd;
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <8>;
-			gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
-				<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
-				<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
-				<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
-				<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
-		};
+		bus-width = <8>;
 	};
diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
index e5bc49f..3b35449 100644
--- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
@@ -34,13 +34,11 @@ Example:
 		num-slots = <1>;
 		vmmc-supply = <&ldo12>;
 		fifo-depth = <0x100>;
-		supports-highspeed;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>;
-		slot at 0 {
-			reg = <0>;
-			bus-width = <4>;
-			disable-wp;
-			cd-gpios = <&gpio10 3 0>;
-		};
+		bus-width = <4>;
+		disable-wp;
+		cd-gpios = <&gpio10 3 0>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
 	};
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
index 2d4a725..346c609 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -67,7 +67,8 @@ Optional properties:
 * card-detect-delay: Delay in milli-seconds before detecting card after card
   insert event. The default value is 0.
 
-* supports-highspeed: Enables support for high speed cards (up to 50MHz)
+* supports-highspeed (DEPRECATED): Enables support for high speed cards (up to 50MHz)
+			   (use "cap-mmc-highspeed" or "cap-sd-highspeed" instead)
 
 * broken-cd: as documented in mmc core bindings.
 
@@ -98,14 +99,11 @@ board specific portions as listed below.
 		clock-frequency = <400000000>;
 		clock-freq-min-max = <400000 200000000>;
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		vmmc-supply = <&buck8>;
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
 	};
-- 
1.7.9.5

[PATCHv6 2/5] ARM: dts: exynos: unuse the slot-node and deprecated the supports-highspeed for dw-mmc

From: Jaehoon Chung <jh80.chung@samsung.com>
Date: 2014-07-25 01:11:50 

dw-mmc controller can support multiple slots.
But, there are no use-cases anywhere. So we don't need to support the
slot-node for dw-mmc controller.
And "supports-highspeed" property in dw-mmc is deprecated.
"supports-highspeed" property can be replaced to "cap-sd/mmc-highspeed".

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Tushar Behera <redacted>
Reviewed-by: Ulf Hansson <redacted>
Tested-by: Sachin Kamat <redacted>
Acked-by: Seungwon Jeon <redacted>
Acked-by: Kukjin Kim <redacted>
---
 arch/arm/boot/dts/exynos4412-odroidx.dts      |    8 ++------
 arch/arm/boot/dts/exynos4412-origen.dts       |    8 ++------
 arch/arm/boot/dts/exynos4412-trats2.dts       |    8 ++------
 arch/arm/boot/dts/exynos5250-arndale.dts      |   18 +++++------------
 arch/arm/boot/dts/exynos5250-cros-common.dtsi |   26 +++++++------------------
 arch/arm/boot/dts/exynos5250-smdk5250.dts     |   18 +++++------------
 arch/arm/boot/dts/exynos5250-snow.dts         |    6 ++----
 arch/arm/boot/dts/exynos5260-xyref5260.dts    |   18 +++++------------
 arch/arm/boot/dts/exynos5410-smdk5410.dts     |   18 +++++------------
 arch/arm/boot/dts/exynos5420-arndale-octa.dts |   16 ++++-----------
 arch/arm/boot/dts/exynos5420-peach-pit.dts    |   16 ++++-----------
 arch/arm/boot/dts/exynos5420-smdk5420.dts     |   16 ++++-----------
 arch/arm/boot/dts/exynos5800-peach-pi.dts     |   16 ++++-----------
 13 files changed, 51 insertions(+), 141 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 31db28a..778aec6 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -45,17 +45,13 @@
 		status = "okay";
 
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	regulator_p3v3 {
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index e925c9f..de15114 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -137,17 +137,13 @@
 		status = "okay";
 
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	codec at 13400000 {
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 7787844..65ab885 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -520,7 +520,6 @@
 
 	mmc at 12550000 {
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		non-removable;
 		card-detect-delay = <200>;
@@ -532,11 +531,8 @@
 		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 		pinctrl-names = "default";
 		status = "okay";
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	serial at 13800000 {
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index d0de1f5..42a3590 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -401,7 +401,6 @@
 	mmc_0: mmc at 12200000 {
 		status = "okay";
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
@@ -410,17 +409,13 @@
 		vmmc-supply = <&mmc_reg>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	mmc_2: mmc at 12220000 {
 		status = "okay";
 		num-slots = <1>;
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
@@ -428,12 +423,9 @@
 		vmmc-supply = <&mmc_reg>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <4>;
-			disable-wp;
-		};
+		bus-width = <4>;
+		disable-wp;
+		cap-sd-highspeed;
 	};
 
 	i2s0: i2s at 03830000 {
diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
index 89ac90f..af51361 100644
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
@@ -248,7 +248,6 @@
 
 	mmc at 12200000 {
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
@@ -256,44 +255,33 @@
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	mmc at 12220000 {
 		num-slots = <1>;
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <4>;
-			wp-gpios = <&gpc2 1 0>;
-		};
+		bus-width = <4>;
+		wp-gpios = <&gpc2 1 0>;
+		cap-sd-highspeed;
 	};
 
 	mmc at 12230000 {
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		/* See board-specific dts files for pin setup */
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <4>;
-		};
+		bus-width = <4>;
+		cap-sd-highspeed;
 	};
 
 	spi_1: spi at 12d30000 {
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index a794a70..e00ffc6 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -282,7 +282,6 @@
 	mmc at 12200000 {
 		status = "okay";
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
@@ -290,29 +289,22 @@
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	mmc at 12220000 {
 		status = "okay";
 		num-slots = <1>;
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <4>;
-			disable-wp;
-		};
+		bus-width = <4>;
+		disable-wp;
+		cap-sd-highspeed;
 	};
 
 	spi_1: spi at 12d30000 {
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 079fdf9..17d8f53 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -329,10 +329,8 @@
 	 */
 	mmc at 12230000 {
 		status = "okay";
-		slot at 0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
-		};
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
 	};
 
 	i2c at 12CD0000 {
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
index 8c84ab2..a803b60 100644
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -69,7 +69,7 @@
 	num-slots = <1>;
 	broken-cd;
 	bypass-smu;
-	supports-highspeed;
+	cap-mmc-highspeed;
 	supports-hs200-mode; /* 200 Mhz */
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
@@ -77,27 +77,19 @@
 	samsung,dw-mshc-ddr-timing = <0 2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-
-	slot at 0 {
-		reg = <0>;
-		bus-width = <8>;
-	};
+	bus-width = <8>;
 };
 
 &mmc_2 {
 	status = "okay";
 	num-slots = <1>;
-	supports-highspeed;
+	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-
-	slot at 0 {
-		reg = <0>;
-		bus-width = <4>;
-		disable-wp;
-	};
+	bus-width = <4>;
+	disable-wp;
 };
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 7275bbd..be3e025 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -40,33 +40,25 @@
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
-	supports-highspeed;
+	cap-mmc-highspeed;
 	broken-cd;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
-
-	slot at 0 {
-		reg = <0>;
-		bus-width = <8>;
-	};
+	bus-width = <8>;
 };
 
 &mmc_2 {
 	status = "okay";
 	num-slots = <1>;
-	supports-highspeed;
+	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
-
-	slot at 0 {
-		reg = <0>;
-		bus-width = <4>;
-		disable-wp;
-	};
+	bus-width = <4>;
+	disable-wp;
 };
 
 &uart0 {
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 434fd9d..29dd71b 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -50,7 +50,6 @@
 	mmc at 12200000 {
 		status = "okay";
 		broken-cd;
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <0 4>;
@@ -58,16 +57,12 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
 		vmmc-supply = <&ldo10_reg>;
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	mmc at 12220000 {
 		status = "okay";
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
@@ -75,11 +70,8 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 		vmmc-supply = <&ldo10_reg>;
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <4>;
-		};
+		bus-width = <4>;
+		cap-mmc-highspeed;
 	};
 
 	hsi2c_4: i2c at 12CA0000 {
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 1c5b8f9..ca305d0 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -155,7 +155,7 @@
 	num-slots = <1>;
 	broken-cd;
 	caps2-mmc-hs200-1_8v;
-	supports-highspeed;
+	cap-mmc-highspeed;
 	non-removable;
 	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
@@ -164,17 +164,13 @@
 	samsung,dw-mshc-ddr-timing = <0 2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-	slot at 0 {
-		reg = <0>;
-		bus-width = <8>;
-	};
+	bus-width = <8>;
 };
 
 &mmc_2 {
 	status = "okay";
 	num-slots = <1>;
-	supports-highspeed;
+	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
 	samsung,dw-mshc-ciu-div = <3>;
@@ -182,11 +178,7 @@
 	samsung,dw-mshc-ddr-timing = <1 2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-	slot at 0 {
-		reg = <0>;
-		bus-width = <4>;
-	};
+	bus-width = <4>;
 };
 
 &hsi2c_7 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 6052aa9..8be3d7b 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -76,34 +76,26 @@
 	mmc at 12200000 {
 		status = "okay";
 		broken-cd;
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <0 4>;
 		samsung,dw-mshc-ddr-timing = <0 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	mmc at 12220000 {
 		status = "okay";
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <4>;
-		};
+		bus-width = <4>;
+		cap-sd-highspeed;
 	};
 
 	dp-controller at 145B0000 {
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index f3af207..d78ec38 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -139,7 +139,7 @@
 	num-slots = <1>;
 	broken-cd;
 	caps2-mmc-hs200-1_8v;
-	supports-highspeed;
+	cap-mmc-highspeed;
 	non-removable;
 	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
@@ -148,17 +148,13 @@
 	samsung,dw-mshc-ddr-timing = <0 2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-	slot at 0 {
-		reg = <0>;
-		bus-width = <8>;
-	};
+	bus-width = <8>;
 };
 
 &mmc_2 {
 	status = "okay";
 	num-slots = <1>;
-	supports-highspeed;
+	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
 	samsung,dw-mshc-ciu-div = <3>;
@@ -166,11 +162,7 @@
 	samsung,dw-mshc-ddr-timing = <1 2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-	slot at 0 {
-		reg = <0>;
-		bus-width = <4>;
-	};
+	bus-width = <4>;
 };
 
 &dp {
-- 
1.7.9.5

[PATCHv6 3/5] ARM: dts: socfpga: unuse the slot-node and deprecated the supports-highspeed for dw-mmc

From: Jaehoon Chung <jh80.chung@samsung.com>
Date: 2014-07-25 01:11:51 

dw-mmc controller can support multiple slots.
But, there are no use-cases anywhere. So we don't need to support the
slot-node for dw-mmc controller.
And "supports-highspeed" property in dw-mmc is deprecated.
"supports-highspeed" property can be replaced to "cap-sd/mmc-highspeed".

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Tushar Behera <redacted>
Reviewed-by: Ulf Hansson <redacted>
Acked-by: Seungwon Jeon <redacted>
Acked-by: Dinh Nguyen <redacted>
---
 arch/arm/boot/dts/socfpga_arria5.dtsi   |    9 +++------
 arch/arm/boot/dts/socfpga_cyclone5.dtsi |    9 +++------
 arch/arm/boot/dts/socfpga_vt.dts        |    9 +++------
 3 files changed, 9 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi
index 12d1c2c..468fc4c 100644
--- a/arch/arm/boot/dts/socfpga_arria5.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
@@ -29,13 +29,10 @@
 
 		dwmmc0 at ff704000 {
 			num-slots = <1>;
-			supports-highspeed;
 			broken-cd;
-
-			slot at 0 {
-				reg = <0>;
-				bus-width = <4>;
-			};
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
 		};
 
 		sysmgr at ffd08000 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
index bf51182..1ee03c4 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
@@ -30,13 +30,10 @@
 
 		dwmmc0 at ff704000 {
 			num-slots = <1>;
-			supports-highspeed;
 			broken-cd;
-
-			slot at 0 {
-				reg = <0>;
-				bus-width = <4>;
-			};
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
 		};
 
 		ethernet at ff702000 {
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts
index 09792b4..f9345e0 100644
--- a/arch/arm/boot/dts/socfpga_vt.dts
+++ b/arch/arm/boot/dts/socfpga_vt.dts
@@ -43,13 +43,10 @@
 
 		dwmmc0 at ff704000 {
 			num-slots = <1>;
-			supports-highspeed;
 			broken-cd;
-
-			slot at 0 {
-				reg = <0>;
-				bus-width = <4>;
-			};
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
 		};
 
 		ethernet at ff700000 {
-- 
1.7.9.5

[PATCHv6 4/5] ARM: dts: rockchip: unuse the slot-node and deprecated the supports-highspeed for dw-mmc

From: Jaehoon Chung <jh80.chung@samsung.com>
Date: 2014-07-25 01:11:52 

dw-mmc controller can support multiple slots.
But, there are no use-cases anywhere. So we don't need to support the
slot-node for dw-mmc controller.
And "supports-highspeed" property in dw-mmc is deprecated.
"supports-highspeed" property can be replaced to "cap-sd/mmc-highspeed".

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Tushar Behera <redacted>
Reviewed-by: Ulf Hansson <redacted>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Seungwon Jeon <redacted>
---
 arch/arm/boot/dts/rk3066a-bqcurie2.dts |   16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index afb3273..ecea889 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -59,12 +59,8 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
 			vmmc-supply = <&vcc_sd0>;
-
-			slot at 0 {
-				reg = <0>;
-				bus-width = <4>;
-				disable-wp;
-			};
+			bus-width = <4>;
+			disable-wp;
 		};
 
 		dwmmc at 10218000 { /* wifi */
@@ -74,12 +70,8 @@
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
-
-			slot at 0 {
-				reg = <0>;
-				bus-width = <4>;
-				disable-wp;
-			};
+			bus-width = <4>;
+			disable-wp;
 		};
 
 		gpio-keys {
-- 
1.7.9.5

[PATCHv6 5/5] mmc: dw_mmc: replace "disable-wp" from slot's quirk to host's quirk

From: Jaehoon Chung <jh80.chung@samsung.com>
Date: 2014-07-25 01:11:53 

Replaced the "disable-wp" into host's quirks.
(Because the slot-node is removed at dt-file.)

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Sachin Kamat <redacted>
Acked-by: Seungwon Jeon <redacted>
---
 drivers/mmc/host/dw_mmc.c  |   12 +++++-------
 include/linux/mmc/dw_mmc.h |    6 ++----
 2 files changed, 7 insertions(+), 11 deletions(-)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 1ac227c..4a4f66f 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -997,7 +997,7 @@ static int dw_mci_get_ro(struct mmc_host *mmc)
 	int gpio_ro = mmc_gpio_get_ro(mmc);
 
 	/* Use platform get_ro function, else try on board write protect */
-	if (slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT)
+	if (slot->host->quirks & DW_MCI_QUIRK_NO_WRITE_PROTECT)
 		read_only = 0;
 	else if (!IS_ERR_VALUE(gpio_ro))
 		read_only = gpio_ro;
@@ -2006,12 +2006,7 @@ static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
 static struct dw_mci_of_slot_quirks {
 	char *quirk;
 	int id;
-} of_slot_quirks[] = {
-	{
-		.quirk	= "disable-wp",
-		.id	= DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT,
-	},
-};
+} of_slot_quirks[] = {};
 
 static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
 {
@@ -2238,6 +2233,9 @@ static struct dw_mci_of_quirks {
 	{
 		.quirk	= "broken-cd",
 		.id	= DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
+	}, {
+		.quirk	= "disable-wp",
+		.id	= DW_MCI_QUIRK_NO_WRITE_PROTECT,
 	},
 };
 
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index babaea9..8b4b2d8 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -213,10 +213,8 @@ struct dw_mci_dma_ops {
 #define DW_MCI_QUIRK_HIGHSPEED			BIT(2)
 /* Unreliable card detection */
 #define DW_MCI_QUIRK_BROKEN_CARD_DETECTION	BIT(3)
-
-/* Slot level quirks */
-/* This slot has no write protect */
-#define DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT	BIT(0)
+/* No write protect */
+#define DW_MCI_QUIRK_NO_WRITE_PROTECT		BIT(4)
 
 struct dma_pdata;
 
-- 
1.7.9.5

Re: [PATCHv6 1/5] mmc: dw_mmc: modify the dt-binding for removing slot-node and supports-highspeed

From: Andreas Färber <afaerber@suse.de>
Date: 2014-07-25 12:11:52 

Hi Jaehoon,

Am 25.07.2014 03:11, schrieb Jaehoon Chung:
Almost Soc is used the slot per a host.
Something's very wrong with this sentence. What are you trying to say?
Almost all SoCs use one slot only per host controller device?

Don't use the slot-node and deprecated the "supports-highsped" property.
s/deprecated/deprecate/ ?
s/highsped/highspeed/
quoted hunk
Instead, use the cap-mmc/sd-highspeed.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Tushar Behera <redacted>
Reviewed-by: Ulf Hansson <redacted>
Tested-by: Sachin Kamat <redacted>
Acked-by: Seungwon Jeon <redacted>
---
 .../devicetree/bindings/mmc/exynos-dw-mshc.txt     |   17 +++++------------
 .../devicetree/bindings/mmc/k3-dw-mshc.txt         |   12 +++++-------
 .../devicetree/bindings/mmc/synopsys-dw-mshc.txt   |   12 +++++-------
 3 files changed, 15 insertions(+), 26 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
index 532b1d4..9308325 100644
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -46,13 +46,14 @@ Required Properties:
       - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
         phase shift clocks should be 0.
 
-Required properties for a slot:
+Required properties for a slot (Deprecated - Recommend to use one slot per a host):
"per host"

 
 * gpios: specifies a list of gpios used for command, clock and data bus. The
   first gpio is the command line and the second gpio is the clock line. The
   rest of the gpios (depending on the bus-width property) are the data lines in
   no particular order. The format of the gpio specifier depends on the gpio
   controller.
+ (Deprecated - Refer to Documentaion/devicetree/binding/pinctrl/samsung-pinctrl.txt)
"Documentation/"

Nit: Is the indentation intentional? (parenthesis not aligned with text)
quoted hunk
 
 Example:
 
@@ -69,21 +70,13 @@ Example:
 
 	dwmmc0 at 12200000 {
 		num-slots = <1>;
-		supports-highspeed;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
 		broken-cd;
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <8>;
-			gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
-				<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
-				<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
-				<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
-				<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
-		};
+		bus-width = <8>;
 	};
diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
index e5bc49f..3b35449 100644
--- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
@@ -34,13 +34,11 @@ Example:
 		num-slots = <1>;
 		vmmc-supply = <&ldo12>;
 		fifo-depth = <0x100>;
-		supports-highspeed;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>;
-		slot at 0 {
-			reg = <0>;
-			bus-width = <4>;
-			disable-wp;
-			cd-gpios = <&gpio10 3 0>;
-		};
+		bus-width = <4>;
+		disable-wp;
+		cd-gpios = <&gpio10 3 0>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
 	};
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
index 2d4a725..346c609 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -67,7 +67,8 @@ Optional properties:
 * card-detect-delay: Delay in milli-seconds before detecting card after card
   insert event. The default value is 0.
 
-* supports-highspeed: Enables support for high speed cards (up to 50MHz)
+* supports-highspeed (DEPRECATED): Enables support for high speed cards (up to 50MHz)
+			   (use "cap-mmc-highspeed" or "cap-sd-highspeed" instead)
 
 * broken-cd: as documented in mmc core bindings.
 
@@ -98,14 +99,11 @@ board specific portions as listed below.
 		clock-frequency = <400000000>;
 		clock-freq-min-max = <400000 200000000>;
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		vmmc-supply = <&buck8>;
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
 	};
Regards,
Andreas

-- 
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg

Re: [PATCHv6 1/5] mmc: dw_mmc: modify the dt-binding for removing slot-node and supports-highspeed

From: Jaehoon Chung <jh80.chung@samsung.com>
Date: 2014-07-28 02:11:17 

Hi, Andreas,

On 07/25/2014 09:11 PM, Andreas F?rber wrote:
Hi Jaehoon,

Am 25.07.2014 03:11, schrieb Jaehoon Chung:
quoted
Almost Soc is used the slot per a host.
Something's very wrong with this sentence. What are you trying to say?
Almost all SoCs use one slot only per host controller device?
If you are confusion for this sentence, sorry.
It means that we recommend only one slot per host controller.
Some controller can be supported the multiple slot per a host controller.
But i didn't find anywhere it used the multiple slot per a host controller.


Best Regards,
Jaehoon Chung
quoted
Don't use the slot-node and deprecated the "supports-highsped" property.
s/deprecated/deprecate/ ?
s/highsped/highspeed/

quoted
Instead, use the cap-mmc/sd-highspeed.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Tushar Behera <redacted>
Reviewed-by: Ulf Hansson <redacted>
Tested-by: Sachin Kamat <redacted>
Acked-by: Seungwon Jeon <redacted>
---
 .../devicetree/bindings/mmc/exynos-dw-mshc.txt     |   17 +++++------------
 .../devicetree/bindings/mmc/k3-dw-mshc.txt         |   12 +++++-------
 .../devicetree/bindings/mmc/synopsys-dw-mshc.txt   |   12 +++++-------
 3 files changed, 15 insertions(+), 26 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
index 532b1d4..9308325 100644
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -46,13 +46,14 @@ Required Properties:
       - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
         phase shift clocks should be 0.
 
-Required properties for a slot:
+Required properties for a slot (Deprecated - Recommend to use one slot per a host):
"per host"

quoted
 
 * gpios: specifies a list of gpios used for command, clock and data bus. The
   first gpio is the command line and the second gpio is the clock line. The
   rest of the gpios (depending on the bus-width property) are the data lines in
   no particular order. The format of the gpio specifier depends on the gpio
   controller.
+ (Deprecated - Refer to Documentaion/devicetree/binding/pinctrl/samsung-pinctrl.txt)
"Documentation/"

Nit: Is the indentation intentional? (parenthesis not aligned with text)

quoted
 
 Example:
 
@@ -69,21 +70,13 @@ Example:
 
 	dwmmc0 at 12200000 {
 		num-slots = <1>;
-		supports-highspeed;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
 		broken-cd;
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <8>;
-			gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
-				<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
-				<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
-				<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
-				<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
-		};
+		bus-width = <8>;
 	};
diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
index e5bc49f..3b35449 100644
--- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
@@ -34,13 +34,11 @@ Example:
 		num-slots = <1>;
 		vmmc-supply = <&ldo12>;
 		fifo-depth = <0x100>;
-		supports-highspeed;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>;
-		slot at 0 {
-			reg = <0>;
-			bus-width = <4>;
-			disable-wp;
-			cd-gpios = <&gpio10 3 0>;
-		};
+		bus-width = <4>;
+		disable-wp;
+		cd-gpios = <&gpio10 3 0>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
 	};
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
index 2d4a725..346c609 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -67,7 +67,8 @@ Optional properties:
 * card-detect-delay: Delay in milli-seconds before detecting card after card
   insert event. The default value is 0.
 
-* supports-highspeed: Enables support for high speed cards (up to 50MHz)
+* supports-highspeed (DEPRECATED): Enables support for high speed cards (up to 50MHz)
+			   (use "cap-mmc-highspeed" or "cap-sd-highspeed" instead)
 
 * broken-cd: as documented in mmc core bindings.
 
@@ -98,14 +99,11 @@ board specific portions as listed below.
 		clock-frequency = <400000000>;
 		clock-freq-min-max = <400000 200000000>;
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		vmmc-supply = <&buck8>;
-
-		slot at 0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
 	};
Regards,
Andreas





  

    
Re: [PATCHv6 3/5] ARM: dts: socfpga: unuse the slot-node and deprecated the supports-highspeed for dw-mmc

    

      From: Pavel Machek <hidden>

      Date: 2014-08-25 11:18:02 
    

  

  
On Fri 2014-07-25 10:11:51, Jaehoon Chung wrote:
dw-mmc controller can support multiple slots.
But, there are no use-cases anywhere. So we don't need to support the
slot-node for dw-mmc controller.
And "supports-highspeed" property in dw-mmc is deprecated.
"supports-highspeed" property can be replaced to "cap-sd/mmc-highspeed".

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Tushar Behera <redacted>
Reviewed-by: Ulf Hansson <redacted>
Acked-by: Seungwon Jeon <redacted>
Acked-by: Dinh Nguyen <redacted>
So, controller supports it, and slot representation makes sense, but
we move to less logical representation that will break when someone
actually does two slots?

NAK, for what it is worth. 
								Pavel

quoted hunk
---
 arch/arm/boot/dts/socfpga_arria5.dtsi   |    9 +++------
 arch/arm/boot/dts/socfpga_cyclone5.dtsi |    9 +++------
 arch/arm/boot/dts/socfpga_vt.dts        |    9 +++------
 3 files changed, 9 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi
index 12d1c2c..468fc4c 100644
--- a/arch/arm/boot/dts/socfpga_arria5.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
@@ -29,13 +29,10 @@
 
 		dwmmc0 at ff704000 {
 			num-slots = <1>;
-			supports-highspeed;
 			broken-cd;
-
-			slot at 0 {
-				reg = <0>;
-				bus-width = <4>;
-			};
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
 		};
 
 		sysmgr at ffd08000 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
index bf51182..1ee03c4 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
@@ -30,13 +30,10 @@
 
 		dwmmc0 at ff704000 {
 			num-slots = <1>;
-			supports-highspeed;
 			broken-cd;
-
-			slot at 0 {
-				reg = <0>;
-				bus-width = <4>;
-			};
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
 		};
 
 		ethernet at ff702000 {
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts
index 09792b4..f9345e0 100644
--- a/arch/arm/boot/dts/socfpga_vt.dts
+++ b/arch/arm/boot/dts/socfpga_vt.dts
@@ -43,13 +43,10 @@
 
 		dwmmc0 at ff704000 {
 			num-slots = <1>;
-			supports-highspeed;
 			broken-cd;
-
-			slot at 0 {
-				reg = <0>;
-				bus-width = <4>;
-			};
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
 		};
 
 		ethernet at ff700000 {
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html




    
  

  
    

      

        Keyboard shortcuts
      

      

        
          
hback out one level

          
jnext message in thread

          
kprevious message in thread

          
ldrill in

          
Escclose help / fold thread tree

          
?toggle this help