[PATCH v3 7/8] ARM: dts: cubox-i: add eSATA DT configuration

Add the transmit level, boost and attenuation parameters necessary for
the eSATA interface on Cubox-i to work.

Signed-off-by: Russell King <redacted>
---
 arch/arm/boot/dts/imx6q-cubox-i.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts
index bc5f31e3e892..941365d7ee65 100644
--- a/arch/arm/boot/dts/imx6q-cubox-i.dts
+++ b/arch/arm/boot/dts/imx6q-cubox-i.dts

@@ -13,4 +13,7 @@
 
 &sata {
 	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
 };

-- 
1.8.3.1

On Tue, Jun 24, 2014 at 11:19:58AM +0100, Russell King wrote:

Add the transmit level, boost and attenuation parameters necessary for
the eSATA interface on Cubox-i to work.

Signed-off-by: Russell King <redacted>

Applied #7 and #8, thanks.