[PATCH v2 09/12] ARM: dts: berlin: add BG2Q nodes for USB support
From: Antoine Ténart <hidden>
Date: 2014-06-24 10:36:51
Also in:
linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Adds nodes describing the Marvell Berlin BG2Q USB PHY and USB. The BG2Q SoC has 3 USB host controller, compatible with ChipIdea. Signed-off-by: Antoine T?nart <redacted> --- arch/arm/boot/dts/berlin2q.dtsi | 52 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index a6f7ec325200..0726ab891e0a 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi@@ -111,6 +111,39 @@ #interrupt-cells = <3>; }; + usb_phy2: usb-phy at a2f400 { + compatible = "marvell,berlin2-usb-phy"; + reg = <0xa2f400 0x128>; + #phy-cells = <0>; + resets = <&chip 0x104 14>; + status = "disabled"; + }; + + usb2: usb at a30000 { + compatible = "chipidea-usb"; + reg = <0xa30000 0x10000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&chip CLKID_USB2>; + usb-phy = <&usb_phy2>; + status = "disabled"; + }; + + usb_phy0: usb-phy at b74000 { + compatible = "marvell,berlin2-usb-phy"; + reg = <0xb74000 0x128>; + #phy-cells = <0>; + resets = <&chip 0x104 12>; + status = "disabled"; + }; + + usb_phy1: usb-phy at b78000 { + compatible = "marvell,berlin2-usb-phy"; + reg = <0xb78000 0x128>; + #phy-cells = <0>; + resets = <&chip 0x104 13>; + status = "disabled"; + }; + apb at e80000 { compatible = "simple-bus"; #address-cells = <1>;
@@ -304,6 +337,24 @@ clock-names = "refclk"; }; + usb0: usb at ed0000 { + compatible = "chipidea-usb"; + reg = <0xed0000 0x10000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&chip CLKID_USB0>; + usb-phy = <&usb_phy0>; + status = "disabled"; + }; + + usb1: usb at ee0000 { + compatible = "chipidea-usb"; + reg = <0xee0000 0x10000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&chip CLKID_USB1>; + usb-phy = <&usb_phy1>; + status = "disabled"; + }; + apb at fc0000 { compatible = "simple-bus"; #address-cells = <1>;
@@ -360,5 +411,6 @@ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; }; }; + }; };
--
1.9.1