Commit 650e3f0d66ad ("ARM: msm: Consolidate and move DEBUG_LL to
DEBUG_LL choice") appears to have renamed
    MSM_DEBUG_UART1
    MSM_DEBUG_UART2
    MSM_DEBUG_UART3

to
    DEBUG_MSM_UART1
    DEBUG_MSM_UART2
    DEBUG_MSM_UART3

It missed a check for CONFIG_MSM_DEBUG_UART1 and a check for
CONFIG_MSM_DEBUG_UART3 in the code. Rename these too.

Fixes: 650e3f0d66ad ("ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice")
Signed-off-by: Paul Bolle <redacted>
---
Untested.

These few lines were, well, broken since v3.3. Did no one notice?

 arch/arm/mach-msm/board-trout-gpio.c | 2 +-
 arch/arm/mach-msm/board-trout.c      | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c
index 87e1d01edecc..a92efc83cdb7 100644
--- a/arch/arm/mach-msm/board-trout-gpio.c
+++ b/arch/arm/mach-msm/board-trout-gpio.c

@@ -94,7 +94,7 @@ static int trout_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 	}
 
 static struct msm_gpio_chip msm_gpio_banks[] = {
-#if defined(CONFIG_MSM_DEBUG_UART1)
+#if defined(CONFIG_DEBUG_MSM_UART1)
 	/* H2W pins <-> UART1 */
 	TROUT_GPIO_BANK("MISC2", 0x00,   TROUT_GPIO_MISC2_BASE, 0x40),
 #else

diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 015d544aa017..27121b391275 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c

@@ -90,7 +90,7 @@ static void __init trout_map_io(void)
 	msm_map_common_io();
 	iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc));
 
-#ifdef CONFIG_MSM_DEBUG_UART3
+#ifdef CONFIG_DEBUG_MSM_UART3
 	/* route UART3 to the "H2W" extended usb connector */
 	writeb(0x80, TROUT_CPLD_BASE + 0x00);
 #endif

-- 
1.9.0