[PATCH] ARM: imx6: dmo edmqmx6 updates

STALE4614d

7 messages, 3 authors, 2014-01-18 · open the first message on its own page

[PATCH] ARM: imx6: dmo edmqmx6 updates

From: s.hauer@pengutronix.de (Sascha Hauer)
Date: 2014-01-16 12:52:26 

This series adds some additional features to the recently introduced
DataModul edmqmx6 board.

Sascha

----------------------------------------------------------------
Philipp Zabel (1):
      ARM: dts: imx6: edmqmx6: add PF0100 PMIC to device tree

Sascha Hauer (3):
      ARM: dts: imx6: edmqmx6: Add usdhc4 (emmc) support
      ARM: dts: imx6: edmqmx6: Add sata support
      ARM: dts: imx6: edmqmx6: Add LED support

 arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 148 ++++++++++++++++++++++++++++++++
 1 file changed, 148 insertions(+)

[PATCH 1/4] ARM: dts: imx6: edmqmx6: Add usdhc4 (emmc) support

From: s.hauer@pengutronix.de (Sascha Hauer)
Date: 2014-01-16 12:52:27 

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index 84f5143..7ce2038 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -141,6 +141,10 @@
 		pinctrl_usdhc3: usdhc3grp {
 			fsl,pins = <MX6QDL_USDHC3_PINGRP_D4>;
 		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <MX6QDL_USDHC4_PINGRP_D8>;
+		};
 	};
 };
 
@@ -176,3 +180,12 @@
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
-- 
1.8.5.2

[PATCH 2/4] ARM: dts: imx6: edmqmx6: Add sata support

From: s.hauer@pengutronix.de (Sascha Hauer)
Date: 2014-01-16 12:52:28 

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index 7ce2038..fe990bc 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -148,6 +148,10 @@
 	};
 };
 
+&sata {
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-- 
1.8.5.2

[PATCH 3/4] ARM: dts: imx6: edmqmx6: add PF0100 PMIC to device tree

From: s.hauer@pengutronix.de (Sascha Hauer)
Date: 2014-01-16 12:52:29 

From: Philipp Zabel <p.zabel@pengutronix.de>

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 104 ++++++++++++++++++++++++++++++++
 1 file changed, 104 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index fe990bc..bafc392 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -65,6 +65,7 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio3 23 0>;
+	phy-supply = <&vgen2_1v2_eth>;
 	status = "okay";
 };
 
@@ -75,6 +76,109 @@
 		     &pinctrl_stmpe>;
 	status = "okay";
 
+	pmic: pfuze100 at 08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_1v2_eth: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vdd_high_in: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
 	stmpe: stmpe1601 at 40 {
 		compatible = "st,stmpe1601";
 		reg = <0x40>;
-- 
1.8.5.2

[PATCH 4/4] ARM: dts: imx6: edmqmx6: Add LED support

From: s.hauer@pengutronix.de (Sascha Hauer)
Date: 2014-01-16 12:52:30 

The edmqmx6 has some GPIO controlled LEDs. Add support for them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index bafc392..b8a1ff4 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -58,6 +59,31 @@
 			enable-active-high;
 		};
 	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			label = "blue";
+			gpios = <&stmpe_gpio 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&stmpe_gpio 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-pink {
+			label = "pink";
+			gpios = <&stmpe_gpio 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-red {
+			label = "red";
+			gpios = <&stmpe_gpio 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
 };
 
 &fec {
@@ -186,6 +212,7 @@
 		interrupt-parent = <&gpio3>;
 
 		stmpe_gpio: stmpe_gpio {
+			#gpio-cells = <2>;
 			compatible = "st,stmpe-gpio";
 		};
 	};
-- 
1.8.5.2

[PATCH] ARM: imx6: dmo edmqmx6 updates

From: Silvio F. <hidden>
Date: 2014-01-17 09:27:24 

Hi,

This series adds some additional features to the recently introduced
DataModul edmqmx6 board.

Sascha

----------------------------------------------------------------
Philipp Zabel (1):
      ARM: dts: imx6: edmqmx6: add PF0100 PMIC to device tree

Sascha Hauer (3):
      ARM: dts: imx6: edmqmx6: Add usdhc4 (emmc) support
      ARM: dts: imx6: edmqmx6: Add sata support
      ARM: dts: imx6: edmqmx6: Add LED support

 arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 148 ++++++++++++++++++++++++++++++++
 1 file changed, 148 insertions(+)
For the complete patchset:

Tested-by: Silvio F. <redacted>
Acked-by: Silvio F. <redacted>


Cheers,
    Silvio

-- 
-- S. Fricke ---------------------------------------- silvio at port1024.net --
   Diplom-Informatiker (FH)
   Linux-Entwicklung             JABBER: silvio at conversation.port1024.net   
----------------------------------------------------------------------------

[PATCH] ARM: imx6: dmo edmqmx6 updates

From: Shawn Guo <hidden>
Date: 2014-01-18 08:45:53 

On Thu, Jan 16, 2014 at 01:52:26PM +0100, Sascha Hauer wrote:
Philipp Zabel (1):
      ARM: dts: imx6: edmqmx6: add PF0100 PMIC to device tree

Sascha Hauer (3):
      ARM: dts: imx6: edmqmx6: Add usdhc4 (emmc) support
      ARM: dts: imx6: edmqmx6: Add sata support
      ARM: dts: imx6: edmqmx6: Add LED support
Applied all 4, thanks.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help