[PATCH] tty/serial: atmel_serial: remove dev_dbg in atmel_set_termios
From: Nicolas Ferre <hidden>
Date: 2014-01-22 09:39:01
Also in:
linux-serial, lkml
Subsystem:
microchip at91 serial driver, the rest, tty layer and serial drivers · Maintainers:
Richard Genoud, Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
This fixes a driver bug which stopped the whole system (in case of serial console). This log message is not useful anyway as this information is printed elsewhere. Signed-off-by: Nicolas Ferre <redacted> --- drivers/tty/serial/atmel_serial.c | 3 --- 1 file changed, 3 deletions(-)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index a49f10d269b2..3d7206fc532f 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c@@ -1853,13 +1853,10 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, mode &= ~ATMEL_US_USMODE; if (atmel_port->rs485.flags & SER_RS485_ENABLED) { - dev_dbg(port->dev, "Setting UART to RS485\n"); if ((atmel_port->rs485.delay_rts_after_send) > 0) UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; - } else { - dev_dbg(port->dev, "Setting UART to RS232\n"); } /* set the parity, stop bits and data size */
--
1.8.2.2