[PATCHv9 2/4] ARM: dts: Add Freescale FTM PWM node for VF610.

This adds devicetree node for VF610, and there are 8 channels
supported.

Signed-off-by: Xiubo Li <redacted>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
---

No changes since v7.


 arch/arm/boot/dts/vf610.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index d31ce1b..6cce861 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi

@@ -152,6 +152,19 @@
 				clock-names = "pit";
 			};
 
+			pwm0: pwm at 40038000 {
+				compatible = "fsl,vf610-ftm-pwm";
+				#pwm-cells = <3>;
+				reg = <0x40038000 0x1000>;
+				clock-names = "ftm_sys", "ftm_ext",
+					      "ftm_fix", "ftm_cnt_clk_en";
+				clocks = <&clks VF610_CLK_FTM0>,
+					<&clks VF610_CLK_FTM0_EXT_SEL>,
+					<&clks VF610_CLK_FTM0_FIX_SEL>,
+					<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
+				status = "disabled";
+			};
+
 			wdog at 4003e000 {
 				compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
 				reg = <0x4003e000 0x1000>;

-- 
1.8.4

Signed-off-by: Xiubo Li <redacted>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
---


No changes since v7.




 arch/arm/boot/dts/vf610-twr.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index c3a3237..d5c6a39 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts

@@ -100,6 +100,12 @@
 	status = "okay";
 };
 
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_1>;
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_1>;

-- 
1.8.4

Hi Xiubo,

On Tue, Jan 07, 2014 at 04:13:57PM +0800, Xiubo Li wrote:

This adds devicetree node for VF610, and there are 8 channels
supported.

Signed-off-by: Xiubo Li <redacted>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>

Has the FTM PWM device tree bindings been accepted/merged?  Please only
send me DTS changes after that.  Also when you send me the DTS changes,
please base on imx/dt or for-next branch of my git tree below.

  git://git.linaro.org/people/shawnguo/linux-2.6.git

Shawn

Has the FTM PWM device tree bindings been accepted/merged?  Please only
send me DTS changes after that.  Also when you send me the DTS changes,
please base on imx/dt or for-next branch of my git tree below.

  git://git.linaro.org/people/shawnguo/linux-2.6.git

Yes, I will resend these dt patches after the FTM driver has been merged
bases on this tree.

Thanks,

Xiubo