# \[PATCH v3 9/9\] ARM: dts: add usb udc support to bcm281xx - From: Matt Porter \ - Date: 2013-11-25 18:17:06 - List: linux-arm-kernel - Page: https://ratatoskr.run/linux-arm-kernel/2013/11/4154357 - Thread: https://ratatoskr.run/linux-arm-kernel/2013/11/4154352/t.md ```text Adds USB OTG/PHY and clock support to BCM281xx and enables UDC support on the bcm11351-brt and bcm28155-ap boards. Signed-off-by: Matt Porter Reviewed-by: Markus Mayer Reviewed-by: Tim Kryger --- arch/arm/boot/dts/bcm11351-brt.dts | 6 ++++++ arch/arm/boot/dts/bcm11351.dtsi | 18 ++++++++++++++++++ arch/arm/boot/dts/bcm28155-ap.dts | 8 ++++++++ 3 files changed, 32 insertions(+) diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts index 23cd16d..396b704 100644 --- a/arch/arm/boot/dts/bcm11351-brt.dts +++ b/arch/arm/boot/dts/bcm11351-brt.dts @@ -44,5 +44,11 @@ status = "okay"; }; + usbotg: usb at 3f120000 { + status = "okay"; + }; + usbphy: usb-phy at 3f130000 { + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index 1246885..868879a 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -243,4 +243,22 @@ #clock-cells = <0>; }; }; + + usbotg: usb at 3f120000 { + compatible = "snps,dwc2"; + reg = <0x3f120000 0x10000>; + interrupts = ; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "device"; + status = "disabled"; + }; + + usbphy: usb-phy at 3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts index 08e47c2..a3bc436 100644 --- a/arch/arm/boot/dts/bcm28155-ap.dts +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -43,4 +43,12 @@ cd-gpios = <&gpio 14 0>; status = "okay"; }; + + usbotg: usb at 3f120000 { + status = "okay"; + }; + + usbphy: usb-phy at 3f130000 { + status = "okay"; + }; }; -- 1.8.4 ```