[PATCH] ARM: Add kernel build # to build message
From: Roy Franz <hidden>
Date: 2013-07-03 03:45:10
Subsystem:
arm port, the rest · Maintainers:
Russell King, Linus Torvalds
from: Roy Franz <redacted> Add the display of the incrementing kernel build number, similar to the x86 build. Example output: Kernel: arch/arm/boot/zImage is ready (#94) Signed-off-by: Roy Franz <redacted> --- arch/arm/boot/Makefile | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 84aa2ca..f1192f5 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile@@ -31,7 +31,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE $(call if_changed,objcopy) - @$(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' + @$(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' ' (#'`cat .version`')' $(obj)/Image $(obj)/zImage: FORCE @echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
@@ -46,14 +46,14 @@ $(obj)/xipImage: FORCE $(obj)/Image: vmlinux FORCE $(call if_changed,objcopy) - @$(kecho) ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' ' (#'`cat .version`')' $(obj)/compressed/vmlinux: $(obj)/Image FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) - @$(kecho) ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' ' (#'`cat .version`')' endif
@@ -78,7 +78,7 @@ fi $(obj)/uImage: $(obj)/zImage FORCE @$(check_for_multiple_loadaddr) $(call if_changed,uimage) - @$(kecho) ' Image $@ is ready' + @$(kecho) ' Image $@ is ready' ' (#'`cat .version`')' $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(Q)$(MAKE) $(build)=$(obj)/bootp $@
@@ -86,7 +86,7 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) - @$(kecho) ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' ' (#'`cat .version`')' PHONY += initrd FORCE initrd:
--
1.7.10.4