Thread (25 messages) 25 messages, 5 authors, 2013-01-31
STALE4877d

[PATCH 03/10] gpio: pxa: avoid to use global irq base

From: haojian.zhuang@linaro.org (Haojian Zhuang)
Date: 2013-01-29 16:13:28

On 28 January 2013 19:07, Igor Grinberg [off-list ref] wrote:
On 01/23/13 10:25, Haojian Zhuang wrote:
quoted
Avoid to use global irq_base in gpio-pxa driver. Define irq_base in each
pxa_gpio_chip instead. Then we can avoid to use macro PXA_GPIO_TO_IRQ() &
MMP_GPIO_TO_IRQ().

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
 arch/arm/mach-pxa/pxa25x.c |    2 +-
 arch/arm/mach-pxa/pxa27x.c |    2 +-
 drivers/gpio/gpio-pxa.c    |  142 ++++++++++++++++++++++----------------------
 include/linux/gpio-pxa.h   |    4 +-
 4 files changed, 77 insertions(+), 73 deletions(-)
[...]
quoted
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index 8e66c6b..da6e7fd 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
[...]
quoted
@@ -485,7 +452,7 @@ static int pxa_irq_domain_map(struct irq_domain *d, unsigned int irq,
      return 0;
 }

-const struct irq_domain_ops pxa_irq_domain_ops = {
+static const struct irq_domain_ops pxa_irq_domain_ops = {
      .map    = pxa_irq_domain_map,
      .xlate  = irq_domain_xlate_twocell,
 };
You should also move this out of CONFIG_OF as I don't think it is a dependency,
and also otherwise you get the below...
quoted
@@ -529,14 +496,6 @@ static int pxa_gpio_probe_dt(struct platform_device *pdev)
      nr_gpios = nr_banks << 5;
      pxa_last_gpio = nr_gpios - 1;

-     irq_base = irq_alloc_descs(-1, 0, nr_gpios, 0);
-     if (irq_base < 0) {
-             dev_err(&pdev->dev, "Failed to allocate IRQ numbers\n");
-             goto err;
-     }
-     domain = irq_domain_add_legacy(np, nr_gpios, irq_base, 0,
-                                    &pxa_irq_domain_ops, NULL);
-     pxa_gpio_of_node = np;
      return 0;
 err:
      iounmap(gpio_reg_base);
@@ -546,6 +505,56 @@ err:
 #define pxa_gpio_probe_dt(pdev)              (-1)
 #endif

+static int pxa_init_gpio_chip(struct platform_device *pdev, int gpio_end,
+                           int (*set_wake)(unsigned int, unsigned int))
+{
+     int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
+     struct pxa_gpio_chip *chips;
+
+     chips = devm_kzalloc(&pdev->dev, nbanks * sizeof(*chips), GFP_KERNEL);
+     if (chips == NULL) {
+             pr_err("%s: failed to allocate GPIO chips\n", __func__);
+             return -ENOMEM;
+     }
+
+     for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
+             struct gpio_chip *c = &chips[i].chip;
+
+             sprintf(chips[i].label, "gpio-%d", i);
+             chips[i].regbase = gpio_reg_base + BANK_OFF(i);
+             chips[i].set_wake = set_wake;
+
+             c->base  = gpio;
+             c->label = chips[i].label;
+
+             c->direction_input  = pxa_gpio_direction_input;
+             c->direction_output = pxa_gpio_direction_output;
+             c->get = pxa_gpio_get;
+             c->set = pxa_gpio_set;
+             c->to_irq = pxa_gpio_to_irq;
+#ifdef CONFIG_OF_GPIO
+             c->of_node = pxa_gpio_of_node;
+             c->of_xlate = pxa_gpio_of_xlate;
+             c->of_gpio_n_cells = 2;
+#endif
+
+             /* number of GPIOs on last bank may be less than 32 */
+             c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32;
+
+             chips[i].irq_base = irq_alloc_descs(-1, 0, c->ngpio, 0);
+             if (chips[i].irq_base < 0)
+                     return -EINVAL;
+             if (!irq_domain_add_legacy(pdev->dev.of_node, c->ngpio,
+                                        chips[i].irq_base, 0,
+                                        &pxa_irq_domain_ops, &chips[i]))
if !CONFIG_OF, you get:
drivers/gpio/gpio-pxa.c:479: error: 'pxa_irq_domain_ops' undeclared (first use in this function)

Also, for !CONFIG_IRQ_DOMAIN, you get:
drivers/gpio/gpio-pxa.c: In function 'pxa_init_gpio_chip':
drivers/gpio/gpio-pxa.c:477: error: implicit declaration of function 'irq_domain_add_legacy'

Should we select IRQ_DOMAIN for PXA?
Will it work for other drivers?
We could use IRQ_DOMAIN. After all these patches are applied, there's
no CONFIG_IRQ_DOMAIN in pxa-gpio.c.
I tested the gpio driver on pxa910 (arch/mmp) w/wo CONFIG_OF. It works.

Thanks for your test. I'm sorry that I didn't do enough build test on
pxa. I'll fix all these issues.
quoted
+                     return -ENODEV;
+
+             gpiochip_add(c);
+     }
+     pxa_gpio_chips = chips;
+     return 0;
+}
+
 static int pxa_gpio_probe(struct platform_device *pdev)
 {
      struct pxa_gpio_chip *c;
[...]


--
Regards,
Igor.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help