[PATCH 01/11] ARM: nomadik: move last custom calls to pinctrl
From: Linus Walleij <hidden>
Date: 2013-01-07 22:55:49
Subsystem:
arm port, arm/nomadik/ux500 architectures, the rest · Maintainers:
Russell King, Linus Walleij, Linus Torvalds
The I2C pins were still set up using custom nmk_* calls, move these to use the pinctrl mapping table instead. There was also a remaining call to turn the Ethernet pin to GPIO, and this is now done implicitly by the GPIO-to-pinctrl range translation calls. Signed-off-by: Linus Walleij <redacted> --- arch/arm/mach-nomadik/board-nhk8815.c | 10 +++++++++- arch/arm/mach-nomadik/i2c-8815nhk.c | 11 ----------- 2 files changed, 9 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 9f19069..75075ab 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c@@ -239,7 +239,6 @@ static int __init nhk8815_eth_init(void) int err; err = gpio_request(gpio_nr, "eth_irq"); - if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO); if (!err) err = gpio_direction_input(gpio_nr); if (err) pr_err("Error %i in %s\n", err, __func__);
@@ -326,6 +325,15 @@ static struct pinctrl_map __initdata nhk8815_pinmap[] = { PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull), /* CD bias drive */ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low), + /* I2C0 */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO62_D3", in_pullup), + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO63_D2", in_pullup), + /* I2C1 */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO53_L4", in_pullup), + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO54_L3", in_pullup), + /* I2C2 */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO73_C21", in_pullup), + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO74_C20", in_pullup), }; static void __init nhk8815_platform_init(void)
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
index 0c2f662..f0e9e64 100644
--- a/arch/arm/mach-nomadik/i2c-8815nhk.c
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c@@ -4,7 +4,6 @@ #include <linux/i2c-algo-bit.h> #include <linux/i2c-gpio.h> #include <linux/platform_device.h> -#include <linux/platform_data/pinctrl-nomadik.h> /* * There are two busses in the 8815NHK.
@@ -57,18 +56,8 @@ static struct platform_device nhk8815_i2c_dev2 = { }, }; -static pin_cfg_t cpu8815_pins_i2c[] = { - PIN_CFG_INPUT(62, GPIO, PULLUP), - PIN_CFG_INPUT(63, GPIO, PULLUP), - PIN_CFG_INPUT(53, GPIO, PULLUP), - PIN_CFG_INPUT(54, GPIO, PULLUP), - PIN_CFG_INPUT(73, GPIO, PULLUP), - PIN_CFG_INPUT(74, GPIO, PULLUP), -}; - static int __init nhk8815_i2c_init(void) { - nmk_config_pins(cpu8815_pins_i2c, ARRAY_SIZE(cpu8815_pins_i2c)); platform_device_register(&nhk8815_i2c_dev0); platform_device_register(&nhk8815_i2c_dev1); platform_device_register(&nhk8815_i2c_dev2);
--
1.7.11.7