[PATCH v5 05/22] mfd: omap-usb-tll: introduce and use mode_needs_tll()
From: Roger Quadros <hidden>
Date: 2013-01-02 15:01:20
Also in:
linux-omap, lkml
Subsystem:
multifunction devices (mfd), omap2+ support, the rest · Maintainers:
Lee Jones, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
This is a handy macro to check if the port requires the USB TLL module or not. Use it to Enable the TLL module and manage the clocks. Signed-off-by: Roger Quadros <redacted> --- drivers/mfd/omap-usb-tll.c | 20 ++++++++++++-------- 1 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index 238d05d..b188ee8 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c@@ -95,6 +95,10 @@ #define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL) +/* only PHY and UNUSED modes don't need TLL */ +#define omap_usb_mode_needs_tll(x) ((x != OMAP_USBHS_PORT_MODE_UNUSED) &&\ + (x != OMAP_EHCI_PORT_MODE_PHY)) + struct usbtll_omap { int nch; /* num. of channels */ struct usbtll_omap_platform_data *pdata;
@@ -211,6 +215,7 @@ static int usbtll_omap_probe(struct platform_device *pdev) unsigned long flags; int ret = 0; int i, ver; + bool needs_tll; dev_dbg(dev, "starting TI HSUSB TLL Controller\n");
@@ -278,12 +283,11 @@ static int usbtll_omap_probe(struct platform_device *pdev) tll->ch_clk[i] = fck; } - if (is_ehci_tll_mode(pdata->port_mode[0]) || - is_ehci_tll_mode(pdata->port_mode[1]) || - is_ehci_tll_mode(pdata->port_mode[2]) || - is_ohci_port(pdata->port_mode[0]) || - is_ohci_port(pdata->port_mode[1]) || - is_ohci_port(pdata->port_mode[2])) { + needs_tll = false; + for (i = 0; i < tll->nch; i++) + needs_tll |= omap_usb_mode_needs_tll(pdata->port_mode[i]); + + if (needs_tll) { /* Program Common TLL register */ reg = usbtll_read(base, OMAP_TLL_SHARED_CONF);
@@ -371,7 +375,7 @@ static int usbtll_runtime_resume(struct device *dev) spin_lock_irqsave(&tll->lock, flags); for (i = 0; i < tll->nch; i++) { - if (is_ehci_tll_mode(pdata->port_mode[i])) { + if (omap_usb_mode_needs_tll(pdata->port_mode[i])) { int r; if (!tll->ch_clk[i])
@@ -407,7 +411,7 @@ static int usbtll_runtime_suspend(struct device *dev) spin_lock_irqsave(&tll->lock, flags); for (i = 0; i < tll->nch; i++) { - if (is_ehci_tll_mode(pdata->port_mode[i])) { + if (omap_usb_mode_needs_tll(pdata->port_mode[i])) { if (tll->ch_clk[i]) clk_disable(tll->ch_clk[i]); }
--
1.7.4.1