[PATCH 1/2] ARM: versatile: bump IRQ numbers
From: Linus Walleij <hidden>
Date: 2012-12-20 18:53:41
Subsystem:
arm integrator, versatile and realview support, arm port, arm/versatile express platform, the rest · Maintainers:
Linus Walleij, Russell King, Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi, Linus Torvalds
From: Linus Walleij <redacted> The Versatile starts to register Linux IRQ numbers from offset 0 which is illegal, since this is NO_IRQ. Bump all hard-coded IRQs by 32 to get rid of the problem. Cc: Grant Likely <redacted> Cc: Russell King - ARM Linux <redacted> Signed-off-by: Linus Walleij <redacted> --- arch/arm/mach-versatile/include/mach/irqs.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
index bf44c61..0fd771c 100644
--- a/arch/arm/mach-versatile/include/mach/irqs.h
+++ b/arch/arm/mach-versatile/include/mach/irqs.h@@ -25,7 +25,7 @@ * IRQ interrupts definitions are the same as the INT definitions * held within platform.h */ -#define IRQ_VIC_START 0 +#define IRQ_VIC_START 32 #define IRQ_WDOGINT (IRQ_VIC_START + INT_WDOGINT) #define IRQ_SOFTINT (IRQ_VIC_START + INT_SOFTINT) #define IRQ_COMMRx (IRQ_VIC_START + INT_COMMRx)
@@ -100,7 +100,7 @@ /* * Secondary interrupt controller */ -#define IRQ_SIC_START 32 +#define IRQ_SIC_START 64 #define IRQ_SIC_MMCI0B (IRQ_SIC_START + SIC_INT_MMCI0B) #define IRQ_SIC_MMCI1B (IRQ_SIC_START + SIC_INT_MMCI1B) #define IRQ_SIC_KMI0 (IRQ_SIC_START + SIC_INT_KMI0)
@@ -120,7 +120,7 @@ #define IRQ_SIC_PCI1 (IRQ_SIC_START + SIC_INT_PCI1) #define IRQ_SIC_PCI2 (IRQ_SIC_START + SIC_INT_PCI2) #define IRQ_SIC_PCI3 (IRQ_SIC_START + SIC_INT_PCI3) -#define IRQ_SIC_END 63 +#define IRQ_SIC_END 95 #define IRQ_GPIO0_START (IRQ_SIC_END + 1) #define IRQ_GPIO0_END (IRQ_GPIO0_START + 31)
--
1.7.11.3