[PATCH v2] ARM: Kirkwood: Add support LED of OpenBlocks A6
From: Nobuhiro Iwamatsu <hidden>
Date: 2012-11-23 20:24:09
Subsystem:
arm port, the rest · Maintainers:
Russell King, Linus Torvalds
OpenBlocks A6 has three leds via GPIO. This supports them. And this fix typo about led, because hardware manual has typo. Signed-off-by: Nobuhiro Iwamatsu <redacted> --- v2: Use gpio-leds, not gpio_leds. arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 19 +++++++++++++++++++ arch/arm/mach-kirkwood/board-openblocks_a6.c | 4 ++-- 2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index 37dc3a7..e303169 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts@@ -75,4 +75,23 @@ }; }; }; + + gpio-leds { + compatible = "gpio-leds"; + + led-red { + label = "obsa6:red:stat"; + gpios = <&gpio1 9 1>; + }; + + led-green { + label = "obsa6:green:stat"; + gpios = <&gpio1 10 1>; + }; + + led-yellow { + label = "obsa6:yellow:stat"; + gpios = <&gpio1 11 1>; + }; + }; };
diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c
index e71f984..815fc64 100644
--- a/arch/arm/mach-kirkwood/board-openblocks_a6.c
+++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c@@ -55,8 +55,8 @@ static unsigned int openblocks_a6_mpp_config[] __initdata = { MPP38_GPIO, /* INIT */ MPP39_GPIO, /* USB OC */ MPP41_GPIO, /* LED: Red */ - MPP42_GPIO, /* LED: Yellow */ - MPP43_GPIO, /* LED: Green */ + MPP42_GPIO, /* LED: Green */ + MPP43_GPIO, /* LED: Yellow */ 0, };
--
1.7.10.4