[PATCH 9/9] ARM: ux500: fixup magnetometer pins
From: Linus Walleij <hidden>
Date: 2012-11-06 13:16:06
Subsystem:
arm port, arm/nomadik/ux500 architectures, the rest · Maintainers:
Russell King, Linus Walleij, Linus Torvalds
From: Jorgen Jonsson <redacted> GPIO31 and GPIO32 (CTS/RTS) are handled by the magnetometer and shall not simultaneously be controlled by UART2. Reported-by: Peter Nessrup <redacted> Signed-off-by: Jorgen Jonsson <redacted> Reviewed-by: Patrice Chotard <redacted> Signed-off-by: Linus Walleij <redacted> --- arch/arm/mach-ux500/board-mop500-pins.c | 5 ----- 1 file changed, 5 deletions(-)
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index f9ef2f4..5770ed0 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c@@ -148,15 +148,10 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { * The setting on GPIO31 conflicts with magnetometer use on hrefv60 */ /* default state for UART2 */ - DB8500_MUX("u2ctsrts_c_1", "u2", "uart2"), - DB8500_PIN("GPIO31_V3", in_pu, "uart2"), /* CTS */ - DB8500_PIN("GPIO32_V2", out_hi, "uart2"), /* RTS */ DB8500_MUX("u2rxtx_c_1", "u2", "uart2"), DB8500_PIN("GPIO29_W2", in_pu, "uart2"), /* RXD */ DB8500_PIN("GPIO30_W3", out_hi, "uart2"), /* TXD */ /* Sleep state for UART2 */ - DB8500_PIN_SLEEP("GPIO31_V3", in_wkup_pdis, "uart2"), - DB8500_PIN_SLEEP("GPIO32_V2", out_hi_wkup_pdis, "uart2"), DB8500_PIN_SLEEP("GPIO29_W2", in_wkup_pdis, "uart2"), DB8500_PIN_SLEEP("GPIO30_W3", out_wkup_pdis, "uart2"), /*
--
1.7.11.3