[PATCH v2 3/3] ARM: Kirkwood: Convert IB62x0 to use gpio-poweroff.
From: Andrew Lunn <hidden>
Date: 2012-11-13 15:44:45
Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- arch/arm/boot/dts/kirkwood-ib62x0.dts | 6 ++++++ arch/arm/mach-kirkwood/board-ib62x0.c | 13 ------------- 2 files changed, 6 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index 66794ed..9b0e2e3 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts@@ -79,4 +79,10 @@ gpios = <&gpio0 27 0>; }; }; + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 24 1>; + }; + + };
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index cfc47f8..7b8adf5 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c@@ -17,7 +17,6 @@ #include <linux/mtd/partitions.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/gpio.h> #include <linux/input.h> #include <asm/mach-types.h> #include <asm/mach/arch.h>
@@ -25,8 +24,6 @@ #include "common.h" #include "mpp.h" -#define IB62X0_GPIO_POWER_OFF 24 - static struct mv643xx_eth_platform_data ib62x0_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), };
@@ -49,11 +46,6 @@ static unsigned int ib62x0_mpp_config[] __initdata = { 0 }; -static void ib62x0_power_off(void) -{ - gpio_set_value(IB62X0_GPIO_POWER_OFF, 1); -} - void __init ib62x0_init(void) { /*
@@ -63,9 +55,4 @@ void __init ib62x0_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&ib62x0_ge00_data); - if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 && - gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0) - pm_power_off = ib62x0_power_off; - else - pr_err("board-ib62x0: failed to configure power-off GPIO\n"); }
--
1.7.10.4