From: Kukjin Kim <hidden> Date: 2012-09-21 06:26:36
Hi Arnd, Olof
This is for updating Samsung DT for v3.7.
But now this makes many conflicts with pinctrl dt because of moving file
so I'm sorting them out to avoid useless conflicts.
I'll re-send this soon again.
This is jut for your information.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim [off-list ref], Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
The following changes since commit 5698bd757d55b1bb87edd1a9744ab09c142abfc2:
Linux 3.6-rc6 (2012-09-16 14:58:51 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
next/dt-samsung
Kukjin Kim (1):
ARM: dts: use uart2 for console on smdkv310 and smdk5250
Tomasz Figa (6):
ARM: dts: Move parts common to EXYNOS4 from exynos4210.dtsi to
exynos4.dtsi
ARM: EXYNOS: Use exynos4 prefix instead of exynos4210 on exynos4-dt
ARM: dts: Assume status of all optional nodes as disabled for exynos4
ARM: dts: Specify address and size cells for i2c controllers for
EXYNOS4
ARM: EXYNOS: Add OF compatibility lookups for EXYNOS4 i2c adapters
ARM: dts: Add basic dts file for Samsung Trats board
Tushar Behera (1):
ARM: dts: Enable on-board keys as wakeup source for exynos4210-origen
arch/arm/boot/dts/exynos4.dtsi | 248
+++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos4210-origen.dts | 63 +-------
arch/arm/boot/dts/exynos4210-smdkv310.dts | 54 +------
arch/arm/boot/dts/exynos4210-trats.dts | 237
+++++++++++++++++++++++++++
arch/arm/boot/dts/exynos4210.dtsi | 181 +---------------------
arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +-
arch/arm/mach-exynos/Makefile.boot | 2 +-
arch/arm/mach-exynos/mach-exynos4-dt.c | 32 +++-
8 files changed, 523 insertions(+), 296 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos4.dtsi
create mode 100644 arch/arm/boot/dts/exynos4210-trats.dts
From: Kukjin Kim <hidden> Date: 2012-09-21 08:18:21
On 09/21/12 15:26, Kukjin Kim wrote:
Hi Arnd, Olof
This is for updating Samsung DT for v3.7.
But now this makes many conflicts with pinctrl dt because of moving file
so I'm sorting them out to avoid useless conflicts.
I'll re-send this soon again.
This is jut for your information.
I created following branch which is merged on top of Samsung pinctrl and
board branches already are pulled into arm-soc.
This includes moving common exynos4 dt for supporting other exynos4xxxx
SoCs easily and adding exynos43210-trats board support and some updates.
Please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
next/dt-samsung-new
If any problems, please kindly let me know.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim [off-list ref], Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
The following changes since commit
5698bd757d55b1bb87edd1a9744ab09c142abfc2:
Linux 3.6-rc6 (2012-09-16 14:58:51 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
next/dt-samsung
Kukjin Kim (1):
ARM: dts: use uart2 for console on smdkv310 and smdk5250
Tomasz Figa (6):
ARM: dts: Move parts common to EXYNOS4 from exynos4210.dtsi to exynos4.dtsi
ARM: EXYNOS: Use exynos4 prefix instead of exynos4210 on exynos4-dt
ARM: dts: Assume status of all optional nodes as disabled for exynos4
ARM: dts: Specify address and size cells for i2c controllers for EXYNOS4
ARM: EXYNOS: Add OF compatibility lookups for EXYNOS4 i2c adapters
ARM: dts: Add basic dts file for Samsung Trats board
Tushar Behera (1):
ARM: dts: Enable on-board keys as wakeup source for exynos4210-origen
arch/arm/boot/dts/exynos4.dtsi | 248 +++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos4210-origen.dts | 63 +-------
arch/arm/boot/dts/exynos4210-smdkv310.dts | 54 +------
arch/arm/boot/dts/exynos4210-trats.dts | 237 +++++++++++++++++++++++++++
arch/arm/boot/dts/exynos4210.dtsi | 181 +---------------------
arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +-
arch/arm/mach-exynos/Makefile.boot | 2 +-
arch/arm/mach-exynos/mach-exynos4-dt.c | 32 +++-
8 files changed, 523 insertions(+), 296 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos4.dtsi
create mode 100644 arch/arm/boot/dts/exynos4210-trats.dts
From: Kukjin Kim <hidden> Date: 2012-09-27 01:04:53
Kukjin Kim wrote:
On 09/21/12 15:26, Kukjin Kim wrote:
quoted
Hi Arnd, Olof
This is for updating Samsung DT for v3.7.
But now this makes many conflicts with pinctrl dt because of moving file
so I'm sorting them out to avoid useless conflicts.
I'll re-send this soon again.
This is jut for your information.
I created following branch which is merged on top of Samsung pinctrl and
board branches already are pulled into arm-soc.
This includes moving common exynos4 dt for supporting other exynos4xxxx
SoCs easily and adding exynos43210-trats board support and some updates.
Please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
next/dt-samsung-new
If any problems, please kindly let me know.
Hi Arnd and Olof,
Maybe, you missed this one?
Note, this will make conflicts with Rob's change, move all dtb targets.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim [off-list ref], Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
quoted
The following changes since commit
5698bd757d55b1bb87edd1a9744ab09c142abfc2:
Linux 3.6-rc6 (2012-09-16 14:58:51 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
next/dt-samsung
Kukjin Kim (1):
ARM: dts: use uart2 for console on smdkv310 and smdk5250
Tomasz Figa (6):
ARM: dts: Move parts common to EXYNOS4 from exynos4210.dtsi to
exynos4.dtsi
quoted
ARM: EXYNOS: Use exynos4 prefix instead of exynos4210 on exynos4-dt
ARM: dts: Assume status of all optional nodes as disabled for exynos4
ARM: dts: Specify address and size cells for i2c controllers for EXYNOS4
ARM: EXYNOS: Add OF compatibility lookups for EXYNOS4 i2c adapters
ARM: dts: Add basic dts file for Samsung Trats board
Tushar Behera (1):
ARM: dts: Enable on-board keys as wakeup source for exynos4210-origen
arch/arm/boot/dts/exynos4.dtsi | 248 +++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos4210-origen.dts | 63 +-------
arch/arm/boot/dts/exynos4210-smdkv310.dts | 54 +------
arch/arm/boot/dts/exynos4210-trats.dts | 237 +++++++++++++++++++++++++++
arch/arm/boot/dts/exynos4210.dtsi | 181 +---------------------
arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +-
arch/arm/mach-exynos/Makefile.boot | 2 +-
arch/arm/mach-exynos/mach-exynos4-dt.c | 32 +++-
8 files changed, 523 insertions(+), 296 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos4.dtsi
create mode 100644 arch/arm/boot/dts/exynos4210-trats.dts
From: Olof Johansson <hidden> Date: 2012-09-29 18:36:39
On Thu, Sep 27, 2012 at 10:04:53AM +0900, Kukjin Kim wrote:
Kukjin Kim wrote:
quoted
On 09/21/12 15:26, Kukjin Kim wrote:
quoted
Hi Arnd, Olof
This is for updating Samsung DT for v3.7.
But now this makes many conflicts with pinctrl dt because of moving file
so I'm sorting them out to avoid useless conflicts.
I'll re-send this soon again.
This is jut for your information.
I created following branch which is merged on top of Samsung pinctrl and
board branches already are pulled into arm-soc.
This includes moving common exynos4 dt for supporting other exynos4xxxx
SoCs easily and adding exynos43210-trats board support and some updates.
Please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
next/dt-samsung-new
If any problems, please kindly let me know.
Hi Arnd and Olof,
Maybe, you missed this one?
Note, this will make conflicts with Rob's change, move all dtb targets.
Kukjin,
The branch contents is not the same as your repeated pull request, it had
patches added on the 26th and the original request was sent on the 21st. I've
pulled it anyway after reviewing those patches, but please be more transparent
with what you do to your branch if you update it after pull requests have been
sent.
Also, next time please do a full re-send of the pull request, I probably missed
it because it was a reply with just a new link and not the full diffstat, etc.
-Olof