[PATCH] ARM: ux500: tidy up pin sleep modes
From: Linus Walleij <hidden>
Date: 2012-09-18 11:27:28
From: Linus Walleij <redacted> This named the sleep mode pin configurations as *slpm* rather than *sleep* to correspond better with the settings from the datasheet. It also defines an optional sleep mode for the SPI controller SPI2. Signed-off-by: Linus Walleij <redacted> --- Arnd, Olof: again a patch I'd like to take through the pinctrl tree for simplicity. --- arch/arm/mach-ux500/board-mop500-pins.c | 48 ++++++++++++++++++++------------- 1 file changed, 29 insertions(+), 19 deletions(-)
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index 32fd992..3a314b0 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c@@ -32,14 +32,14 @@ static enum custom_pin_cfg_t pinsfor; BIAS(pd, PIN_PULL_DOWN); BIAS(slpm_gpio_nopull, PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); BIAS(in_nopull, PIN_INPUT_NOPULL); -BIAS(in_nopull_sleep_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE); +BIAS(in_nopull_slpm_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE); BIAS(in_pu, PIN_INPUT_PULLUP); BIAS(in_pd, PIN_INPUT_PULLDOWN); BIAS(in_pd_slpm_in_pu, PIN_INPUT_PULLDOWN|PIN_SLPM_INPUT_PULLUP); BIAS(in_pu_slpm_out_lo, PIN_INPUT_PULLUP|PIN_SLPM_OUTPUT_LOW); BIAS(out_hi, PIN_OUTPUT_HIGH); BIAS(out_lo, PIN_OUTPUT_LOW); -BIAS(out_lo_sleep_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE); +BIAS(out_lo_slpm_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE); /* These also force them into GPIO mode */ BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED); BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED);
@@ -48,11 +48,13 @@ BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SL BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED); BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED); /* Sleep modes */ -BIAS(sleep_in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(sleep_in_nopull_wkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE); -BIAS(sleep_out_hi_wkup_pdis, PIN_SLPM_OUTPUT_HIGH|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(sleep_out_lo_wkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE); -BIAS(sleep_out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_in_nopull_wkup, PIN_SLEEPMODE_ENABLED|PIN_SLPM_DIR_INPUT|PIN_SLPM_PULL_NONE|PIN_SLPM_WAKEUP_ENABLE); +BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_out_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_out_lo_wkup, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE); +BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); /* We use these to define hog settings that are always done on boot */ #define DB8500_MUX_HOG(group,func) \
@@ -65,6 +67,9 @@ BIAS(sleep_out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PD PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func) #define DB8500_PIN(pin,conf,dev) \ PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf) +#define DB8500_PIN_SLEEP(pin, conf, dev) \ + PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \ + pin, conf) #define DB8500_PIN_SLEEP(pin,conf,dev) \ PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \
@@ -134,22 +139,22 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */ DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */ /* UART0 sleep state */ - DB8500_PIN_SLEEP("GPIO0_AJ5", sleep_in_wkup_pdis, "uart0"), - DB8500_PIN_SLEEP("GPIO1_AJ3", sleep_out_hi_wkup_pdis, "uart0"), - DB8500_PIN_SLEEP("GPIO2_AH4", sleep_in_wkup_pdis, "uart0"), - DB8500_PIN_SLEEP("GPIO3_AH3", sleep_out_wkup_pdis, "uart0"), + DB8500_PIN_SLEEP("GPIO0_AJ5", slpm_in_wkup_pdis, "uart0"), + DB8500_PIN_SLEEP("GPIO1_AJ3", slpm_out_hi_wkup_pdis, "uart0"), + DB8500_PIN_SLEEP("GPIO2_AH4", slpm_in_wkup_pdis, "uart0"), + DB8500_PIN_SLEEP("GPIO3_AH3", slpm_out_wkup_pdis, "uart0"), /* MSP1 for ALSA codec */ DB8500_MUX("msp1txrx_a_1", "msp1", "ux500-msp-i2s.1"), DB8500_MUX("msp1_a_1", "msp1", "ux500-msp-i2s.1"), - DB8500_PIN("GPIO33_AF2", out_lo_sleep_nowkup, "ux500-msp-i2s.1"), - DB8500_PIN("GPIO34_AE1", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"), - DB8500_PIN("GPIO35_AE2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"), - DB8500_PIN("GPIO36_AG2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"), + DB8500_PIN("GPIO33_AF2", out_lo_slpm_nowkup, "ux500-msp-i2s.1"), + DB8500_PIN("GPIO34_AE1", in_nopull_slpm_nowkup, "ux500-msp-i2s.1"), + DB8500_PIN("GPIO35_AE2", in_nopull_slpm_nowkup, "ux500-msp-i2s.1"), + DB8500_PIN("GPIO36_AG2", in_nopull_slpm_nowkup, "ux500-msp-i2s.1"), /* MSP1 sleep state */ - DB8500_PIN_SLEEP("GPIO33_AF2", sleep_out_lo_wkup, "ux500-msp-i2s.1"), - DB8500_PIN_SLEEP("GPIO34_AE1", sleep_in_nopull_wkup, "ux500-msp-i2s.1"), - DB8500_PIN_SLEEP("GPIO35_AE2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"), - DB8500_PIN_SLEEP("GPIO36_AG2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"), + DB8500_PIN_SLEEP("GPIO33_AF2", slpm_out_lo_wkup, "ux500-msp-i2s.1"), + DB8500_PIN_SLEEP("GPIO34_AE1", slpm_in_nopull_wkup, "ux500-msp-i2s.1"), + DB8500_PIN_SLEEP("GPIO35_AE2", slpm_in_nopull_wkup, "ux500-msp-i2s.1"), + DB8500_PIN_SLEEP("GPIO36_AG2", slpm_in_nopull_wkup, "ux500-msp-i2s.1"), /* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */ DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"), DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"),
@@ -224,6 +229,11 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */ DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */ DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */ + /* SPI2 sleep state */ + DB8500_PIN_SLEEP("GPIO216_AG12", slpm_in_wkup_pdis, "spi2"), /* FRM */ + DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */ + DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */ + DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */ }; /*
--
1.7.11.3