[PATCH v2 2/2] ARM: clk-imx25: Fix SSI clock registration

From: Fabio Estevam <redacted>

SSI block has two types of clock:

ipg: bus clock, the clock needed for accessing registers.
per: peripheral clock, the clock needed for generating the bit rate.

Currently SSI driver only supports slave mode and only need to handle
the ipg clock, because the peripheral clock comes from the master codec.

Only register the ipg clock and do not register the peripheral clock for ssi.

Signed-off-by: Fabio Estevam <redacted>
---
Changes since v1:
- Use imx-ssi.1 for ssi2_ipg

 arch/arm/mach-imx/clk-imx25.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index fdd8cc8..5ff9534 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c

@@ -222,10 +222,8 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0");
 	clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0");
 	clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
-	clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0");
-	clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0");
-	clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1");
-	clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1");
+	clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");
 	clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0");
 	clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0");
 	clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0");

-- 
1.7.9.5

On Sun, Aug 19, 2012 at 02:05:59PM -0300, Fabio Estevam wrote:

From: Fabio Estevam <redacted>

SSI block has two types of clock:

ipg: bus clock, the clock needed for accessing registers.
per: peripheral clock, the clock needed for generating the bit rate.

Currently SSI driver only supports slave mode and only need to handle
the ipg clock, because the peripheral clock comes from the master codec.

Only register the ipg clock and do not register the peripheral clock for ssi.

Signed-off-by: Fabio Estevam <redacted>

Applied and also added stable tag.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |