From: Samir Hachimi <redacted>
Add clock look-up for pwm.
Add the pinmux support for pwm.
Several pin can be set to PwmO for the same Pwm.
Signed-off-by: Samir Hachimi <redacted>
---
arch/arm/boot/dts/imx6q.dtsi | 68 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 68 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 925da33..346ae9c 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -268,23 +268,43 @@
};
pwm at 02080000 { /* PWM1 */
+ compatible = "fsl,imx6q-pwm";
+ #pwm-cells = <2>;
reg = <0x02080000 0x4000>;
interrupts = <0 83 0x04>;
+ clocks = <&clks 145>;
+ clock-names = "pwm";
+ status = "disabled";
};
pwm at 02084000 { /* PWM2 */
+ compatible = "fsl,imx6q-pwm";
+ #pwm-cells = <2>;
reg = <0x02084000 0x4000>;
interrupts = <0 84 0x04>;
+ clocks = <&clks 146>;
+ clock-names = "pwm";
+ status = "disabled";
};
pwm at 02088000 { /* PWM3 */
+ compatible = "fsl,imx6q-pwm";
+ #pwm-cells = <2>;
reg = <0x02088000 0x4000>;
interrupts = <0 85 0x04>;
+ clocks = <&clks 147>;
+ clock-names = "pwm";
+ status = "disabled";
};
pwm at 0208c000 { /* PWM4 */
+ compatible = "fsl,imx6q-pwm";
+ #pwm-cells = <2>;
reg = <0x0208c000 0x4000>;
interrupts = <0 86 0x04>;
+ clocks = <&clks 148>;
+ clock-names = "pwm";
+ status = "disabled";
};
flexcan at 02090000 { /* CAN1 */@@ -584,6 +604,54 @@
};
};
+ pwm1 {
+ pinctrl_pwm1_1: pwm1grp-1 {
+ fsl,pins = <1543 0x80000000>; /* MX6Q_PAD_SD1_DAT3__PWM1_PWMO */
+ };
+
+ pinctrl_pwm1_2: pwm1grp-2 {
+ fsl,pins = <971 0x80000000>; /* MX6Q_PAD_GPIO_9__PWM1_PWMO */
+ };
+
+ pinctrl_pwm1_3: pwm1grp-3 {
+ fsl,pins = <574 0x80000000>; /* MX6Q_PAD_DISP0_DAT8__PWM1_PWMO */
+ };
+ };
+
+ pwm2 {
+ pinctrl_pwm2_1: pwm2grp-1 {
+ fsl,pins = <1557 0x80000000>; /* MX6Q_PAD_SD1_DAT2__PWM2_PWMO */
+ };
+
+ pinctrl_pwm2_2: pwm2grp-2 {
+ fsl,pins = <963 0x80000000>; /* MX6Q_PAD_GPIO_1__PWM2_PWMO */
+ };
+
+ pinctrl_pwm2_3: pwm2grp-3 {
+ fsl,pins = <582 0x80000000>; /* MX6Q_PAD_DISP0_DAT8__PWM2_PWMO */
+ };
+ };
+
+ pwm3 {
+ pinctrl_pwm3_1: pwm3grp-1 {
+ fsl,pins = <1471 0x80000000>; /* MX6Q_PAD_SD4_DAT1__PWM3_PWMO */
+ };
+
+ pinctrl_pwm3_2: pwm3grp-2 {
+ fsl,pins = <1526 0x80000000>; /* MX6Q_PAD_SD1_DAT1__PWM3_PWMO */
+ };
+ };
+
+ pwm4 {
+ pinctrl_pwm4_1: pwm4grp-1 {
+ fsl,pins = <1479 0x80000000>; /* MX6Q_PAD_SD4_DAT2__PWM4_PWMO */
+ };
+
+ pinctrl_pwm4_2: pwm4grp-2 {
+ fsl,pins = <1550 0x80000000>; /* MX6Q_PAD_SD1_CMD__PWM4_PWMO */
+ };
+ };
+
usdhc3 {
pinctrl_usdhc3_1: usdhc3grp-1 {
fsl,pins = <1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */--
1.7.1
On Mon, Aug 27, 2012 at 05:34:31PM +0200, HACHIMI Samir wrote:
quoted hunk
From: Samir Hachimi <redacted>
Add clock look-up for pwm.
Add the pinmux support for pwm.
Several pin can be set to PwmO for the same Pwm.
Signed-off-by: Samir Hachimi <redacted>
---
arch/arm/boot/dts/imx6q.dtsi | 68 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 68 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 925da33..346ae9c 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -268,23 +268,43 @@
};
pwm at 02080000 { /* PWM1 */
+ compatible = "fsl,imx6q-pwm";
+ #pwm-cells = <2>;
reg = <0x02080000 0x4000>;
interrupts = <0 83 0x04>;
+ clocks = <&clks 145>;
+ clock-names = "pwm";
+ status = "disabled";
};
pwm at 02084000 { /* PWM2 */
+ compatible = "fsl,imx6q-pwm";
+ #pwm-cells = <2>;
reg = <0x02084000 0x4000>;
interrupts = <0 84 0x04>;
+ clocks = <&clks 146>;
+ clock-names = "pwm";
+ status = "disabled";
};
pwm at 02088000 { /* PWM3 */
+ compatible = "fsl,imx6q-pwm";
+ #pwm-cells = <2>;
reg = <0x02088000 0x4000>;
interrupts = <0 85 0x04>;
+ clocks = <&clks 147>;
+ clock-names = "pwm";
+ status = "disabled";
};
pwm at 0208c000 { /* PWM4 */
+ compatible = "fsl,imx6q-pwm";
+ #pwm-cells = <2>;
reg = <0x0208c000 0x4000>;
interrupts = <0 86 0x04>;
+ clocks = <&clks 148>;
+ clock-names = "pwm";
+ status = "disabled";
};
flexcan at 02090000 { /* CAN1 */@@ -584,6 +604,54 @@
};
};
+ pwm1 {
+ pinctrl_pwm1_1: pwm1grp-1 {
+ fsl,pins = <1543 0x80000000>; /* MX6Q_PAD_SD1_DAT3__PWM1_PWMO */
+ };
+
+ pinctrl_pwm1_2: pwm1grp-2 {
+ fsl,pins = <971 0x80000000>; /* MX6Q_PAD_GPIO_9__PWM1_PWMO */
+ };
+
+ pinctrl_pwm1_3: pwm1grp-3 {
+ fsl,pins = <574 0x80000000>; /* MX6Q_PAD_DISP0_DAT8__PWM1_PWMO */
+ };
Please do not enumerate all the possible options from the beginning.
Instead, you should only add the one your board uses. Then we can
know the added configuration is actually used and tested.
Regards,
Shawn
+ };
+
+ pwm2 {
+ pinctrl_pwm2_1: pwm2grp-1 {
+ fsl,pins = <1557 0x80000000>; /* MX6Q_PAD_SD1_DAT2__PWM2_PWMO */
+ };
+
+ pinctrl_pwm2_2: pwm2grp-2 {
+ fsl,pins = <963 0x80000000>; /* MX6Q_PAD_GPIO_1__PWM2_PWMO */
+ };
+
+ pinctrl_pwm2_3: pwm2grp-3 {
+ fsl,pins = <582 0x80000000>; /* MX6Q_PAD_DISP0_DAT8__PWM2_PWMO */
+ };
+ };
+
+ pwm3 {
+ pinctrl_pwm3_1: pwm3grp-1 {
+ fsl,pins = <1471 0x80000000>; /* MX6Q_PAD_SD4_DAT1__PWM3_PWMO */
+ };
+
+ pinctrl_pwm3_2: pwm3grp-2 {
+ fsl,pins = <1526 0x80000000>; /* MX6Q_PAD_SD1_DAT1__PWM3_PWMO */
+ };
+ };
+
+ pwm4 {
+ pinctrl_pwm4_1: pwm4grp-1 {
+ fsl,pins = <1479 0x80000000>; /* MX6Q_PAD_SD4_DAT2__PWM4_PWMO */
+ };
+
+ pinctrl_pwm4_2: pwm4grp-2 {
+ fsl,pins = <1550 0x80000000>; /* MX6Q_PAD_SD1_CMD__PWM4_PWMO */
+ };
+ };
+
usdhc3 {
pinctrl_usdhc3_1: usdhc3grp-1 {
fsl,pins = <1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
--
1.7.1