[PATCH 1/2] ARM: kirkwood: DT board setup for Seagate FreeAgent Dockstar

@@ -94,6 +94,13 @@ config MACH_TS219_DT
 	  or MV6282. If you have the wrong one, the buttons will not
 	  work.
 
+config MACH_DOCKSTAR_DT
+	bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Seagate FreeAgent Dockstar (Flattened Device Tree).
+
 config MACH_GOFLEXNET_DT
 	bool "Seagate GoFlex Net (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT

@@ -26,5 +26,6 @@ obj-$(CONFIG_MACH_ICONNECT_DT)		+= board-iconnect.o
 obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT)	+= board-dnskw.o
 obj-$(CONFIG_MACH_IB62X0_DT)		+= board-ib62x0.o
 obj-$(CONFIG_MACH_TS219_DT)		+= board-ts219.o tsx1x-common.o
+obj-$(CONFIG_MACH_DOCKSTAR_DT)		+= board-dockstar.o
 obj-$(CONFIG_MACH_GOFLEXNET_DT)		+= board-goflexnet.o
 obj-$(CONFIG_MACH_LSXL_DT)		+= board-lsxl.o

@@ -0,0 +1,61 @@
+/*
+ * arch/arm/mach-kirkwood/board-dockstar.c
+ *
+ * Seagate FreeAgent Dockstar Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Copied and modified for Seagate GoFlex Net support by
+ * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
+ * GoFlex kernel patches.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static unsigned int dockstar_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP46_GPIO,	/* LED green */
+	MPP47_GPIO,	/* LED orange */
+	0
+};
+
+void __init dockstar_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(dockstar_mpp_config);
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		pr_err("can't setup GPIO 29 (USB Power Enable)\n");
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&dockstar_ge00_data);
+}

@@ -81,6 +81,9 @@ static void __init kirkwood_dt_init(void)
 	if (of_machine_is_compatible("qnap,ts219"))
 		qnap_dt_ts219_init();
 
+	if (of_machine_is_compatible("seagate,dockstar"))
+		dockstar_init();
+
 	if (of_machine_is_compatible("seagate,goflexnet"))
 		goflexnet_init();
 

@@ -98,6 +101,7 @@ static const char *kirkwood_dt_board_compat[] = {
 	"iom,iconnect",
 	"raidsonic,ib-nas62x0",
 	"qnap,ts219",
+	"seagate,dockstar",
 	"seagate,goflexnet",
 	"buffalo,lsxl",
 	NULL

@@ -82,6 +82,12 @@ void ib62x0_init(void);
 static inline void ib62x0_init(void) {};
 #endif
 
+#ifdef CONFIG_MACH_DOCKSTAR_DT
+void dockstar_init(void);
+#else
+static inline void dockstar_init(void) {};
+#endif
+
 #ifdef CONFIG_MACH_GOFLEXNET_DT
 void goflexnet_init(void);
 #else

@@ -0,0 +1,57 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Seagate FreeAgent Dockstar";
+	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+	};
+
+	ocp at f1000000 {
+		serial at 12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand at 3000000 {
+			status = "okay";
+
+			partition at 0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition at 100000 {
+				label = "uImage";
+				reg = <0x0100000 0x400000>;
+			};
+
+			partition at 500000 {
+				label = "data";
+				reg = <0x0500000 0xfb00000>;
+			};
+		};
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 1>;
+			linux,default-trigger = "default-on";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 1>;
+		};
+	};
+};

@@ -11,3 +11,4 @@ dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-qnap-ts219.dtb
 dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
 dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
 dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
+dtb-$(CONFIG_MACH_DOCKSTAR_DT) += kirkwood-dockstar.dtb

@@ -94,6 +94,13 @@ config MACH_TS219_DT
 	  or MV6282. If you have the wrong one, the buttons will not
 	  work.
 
+config MACH_DOCKSTAR_DT
+	bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Seagate FreeAgent Dockstar (Flattened Device Tree).
+
 config MACH_GOFLEXNET_DT
 	bool "Seagate GoFlex Net (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT

@@ -26,5 +26,6 @@ obj-$(CONFIG_MACH_ICONNECT_DT)		+= board-iconnect.o
 obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT)	+= board-dnskw.o
 obj-$(CONFIG_MACH_IB62X0_DT)		+= board-ib62x0.o
 obj-$(CONFIG_MACH_TS219_DT)		+= board-ts219.o tsx1x-common.o
+obj-$(CONFIG_MACH_DOCKSTAR_DT)		+= board-dockstar.o
 obj-$(CONFIG_MACH_GOFLEXNET_DT)		+= board-goflexnet.o
 obj-$(CONFIG_MACH_LSXL_DT)		+= board-lsxl.o

@@ -0,0 +1,61 @@
+/*
+ * arch/arm/mach-kirkwood/board-dockstar.c
+ *
+ * Seagate FreeAgent Dockstar Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Copied and modified for Seagate GoFlex Net support by
+ * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
+ * GoFlex kernel patches.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static unsigned int dockstar_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP46_GPIO,	/* LED green */
+	MPP47_GPIO,	/* LED orange */
+	0
+};
+
+void __init dockstar_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(dockstar_mpp_config);
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		pr_err("can't setup GPIO 29 (USB Power Enable)\n");
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&dockstar_ge00_data);
+}

@@ -81,6 +81,9 @@ static void __init kirkwood_dt_init(void)
 	if (of_machine_is_compatible("qnap,ts219"))
 		qnap_dt_ts219_init();
 
+	if (of_machine_is_compatible("seagate,dockstar"))
+		dockstar_init();
+
 	if (of_machine_is_compatible("seagate,goflexnet"))
 		goflexnet_init();
 

@@ -98,6 +101,7 @@ static const char *kirkwood_dt_board_compat[] = {
 	"iom,iconnect",
 	"raidsonic,ib-nas62x0",
 	"qnap,ts219",
+	"seagate,dockstar",
 	"seagate,goflexnet",
 	"buffalo,lsxl",
 	NULL

@@ -82,6 +82,12 @@ void ib62x0_init(void);
 static inline void ib62x0_init(void) {};
 #endif
 
+#ifdef CONFIG_MACH_DOCKSTAR_DT
+void dockstar_init(void);
+#else
+static inline void dockstar_init(void) {};
+#endif
+
 #ifdef CONFIG_MACH_GOFLEXNET_DT
 void goflexnet_init(void);
 #else

@@ -0,0 +1,57 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Seagate FreeAgent Dockstar";
+	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+	};
+
+	ocp at f1000000 {
+		serial at 12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand at 3000000 {
+			status = "okay";
+
+			partition at 0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition at 100000 {
+				label = "uImage";
+				reg = <0x0100000 0x400000>;
+			};
+
+			partition at 500000 {
+				label = "data";
+				reg = <0x0500000 0xfb00000>;
+			};
+		};
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 1>;
+			linux,default-trigger = "default-on";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 1>;
+		};
+	};
+};

@@ -12,3 +12,4 @@ dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-ts219-6282.dtb
 dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
 dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
 dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
+dtb-$(CONFIG_MACH_DOCKSTAR_DT) += kirkwood-dockstar.dtb