[PATCH 1/2] ARM: mx23: Fix registers range

Subsystems: the rest

STALE5152d

7 messages, 4 authors, 2012-07-31 · open the first message on its own page

[PATCH 1/2] ARM: mx23: Fix registers range

From: festevam@gmail.com (Fabio Estevam)
Date: 2012-07-31 00:29:18

From: Fabio Estevam <redacted>

Fix registers range.

Signed-off-by: Fabio Estevam <redacted>
---
 arch/arm/boot/dts/imx23.dtsi |   52 +++++++++++++++++++++---------------------
 1 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index a874dbf..e613831 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi

@@ -51,11 +51,11 @@
 
 			dma-apbh at 80004000 {
 				compatible = "fsl,imx23-dma-apbh";
-				reg = <0x80004000 2000>;
+				reg = <0x80004000 0x2000>;
 			};
 
 			ecc at 80008000 {
-				reg = <0x80008000 2000>;
+				reg = <0x80008000 0x2000>;
 				status = "disabled";
 			};

@@ -63,7 +63,7 @@
 				compatible = "fsl,imx23-gpmi-nand";
 				#address-cells = <1>;
 				#size-cells = <1>;
-				reg = <0x8000c000 2000>, <0x8000a000 2000>;
+				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 				reg-names = "gpmi-nand", "bch";
 				interrupts = <13>, <56>;
 				interrupt-names = "gpmi-dma", "bch";

@@ -72,14 +72,14 @@
 			};
 
 			ssp0: ssp at 80010000 {
-				reg = <0x80010000 2000>;
+				reg = <0x80010000 0x2000>;
 				interrupts = <15 14>;
 				fsl,ssp-dma-channel = <1>;
 				status = "disabled";
 			};
 
 			etm at 80014000 {
-				reg = <0x80014000 2000>;
+				reg = <0x80014000 0x2000>;
 				status = "disabled";
 			};

@@ -87,7 +87,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx23-pinctrl", "simple-bus";
-				reg = <0x80018000 2000>;
+				reg = <0x80018000 0x2000>;
 
 				gpio0: gpio at 0 {
 					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";

@@ -273,32 +273,32 @@
 			};
 
 			emi at 80020000 {
-				reg = <0x80020000 2000>;
+				reg = <0x80020000 0x2000>;
 				status = "disabled";
 			};
 
 			dma-apbx at 80024000 {
 				compatible = "fsl,imx23-dma-apbx";
-				reg = <0x80024000 2000>;
+				reg = <0x80024000 0x2000>;
 			};
 
 			dcp at 80028000 {
-				reg = <0x80028000 2000>;
+				reg = <0x80028000 0x2000>;
 				status = "disabled";
 			};
 
 			pxp at 8002a000 {
-				reg = <0x8002a000 2000>;
+				reg = <0x8002a000 0x2000>;
 				status = "disabled";
 			};
 
 			ocotp at 8002c000 {
-				reg = <0x8002c000 2000>;
+				reg = <0x8002c000 0x2000>;
 				status = "disabled";
 			};
 
 			axi-ahb at 8002e000 {
-				reg = <0x8002e000 2000>;
+				reg = <0x8002e000 0x2000>;
 				status = "disabled";
 			};

@@ -310,14 +310,14 @@
 			};
 
 			ssp1: ssp at 80034000 {
-				reg = <0x80034000 2000>;
+				reg = <0x80034000 0x2000>;
 				interrupts = <2 20>;
 				fsl,ssp-dma-channel = <2>;
 				status = "disabled";
 			};
 
 			tvenc at 80038000 {
-				reg = <0x80038000 2000>;
+				reg = <0x80038000 0x2000>;
 				status = "disabled";
 			};
                 };

@@ -330,37 +330,37 @@
 			ranges;
 
 			clkctl at 80040000 {
-				reg = <0x80040000 2000>;
+				reg = <0x80040000 0x2000>;
 				status = "disabled";
 			};
 
 			saif0: saif at 80042000 {
-				reg = <0x80042000 2000>;
+				reg = <0x80042000 0x2000>;
 				status = "disabled";
 			};
 
 			power at 80044000 {
-				reg = <0x80044000 2000>;
+				reg = <0x80044000 0x2000>;
 				status = "disabled";
 			};
 
 			saif1: saif at 80046000 {
-				reg = <0x80046000 2000>;
+				reg = <0x80046000 0x2000>;
 				status = "disabled";
 			};
 
 			audio-out at 80048000 {
-				reg = <0x80048000 2000>;
+				reg = <0x80048000 0x2000>;
 				status = "disabled";
 			};
 
 			audio-in at 8004c000 {
-				reg = <0x8004c000 2000>;
+				reg = <0x8004c000 0x2000>;
 				status = "disabled";
 			};
 
 			lradc at 80050000 {
-				reg = <0x80050000 2000>;
+				reg = <0x80050000 0x2000>;
 				status = "disabled";
 			};

@@ -370,26 +370,26 @@
 			};
 
 			i2c at 80058000 {
-				reg = <0x80058000 2000>;
+				reg = <0x80058000 0x2000>;
 				status = "disabled";
 			};
 
 			rtc at 8005c000 {
 				compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
-				reg = <0x8005c000 2000>;
+				reg = <0x8005c000 0x2000>;
 				interrupts = <22>;
 			};
 
 			pwm: pwm at 80064000 {
 				compatible = "fsl,imx23-pwm";
-				reg = <0x80064000 2000>;
+				reg = <0x80064000 0x2000>;
 				#pwm-cells = <2>;
 				fsl,pwm-number = <5>;
 				status = "disabled";
 			};
 
 			timrot at 80068000 {
-				reg = <0x80068000 2000>;
+				reg = <0x80068000 0x2000>;
 				status = "disabled";
 			};

@@ -429,7 +429,7 @@
 		ranges;
 
 		usbctrl at 80080000 {
-			reg = <0x80080000 0x10000>;
+			reg = <0x80080000 0x40000>;
 			status = "disabled";
 		};
 	};

-- 
1.7.1

[PATCH 2/2] ARM: mx28: Fix registers range

From: festevam@gmail.com (Fabio Estevam)
Date: 2012-07-31 00:29:19

From: Fabio Estevam <redacted>

Fix registers range.

Signed-off-by: Fabio Estevam <redacted>
---
 arch/arm/boot/dts/imx28.dtsi |   74 +++++++++++++++++++++---------------------
 1 files changed, 37 insertions(+), 37 deletions(-)

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 787efac..3fa6d19 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi

@@ -57,18 +57,18 @@
 			};
 
 			hsadc at 80002000 {
-				reg = <0x80002000 2000>;
+				reg = <0x80002000 0x2000>;
 				interrupts = <13 87>;
 				status = "disabled";
 			};
 
 			dma-apbh at 80004000 {
 				compatible = "fsl,imx28-dma-apbh";
-				reg = <0x80004000 2000>;
+				reg = <0x80004000 0x2000>;
 			};
 
 			perfmon at 80006000 {
-				reg = <0x80006000 800>;
+				reg = <0x80006000 0x800>;
 				interrupts = <27>;
 				status = "disabled";
 			};

@@ -77,7 +77,7 @@
 				compatible = "fsl,imx28-gpmi-nand";
 				#address-cells = <1>;
 				#size-cells = <1>;
-				reg = <0x8000c000 2000>, <0x8000a000 2000>;
+				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 				reg-names = "gpmi-nand", "bch";
 				interrupts = <88>, <41>;
 				interrupt-names = "gpmi-dma", "bch";

@@ -86,28 +86,28 @@
 			};
 
 			ssp0: ssp at 80010000 {
-				reg = <0x80010000 2000>;
+				reg = <0x80010000 0x2000>;
 				interrupts = <96 82>;
 				fsl,ssp-dma-channel = <0>;
 				status = "disabled";
 			};
 
 			ssp1: ssp at 80012000 {
-				reg = <0x80012000 2000>;
+				reg = <0x80012000 0x2000>;
 				interrupts = <97 83>;
 				fsl,ssp-dma-channel = <1>;
 				status = "disabled";
 			};
 
 			ssp2: ssp at 80014000 {
-				reg = <0x80014000 2000>;
+				reg = <0x80014000 0x2000>;
 				interrupts = <98 84>;
 				fsl,ssp-dma-channel = <2>;
 				status = "disabled";
 			};
 
 			ssp3: ssp at 80016000 {
-				reg = <0x80016000 2000>;
+				reg = <0x80016000 0x2000>;
 				interrupts = <99 85>;
 				fsl,ssp-dma-channel = <3>;
 				status = "disabled";

@@ -117,7 +117,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx28-pinctrl", "simple-bus";
-				reg = <0x80018000 2000>;
+				reg = <0x80018000 0x2000>;
 
 				gpio0: gpio at 0 {
 					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";

@@ -510,96 +510,96 @@
 			};
 
 			digctl at 8001c000 {
-				reg = <0x8001c000 2000>;
+				reg = <0x8001c000 0x2000>;
 				interrupts = <89>;
 				status = "disabled";
 			};
 
 			etm at 80022000 {
-				reg = <0x80022000 2000>;
+				reg = <0x80022000 0x2000>;
 				status = "disabled";
 			};
 
 			dma-apbx at 80024000 {
 				compatible = "fsl,imx28-dma-apbx";
-				reg = <0x80024000 2000>;
+				reg = <0x80024000 0x2000>;
 			};
 
 			dcp at 80028000 {
-				reg = <0x80028000 2000>;
+				reg = <0x80028000 0x2000>;
 				interrupts = <52 53 54>;
 				status = "disabled";
 			};
 
 			pxp at 8002a000 {
-				reg = <0x8002a000 2000>;
+				reg = <0x8002a000 0x2000>;
 				interrupts = <39>;
 				status = "disabled";
 			};
 
 			ocotp at 8002c000 {
-				reg = <0x8002c000 2000>;
+				reg = <0x8002c000 0x2000>;
 				status = "disabled";
 			};
 
 			axi-ahb at 8002e000 {
-				reg = <0x8002e000 2000>;
+				reg = <0x8002e000 0x2000>;
 				status = "disabled";
 			};
 
 			lcdif at 80030000 {
 				compatible = "fsl,imx28-lcdif";
-				reg = <0x80030000 2000>;
+				reg = <0x80030000 0x2000>;
 				interrupts = <38 86>;
 				status = "disabled";
 			};
 
 			can0: can at 80032000 {
 				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
-				reg = <0x80032000 2000>;
+				reg = <0x80032000 0x2000>;
 				interrupts = <8>;
 				status = "disabled";
 			};
 
 			can1: can at 80034000 {
 				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
-				reg = <0x80034000 2000>;
+				reg = <0x80034000 0x2000>;
 				interrupts = <9>;
 				status = "disabled";
 			};
 
 			simdbg at 8003c000 {
-				reg = <0x8003c000 200>;
+				reg = <0x8003c000 0x200>;
 				status = "disabled";
 			};
 
 			simgpmisel at 8003c200 {
-				reg = <0x8003c200 100>;
+				reg = <0x8003c200 0x100>;
 				status = "disabled";
 			};
 
 			simsspsel at 8003c300 {
-				reg = <0x8003c300 100>;
+				reg = <0x8003c300 0x100>;
 				status = "disabled";
 			};
 
 			simmemsel at 8003c400 {
-				reg = <0x8003c400 100>;
+				reg = <0x8003c400 0x100>;
 				status = "disabled";
 			};
 
 			gpiomon at 8003c500 {
-				reg = <0x8003c500 100>;
+				reg = <0x8003c500 0x100>;
 				status = "disabled";
 			};
 
 			simenet at 8003c700 {
-				reg = <0x8003c700 100>;
+				reg = <0x8003c700 0x100>;
 				status = "disabled";
 			};
 
 			armjtag at 8003c800 {
-				reg = <0x8003c800 100>;
+				reg = <0x8003c800 0x100>;
 				status = "disabled";
 			};
                 };

@@ -612,45 +612,45 @@
 			ranges;
 
 			clkctl at 80040000 {
-				reg = <0x80040000 2000>;
+				reg = <0x80040000 0x2000>;
 				status = "disabled";
 			};
 
 			saif0: saif at 80042000 {
 				compatible = "fsl,imx28-saif";
-				reg = <0x80042000 2000>;
+				reg = <0x80042000 0x2000>;
 				interrupts = <59 80>;
 				fsl,saif-dma-channel = <4>;
 				status = "disabled";
 			};
 
 			power at 80044000 {
-				reg = <0x80044000 2000>;
+				reg = <0x80044000 0x2000>;
 				status = "disabled";
 			};
 
 			saif1: saif at 80046000 {
 				compatible = "fsl,imx28-saif";
-				reg = <0x80046000 2000>;
+				reg = <0x80046000 0x2000>;
 				interrupts = <58 81>;
 				fsl,saif-dma-channel = <5>;
 				status = "disabled";
 			};
 
 			lradc at 80050000 {
-				reg = <0x80050000 2000>;
+				reg = <0x80050000 0x2000>;
 				status = "disabled";
 			};
 
 			spdif at 80054000 {
-				reg = <0x80054000 2000>;
+				reg = <0x80054000 0x2000>;
 				interrupts = <45 66>;
 				status = "disabled";
 			};
 
 			rtc at 80056000 {
 				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
-				reg = <0x80056000 2000>;
+				reg = <0x80056000 0x2000>;
 				interrupts = <29>;
 			};

@@ -658,7 +658,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx28-i2c";
-				reg = <0x80058000 2000>;
+				reg = <0x80058000 0x2000>;
 				interrupts = <111 68>;
 				clock-frequency = <100000>;
 				status = "disabled";

@@ -668,7 +668,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx28-i2c";
-				reg = <0x8005a000 2000>;
+				reg = <0x8005a000 0x2000>;
 				interrupts = <110 69>;
 				clock-frequency = <100000>;
 				status = "disabled";

@@ -676,14 +676,14 @@
 
 			pwm: pwm at 80064000 {
 				compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
-				reg = <0x80064000 2000>;
+				reg = <0x80064000 0x2000>;
 				#pwm-cells = <2>;
 				fsl,pwm-number = <8>;
 				status = "disabled";
 			};
 
 			timrot at 80068000 {
-				reg = <0x80068000 2000>;
+				reg = <0x80068000 0x2000>;
 				status = "disabled";
 			};

-- 
1.7.1

[PATCH 2/2] ARM: mx28: Fix registers range

From: Marek Vasut <hidden>
Date: 2012-07-31 00:35:13

Dear Fabio Estevam,

From: Fabio Estevam <redacted>

Fix registers range.

Signed-off-by: Fabio Estevam <redacted>

Acked-by: Marek Vasut <marex@denx.de>

[...]

Best regards,
Marek Vasut

[PATCH 1/2] ARM: mx23: Fix registers range

From: Marek Vasut <hidden>
Date: 2012-07-31 00:35:21

Dear Fabio Estevam,

From: Fabio Estevam <redacted>

Fix registers range.

Signed-off-by: Fabio Estevam <redacted>

Acked-by: Marek Vasut <marex@denx.de>

[...]

Best regards,
Marek Vasut

[PATCH 1/2] ARM: mx23: Fix registers range

From: Shawn Guo <hidden>
Date: 2012-07-31 00:53:31

On Mon, Jul 30, 2012 at 09:29:18PM -0300, Fabio Estevam wrote:

From: Fabio Estevam <redacted>

Fix registers range.

Signed-off-by: Fabio Estevam <redacted>
---

Queued both for 3.6-rc, thanks.

-- 
Regards,
Shawn

[PATCH 1/2] ARM: mx23: Fix registers range

From: mkl@pengutronix.de (Marc Kleine-Budde)
Date: 2012-07-31 09:16:06

On 07/31/2012 02:53 AM, Shawn Guo wrote:

On Mon, Jul 30, 2012 at 09:29:18PM -0300, Fabio Estevam wrote:

quoted

From: Fabio Estevam <redacted>

Fix registers range.

Signed-off-by: Fabio Estevam <redacted>
---

Queued both for 3.6-rc, thanks.

Can you put stable on Cc?

Marc
-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 262 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120731/527f8957/attachment.sig>

[PATCH 1/2] ARM: mx23: Fix registers range

From: Shawn Guo <hidden>
Date: 2012-07-31 09:20:29

On 31 July 2012 17:16, Marc Kleine-Budde [off-list ref] wrote:

Can you put stable on Cc?

Though it's not causing any problem right now, copying stable is still
a good idea.  Yes, will do.

Thanks,
Shawn

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help