Mike,
Please pull DT clk binding and highbank clk support for 3.6. The only
real change from 3.5 pull request is returning error values rather than
NULL to align with the rest of the clk framework. There's been a little
discussion but otherwise has been quiet.
Rob
The following changes since commit 6887a4131da3adaab011613776d865f4bcfb5678:
Linux 3.5-rc5 (2012-06-30 16:08:57 -0700)
are available in the git repository at:
git://sources.calxeda.com/kernel/linux.git clk-for-3.6
for you to fetch changes up to 39a8e38a03823c3acaec02c6d7c551e268cb2139:
clk: add highbank clock support (2012-07-01 17:04:45 -0500)
----------------------------------------------------------------
Grant Likely (2):
clk: add DT clock binding support
clk: add DT fixed-clock binding support
Rob Herring (2):
dt: add clock binding doc to primecell bindings
clk: add highbank clock support
.../devicetree/bindings/arm/primecell.txt | 6 +
.../devicetree/bindings/clock/calxeda.txt | 17 +
.../devicetree/bindings/clock/clock-bindings.txt | 117 +++++++
.../devicetree/bindings/clock/fixed-clock.txt | 21 ++
arch/arm/Kconfig | 1 +
arch/arm/boot/dts/highbank.dts | 91 +++++-
arch/arm/mach-highbank/Makefile | 2 +-
arch/arm/mach-highbank/clock.c | 62 ----
arch/arm/mach-highbank/highbank.c | 7 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-fixed-rate.c | 23 ++
drivers/clk/clk-highbank.c | 345
++++++++++++++++++++
drivers/clk/clk.c | 140 ++++++++
drivers/clk/clkdev.c | 77 +++++
include/linux/clk-provider.h | 16 +
include/linux/clk.h | 19 ++
16 files changed, 881 insertions(+), 64 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/calxeda.txt
create mode 100644
Documentation/devicetree/bindings/clock/clock-bindings.txt
create mode 100644 Documentation/devicetree/bindings/clock/fixed-clock.txt
delete mode 100644 arch/arm/mach-highbank/clock.c
create mode 100644 drivers/clk/clk-highbank.c
On 20120707-12:03, Rob Herring wrote:
Mike,
Please pull DT clk binding and highbank clk support for 3.6. The only
real change from 3.5 pull request is returning error values rather than
NULL to align with the rest of the clk framework. There's been a little
discussion but otherwise has been quiet.
Hi Rob,
I agree that these patches have seen enough time on the list. I did
find one problem in testing: the high bank clock registration function
writes to clk_hb->hw.init which is marked const. I fixed it up in the
below patch. That fix is now squashed into into the final patch in your
series on the clk-next branch. Let me know if you have any objections.
Regards,
Mike
diff --git a/drivers/clk/clk-highbank.c b/drivers/clk/clk-highbank.c
index 2f61065..52fecad 100644
--- a/drivers/clk/clk-highbank.c
+++ b/drivers/clk/clk-highbank.c
@@ -277,7 +277,7 @@ static __init struct clk *hb_clk_init(struct device_node *node, const struct clk
struct hb_clk *hb_clk;
const char *clk_name = node->name;
const char *parent_name;
- struct clk_init_data init_data;
+ struct clk_init_data init;
int rc;
rc = of_property_read_u32(node, "reg", ®);
@@ -292,13 +292,14 @@ static __init struct clk *hb_clk_init(struct device_node *node, const struct clk
of_property_read_string(node, "clock-output-names", &clk_name);
- hb_clk->hw.init = &init_data;
- hb_clk->hw.init->name = clk_name;
- hb_clk->hw.init->num_parents = 1;
+ init.name = clk_name;
+ init.ops = ops;
+ init.flags = 0;
parent_name = of_clk_get_parent_name(node, 0);
- hb_clk->hw.init->parent_names = &parent_name;
- hb_clk->hw.init->ops = ops;
- hb_clk->hw.init->flags = 0;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ hb_clk->hw.init = &init;
clk = clk_register(NULL, &hb_clk->hw);
if (WARN_ON(IS_ERR(clk))) {
Rob
The following changes since commit 6887a4131da3adaab011613776d865f4bcfb5678:
Linux 3.5-rc5 (2012-06-30 16:08:57 -0700)
are available in the git repository at:
git://sources.calxeda.com/kernel/linux.git clk-for-3.6
for you to fetch changes up to 39a8e38a03823c3acaec02c6d7c551e268cb2139:
clk: add highbank clock support (2012-07-01 17:04:45 -0500)
----------------------------------------------------------------
Grant Likely (2):
clk: add DT clock binding support
clk: add DT fixed-clock binding support
Rob Herring (2):
dt: add clock binding doc to primecell bindings
clk: add highbank clock support
.../devicetree/bindings/arm/primecell.txt | 6 +
.../devicetree/bindings/clock/calxeda.txt | 17 +
.../devicetree/bindings/clock/clock-bindings.txt | 117 +++++++
.../devicetree/bindings/clock/fixed-clock.txt | 21 ++
arch/arm/Kconfig | 1 +
arch/arm/boot/dts/highbank.dts | 91 +++++-
arch/arm/mach-highbank/Makefile | 2 +-
arch/arm/mach-highbank/clock.c | 62 ----
arch/arm/mach-highbank/highbank.c | 7 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-fixed-rate.c | 23 ++
drivers/clk/clk-highbank.c | 345
++++++++++++++++++++
drivers/clk/clk.c | 140 ++++++++
drivers/clk/clkdev.c | 77 +++++
include/linux/clk-provider.h | 16 +
include/linux/clk.h | 19 ++
16 files changed, 881 insertions(+), 64 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/calxeda.txt
create mode 100644
Documentation/devicetree/bindings/clock/clock-bindings.txt
create mode 100644 Documentation/devicetree/bindings/clock/fixed-clock.txt
delete mode 100644 arch/arm/mach-highbank/clock.c
create mode 100644 drivers/clk/clk-highbank.c
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel