[PATCH 2 of 2] ARM: imx: fix mx51 ehci setup errors
From: Benoît Thébaudeau <hidden>
Date: 2012-06-28 14:59:46
This patch completes commit 08406f5 by fixing the following issues, according to the reference manual: * MXC_OTG_UCTRL_OPM_BIT disables (masks) the power/oc pins if set, like H1PM and H2PM, not the opposite. * MXC_OTG_PHYCTRL_OC_DIS_BIT disables the oc pin if set, like H1_OC_DIS, not the opposite. * Typos in comments. Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Arnaud Patard (Rtp) <redacted> Cc: <redacted> Signed-off-by: Beno?t Th?baudeau <redacted> --- .../arch/arm/mach-imx/ehci-imx5.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
diff --git linux-next-HEAD-49289f3.orig/arch/arm/mach-imx/ehci-imx5.c linux-next-HEAD-49289f3/arch/arm/mach-imx/ehci-imx5.c
index 49e3b34..a6a4afb 100644
--- linux-next-HEAD-49289f3.orig/arch/arm/mach-imx/ehci-imx5.c
+++ linux-next-HEAD-49289f3/arch/arm/mach-imx/ehci-imx5.c@@ -88,11 +88,11 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) else v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT; if (flags & MXC_EHCI_POWER_PINS_ENABLED) { - /* OC/USBPWR is not used */ - v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; - } else { /* OC/USBPWR is used */ v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT; + } else { + /* OC/USBPWR is not used */ + v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; } if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) v |= MXC_OTG_PHYCTRL_PWR_POL_BIT;
@@ -106,9 +106,9 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) else v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */ if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v |= MXC_OTG_UCTRL_OPM_BIT; - else v &= ~MXC_OTG_UCTRL_OPM_BIT; + else + v |= MXC_OTG_UCTRL_OPM_BIT; __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); } break;
@@ -124,7 +124,7 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) } if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ + v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask unused*/ else v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
@@ -157,7 +157,7 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) } if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ + v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask unused*/ else v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);