[PATCH 2/2] mmc: sdhci-s3c: Enable runtime power management

Subsystems: multimedia card (mmc), secure digital (sd) and sdio subsystem, secure digital host controller interface (sdhci) driver, secure digital host controller interface (sdhci) samsung driver, the rest

STALE5260d REVIEWED: 2 (2M)

1 review trailer (1 from subsystem maintainers).

2 messages, 2 authors, 2012-03-09 · open the first message on its own page

[PATCH 2/2] mmc: sdhci-s3c: Enable runtime power management

From: Chris Ball <hidden>
Date: 2012-03-09 05:08:58

Hi,

On Fri, Mar 02 2012, Mark Brown wrote:
quoted hunk
Since most of the work is already done by the core we just need to add
runtime suspend methods and tell the PM core that runtime PM is enabled
for this device.

Signed-off-by: Mark Brown <redacted>
---
 drivers/mmc/host/sdhci-s3c.c |   28 ++++++++++++++++++++++++++++
 1 files changed, 28 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 46152d6..6926ac9 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -23,6 +23,7 @@
 #include <linux/of.h>
 #include <linux/of_gpio.h>
 #include <linux/pm.h>
+#include <linux/pm_runtime.h>
 
 #include <linux/mmc/host.h>
 
@@ -721,6 +722,11 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 	if (pdata->host_caps2)
 		host->mmc->caps2 |= pdata->host_caps2;
 
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_suspend_ignore_children(&pdev->dev, 1);
+
 	ret = sdhci_add_host(host);
 	if (ret) {
 		dev_err(dev, "sdhci_add_host() failed\n");
@@ -740,6 +746,8 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 
  err_add_host:
 	release_resource(sc->ioarea);
+	pm_runtime_forbid(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
 	kfree(sc->ioarea);
 
  err_req_regs:
@@ -784,6 +792,8 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
 
 	sdhci_remove_host(host, 1);
 
+	pm_runtime_disable(&pdev->dev);
+
 	for (ptr = 0; ptr < 3; ptr++) {
 		if (sc->clk_bus[ptr]) {
 			clk_disable(sc->clk_bus[ptr]);
@@ -824,9 +834,27 @@ static int sdhci_s3c_resume(struct device *dev)
 }
 #endif
 
+#ifdef CONFIG_PM_RUNTIME
+static int sdhci_s3c_runtime_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	return sdhci_runtime_suspend_host(host);
+}
+
+static int sdhci_s3c_runtime_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	return sdhci_runtime_resume_host(host);
+}
+#endif
+
 #ifdef CONFIG_PM
 static const struct dev_pm_ops sdhci_s3c_pmops = {
 	SET_SYSTEM_SLEEP_PM_OPS(sdhci_s3c_suspend, sdhci_s3c_resume)
+	SET_RUNTIME_PM_OPS(sdhci_s3c_runtime_suspend, sdhci_s3c_runtime_resume,
+			   NULL)
 };
 
 #define SDHCI_S3C_PMOPS (&sdhci_s3c_pmops)
I had to rework this patch to avoid a conflict with Julia Lawall's patch
"mmc: sdhci-s3c: use devm_ functions": https://lkml.org/lkml/2012/2/18/76

The reworked patch is below, please let me know if it looks incorrect:

From: Mark Brown <redacted>
Subject: [PATCH] mmc: sdhci-s3c: Enable runtime power management

Since most of the work is already done by the core we just need to add
runtime suspend methods and tell the PM core that runtime PM is enabled
for this device.

Signed-off-by: Mark Brown <redacted>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <redacted>
---
 drivers/mmc/host/sdhci-s3c.c |   28 ++++++++++++++++++++++++++++
 1 files changed, 28 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 9683322..312aaf4 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -23,6 +23,7 @@
 #include <linux/of.h>
 #include <linux/of_gpio.h>
 #include <linux/pm.h>
+#include <linux/pm_runtime.h>
 
 #include <linux/mmc/host.h>
 
@@ -705,9 +706,16 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 	if (pdata->host_caps)
 		host->mmc->caps |= pdata->host_caps;
 
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_suspend_ignore_children(&pdev->dev, 1);
+
 	ret = sdhci_add_host(host);
 	if (ret) {
 		dev_err(dev, "sdhci_add_host() failed\n");
+		pm_runtime_forbid(&pdev->dev);
+		pm_runtime_get_noresume(&pdev->dev);
 		goto err_req_regs;
 	}
 
@@ -764,6 +772,8 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
 
 	sdhci_remove_host(host, 1);
 
+	pm_runtime_disable(&pdev->dev);
+
 	for (ptr = 0; ptr < 3; ptr++) {
 		if (sc->clk_bus[ptr]) {
 			clk_disable(sc->clk_bus[ptr]);
@@ -800,9 +810,27 @@ static int sdhci_s3c_resume(struct device *dev)
 }
 #endif
 
+#ifdef CONFIG_PM_RUNTIME
+static int sdhci_s3c_runtime_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	return sdhci_runtime_suspend_host(host);
+}
+
+static int sdhci_s3c_runtime_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	return sdhci_runtime_resume_host(host);
+}
+#endif
+
 #ifdef CONFIG_PM
 static const struct dev_pm_ops sdhci_s3c_pmops = {
 	SET_SYSTEM_SLEEP_PM_OPS(sdhci_s3c_suspend, sdhci_s3c_resume)
+	SET_RUNTIME_PM_OPS(sdhci_s3c_runtime_suspend, sdhci_s3c_runtime_resume,
+			   NULL)
 };
 
 #define SDHCI_S3C_PMOPS (&sdhci_s3c_pmops)
-- 
Chris Ball   <cjb@laptop.org>   <http://printf.net/>
One Laptop Per Child

[PATCH 2/2] mmc: sdhci-s3c: Enable runtime power management

From: Mark Brown <hidden>
Date: 2012-03-09 12:26:06

On Fri, Mar 09, 2012 at 12:08:58AM -0500, Chris Ball wrote:
The reworked patch is below, please let me know if it looks incorrect:
That looks about right, I'll find out soon enough if it doesn't work in
-next as my main development system has the rootfs on this device :)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120309/22cf3130/attachment-0001.sig>
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help