Hi Grant,
I've given this a final review and testing and I believe it's ready for
3.4, so here you go.
Also note that Benoit's recently posted GPIO cleanups and DT conversion
depend on this series.
Thanks,
Kevin
The following changes since commit 62aa2b537c6f5957afd98e29f96897419ed5ebab:
Linux 3.3-rc2 (2012-01-31 13:31:54 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git for_3.4/gpio/runtime-pm-cleanup
for you to fetch changes up to f86bcc302a8c570dd0f5a50097a6af96a0e717c2:
gpio/omap: handle set_dataout reg capable IP on restore (2012-02-06 16:58:45 +0530)
----------------------------------------------------------------
Charulatha V (8):
gpio/omap: remove dependency on gpio_bank_count
gpio/omap: use flag to identify wakeup domain
gpio/omap: make gpio_context part of gpio_bank structure
gpio/omap: make non-wakeup GPIO part of pdata
gpio/omap: avoid cpu checks during module ena/disable
gpio/omap: use pinctrl offset instead of macro
gpio/omap: remove bank->method & METHOD_* macros
gpio/omap: fix bankwidth for OMAP7xx MPUIO
Nishanth Menon (4):
gpio/omap: save and restore debounce registers
gpio/omap: enable irq at the end of all configuration in restore
gpio/omap: restore OE only after setting the output level
gpio/omap: handle set_dataout reg capable IP on restore
Tarun Kanti DebBarma (13):
gpio/omap: handle save/restore context in GPIO driver
gpio/omap: further cleanup using wkup_en register
gpio/omap: use level/edge detect reg offsets
gpio/omap: remove hardcoded offsets in context save/restore
gpio/omap: cleanup set_gpio_triggering function
gpio/omap: cleanup omap_gpio_mod_init function
gpio/omap: remove unnecessary bit-masking for read access
gpio/omap: use pm-runtime framework
gpio/omap: optimize suspend and resume functions
gpio/omap: cleanup prepare_for_idle and resume_after_idle
gpio/omap: fix debounce clock handling
gpio/omap: fix incorrect access of debounce module
gpio/omap: remove omap_gpio_save_context overhead
arch/arm/mach-omap1/gpio15xx.c | 7 +-
arch/arm/mach-omap1/gpio16xx.c | 47 ++-
arch/arm/mach-omap1/gpio7xx.c | 14 +-
arch/arm/mach-omap2/gpio.c | 36 +-
arch/arm/mach-omap2/pm34xx.c | 14 -
arch/arm/plat-omap/include/plat/gpio.h | 29 +-
drivers/gpio/gpio-omap.c | 1106 +++++++++++++-------------------
7 files changed, 555 insertions(+), 698 deletions(-)
Hi Grant,
Any objections to this series? Can we get this queued and into linux-next?
I'll have an additional pull request for Benoit's GPIO DT stuff that
depends on this for v3.4 too after that series is finalized.
Thanks,
Kevin
On 02/16/2012 12:43 PM, Kevin Hilman wrote:
Hi Grant,
I've given this a final review and testing and I believe it's ready for
3.4, so here you go.
Also note that Benoit's recently posted GPIO cleanups and DT conversion
depend on this series.
Thanks,
Kevin
The following changes since commit 62aa2b537c6f5957afd98e29f96897419ed5ebab:
Linux 3.3-rc2 (2012-01-31 13:31:54 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git for_3.4/gpio/runtime-pm-cleanup
for you to fetch changes up to f86bcc302a8c570dd0f5a50097a6af96a0e717c2:
gpio/omap: handle set_dataout reg capable IP on restore (2012-02-06 16:58:45 +0530)
----------------------------------------------------------------
Charulatha V (8):
gpio/omap: remove dependency on gpio_bank_count
gpio/omap: use flag to identify wakeup domain
gpio/omap: make gpio_context part of gpio_bank structure
gpio/omap: make non-wakeup GPIO part of pdata
gpio/omap: avoid cpu checks during module ena/disable
gpio/omap: use pinctrl offset instead of macro
gpio/omap: remove bank->method& METHOD_* macros
gpio/omap: fix bankwidth for OMAP7xx MPUIO
Nishanth Menon (4):
gpio/omap: save and restore debounce registers
gpio/omap: enable irq at the end of all configuration in restore
gpio/omap: restore OE only after setting the output level
gpio/omap: handle set_dataout reg capable IP on restore
Tarun Kanti DebBarma (13):
gpio/omap: handle save/restore context in GPIO driver
gpio/omap: further cleanup using wkup_en register
gpio/omap: use level/edge detect reg offsets
gpio/omap: remove hardcoded offsets in context save/restore
gpio/omap: cleanup set_gpio_triggering function
gpio/omap: cleanup omap_gpio_mod_init function
gpio/omap: remove unnecessary bit-masking for read access
gpio/omap: use pm-runtime framework
gpio/omap: optimize suspend and resume functions
gpio/omap: cleanup prepare_for_idle and resume_after_idle
gpio/omap: fix debounce clock handling
gpio/omap: fix incorrect access of debounce module
gpio/omap: remove omap_gpio_save_context overhead
arch/arm/mach-omap1/gpio15xx.c | 7 +-
arch/arm/mach-omap1/gpio16xx.c | 47 ++-
arch/arm/mach-omap1/gpio7xx.c | 14 +-
arch/arm/mach-omap2/gpio.c | 36 +-
arch/arm/mach-omap2/pm34xx.c | 14 -
arch/arm/plat-omap/include/plat/gpio.h | 29 +-
drivers/gpio/gpio-omap.c | 1106 +++++++++++++-------------------
7 files changed, 555 insertions(+), 698 deletions(-)
On Wed, Feb 22, 2012 at 02:41:05PM -0800, Kevin Hilman wrote:
Hi Grant,
Any objections to this series? Can we get this queued and into linux-next?
I'll have an additional pull request for Benoit's GPIO DT stuff that
depends on this for v3.4 too after that series is finalized.
The diffstat is clean. I've merged it in.
g.
Thanks,
Kevin
On 02/16/2012 12:43 PM, Kevin Hilman wrote:
quoted
Hi Grant,
I've given this a final review and testing and I believe it's ready for
3.4, so here you go.
Also note that Benoit's recently posted GPIO cleanups and DT conversion
depend on this series.
Thanks,
Kevin
The following changes since commit 62aa2b537c6f5957afd98e29f96897419ed5ebab:
Linux 3.3-rc2 (2012-01-31 13:31:54 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git for_3.4/gpio/runtime-pm-cleanup
for you to fetch changes up to f86bcc302a8c570dd0f5a50097a6af96a0e717c2:
gpio/omap: handle set_dataout reg capable IP on restore (2012-02-06 16:58:45 +0530)
----------------------------------------------------------------
Charulatha V (8):
gpio/omap: remove dependency on gpio_bank_count
gpio/omap: use flag to identify wakeup domain
gpio/omap: make gpio_context part of gpio_bank structure
gpio/omap: make non-wakeup GPIO part of pdata
gpio/omap: avoid cpu checks during module ena/disable
gpio/omap: use pinctrl offset instead of macro
gpio/omap: remove bank->method& METHOD_* macros
gpio/omap: fix bankwidth for OMAP7xx MPUIO
Nishanth Menon (4):
gpio/omap: save and restore debounce registers
gpio/omap: enable irq at the end of all configuration in restore
gpio/omap: restore OE only after setting the output level
gpio/omap: handle set_dataout reg capable IP on restore
Tarun Kanti DebBarma (13):
gpio/omap: handle save/restore context in GPIO driver
gpio/omap: further cleanup using wkup_en register
gpio/omap: use level/edge detect reg offsets
gpio/omap: remove hardcoded offsets in context save/restore
gpio/omap: cleanup set_gpio_triggering function
gpio/omap: cleanup omap_gpio_mod_init function
gpio/omap: remove unnecessary bit-masking for read access
gpio/omap: use pm-runtime framework
gpio/omap: optimize suspend and resume functions
gpio/omap: cleanup prepare_for_idle and resume_after_idle
gpio/omap: fix debounce clock handling
gpio/omap: fix incorrect access of debounce module
gpio/omap: remove omap_gpio_save_context overhead
arch/arm/mach-omap1/gpio15xx.c | 7 +-
arch/arm/mach-omap1/gpio16xx.c | 47 ++-
arch/arm/mach-omap1/gpio7xx.c | 14 +-
arch/arm/mach-omap2/gpio.c | 36 +-
arch/arm/mach-omap2/pm34xx.c | 14 -
arch/arm/plat-omap/include/plat/gpio.h | 29 +-
drivers/gpio/gpio-omap.c | 1106 +++++++++++++-------------------
7 files changed, 555 insertions(+), 698 deletions(-)